CSIT-530: Add common setup and teardown to perf tests

Change-Id: I2e76de710b4b758eac1d24d447a9c5938f937385
Signed-off-by: Tibor Frank <tifrank@cisco.com>

1 files changed, 63 insertions, 67 deletions

diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
index 3aaa770ad3..df0083e3ad 100644
--- a/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
+++ b/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2017 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -14,16 +14,21 @@
 *** Settings ***
 | Resource | resources/libraries/robot/performance.robot
 | Library | resources.libraries.python.Classify.Classify
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4
-| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']}
+| ... | WITH NAME | dut1_v4
+| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']}
+| ... | WITH NAME | dut2_v4
+| ...
 | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK
-| ...        | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
+| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST
+| ...
 | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
 | ... | L3 | Intel-X520-DA2
 | Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs
-| ...           | AND          | Show vpp trace dump on all DUTs
+| ...
+| Test Setup | Performance test setup
+| Test Teardown | Performance ndrchk test teardown
+| ...
 | Documentation | *Reference NDR throughput IPv4 whitelist verify test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
@@ -54,13 +59,12 @@
 | | ... | at 2x 3.1mpps.
 | | [Tags] | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 3.1mpps
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -75,8 +79,8 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -86,13 +90,12 @@
 | | ... | at 2x 812743pps.
 | | [Tags] | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -107,8 +110,8 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then  Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                    | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -118,12 +121,11 @@
 | | ... | at 2x 138580pps.
 | | [Tags] | 1T1C | STHREAD
 | | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -138,8 +140,8 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc04-64B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -149,13 +151,12 @@
 | | ... | at 2x 5.8mpps.
 | | [Tags] | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 5.8mpps
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -170,8 +171,8 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc05-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -181,13 +182,12 @@
 | | ... | at 2x 812743pps.
 | | [Tags] | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -202,8 +202,8 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc06-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -213,12 +213,11 @@
 | | ... | at 2x 138580pps.
 | | [Tags] | 2T2C | MTHREAD
 | | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -233,8 +232,8 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc07-64B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -244,13 +243,12 @@
 | | ... | at 2x 7.8mpps.
 | | [Tags] | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 7.8mpps
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | And   IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -265,8 +263,8 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc08-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -276,13 +274,12 @@
 | | ... | at 2x 812743pps.
 | | [Tags] | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 812743pps
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Add No Multi Seg to all DUTs
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -297,8 +294,8 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4
 
 | tc09-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrchk
 | | [Documentation]
@@ -308,12 +305,11 @@
 | | ... | at 2x 138580pps.
 | | [Tags] | 4T4C | MTHREAD
 | | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
 | | ${rate}= | Set Variable | 138580pps
 | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo
-| | And   Add PCI devices to DUTs from 3-node single link topology
-| | And   Apply startup configuration on all VPP DUTs
-| | When  IPv4 forwarding initialized in a 3-node circular topology
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv4 forwarding initialized in a 3-node circular topology
 | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3
 | | ... | ${dut1} | ip4 | dst
 | | And Vpp Configures Classify Session L3
@@ -328,5 +324,5 @@
 | | ... | ip4 | dst | 10.10.10.2
 | | And Vpp Enable Input Acl Interface
 | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx}
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-IPv4
+| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv4