diff options
author | 2017-03-30 07:42:40 +0200 | |
---|---|---|
committer | 2017-03-30 09:37:46 +0200 | |
commit | 974897e8bcff8f3baeadf09b87840f530d8f41c1 (patch) | |
tree | a53d9e15fca8c19783d89b7f0767356bad377e27 /tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot | |
parent | 81fc408c0dfcce0e093733810d80598abf25866a (diff) |
Fix: Naming of perf suites following conventions
Change-Id: I39c3b6b1555a165f2103068a5296d92e0210f221
Signed-off-by: pmikus <pmikus@cisco.com>
Diffstat (limited to 'tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot')
-rw-r--r-- | tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot | 534 |
1 files changed, 0 insertions, 534 deletions
diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot deleted file mode 100644 index 02cc4d71db..0000000000 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot +++ /dev/null @@ -1,534 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance.robot -| Library | resources.libraries.python.Policer -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} -| ... | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} -| ... | WITH NAME | dut2_v4 -| ... -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q -| ... -| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | 3-node Performance Suite Teardown -| ... -| Test Setup | Performance test setup -| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} -| ... | 3-node-IPv4 -| ... -| Documentation | *RFC2544: Pkt throughput IPv4 policer test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries and policer with 2R3C -| ... | color-aware configuration. Policer is applied on links TG - DUT1 and -| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | generated payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. - -*** Variables *** -# X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -| ${cir}= | ${100} -| ${eir}= | ${150} - -*** Test Cases *** -| tc01-64B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps. -| | [Tags] | 1T1C | STHREAD | NDRDISC -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc02-64B-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps, LT=0.5%. -| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc03-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps. -| | [Tags] | 1T1C | STHREAD | NDRDISC -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc04-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps, LT=0.5%. -| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc05-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps. -| | [Tags] | 1T1C | STHREAD | NDRDISC -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc06-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \ -| | ... | LT=0.5%. -| | [Tags] | 1T1C | STHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc07-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps. -| | [Tags] | 2T2C | MTHREAD | NDRDISC -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc08-64B-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps, LT=0.5%. -| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc09-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps. -| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc10-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps, LT=0.5%. -| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc11-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps. -| | [Tags] | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc12-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \ -| | ... | LT=0.5%. -| | [Tags] | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc13-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 100kpps. -| | [Tags] | 4T4C | MTHREAD | NDRDISC -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc14-64B-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps, LT=0.5%. -| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc15-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps. -| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc16-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps, LT=0.5%. -| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} - -| tc17-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps. -| | [Tags] | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| tc18-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-pdrdisc -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \ -| | ... | LT=0.5%. -| | [Tags] | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${perf_pdr_loss_acceptance} -| | ... | ${perf_pdr_loss_acceptance_type} |