CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 0 insertions, 274 deletions

diff --git a/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot b/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot
deleted file mode 100644
index 033414fa06..0000000000
--- a/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-ndrpdrdisc.robot
+++ /dev/null
@@ -1,274 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance_setup.robot
-| ...
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
-| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE
-| ...
-| Suite Setup | Set up 3-node performance topology with DUT's NIC model
-| ... | L2 | Intel-X710
-| Suite Teardown | Tear down 3-node performance topology
-| ...
-| Test Setup | Set up performance test
-| ...
-| Test Teardown | Tear down performance discovery test | ${min_rate}pps
-| ... | ${framesize} | ${traffic_profile}
-| ...
-| Documentation | *RFC2544: Pkt throughput L2BD test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC
-| ... | X710 by Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using either binary search or linear search\
-| ... | algorithms with configured starting rate and final step that determines\
-| ... | throughput measurement resolution. Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-# X710 bandwidth limit
-| ${s_limit} | ${10000000000}
-# Traffic profile:
-| ${traffic_profile} | trex-sl-3n-ethip4-ip4src254
-
-*** Keywords ***
-| L2 Bridge Domain NDR Binary Search
-| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq}
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | Add PCI devices to DUTs in 3-node single link topology
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs
-| | Apply startup configuration on all VPP DUTs
-| | Initialize L2 bridge domain in 3-node circular topology
-| | Find NDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-
-| L2 Bridge Domain PDR Binary Search
-| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq}
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | Add '${wt}' worker threads and '${rxq}' rxqueues in 3-node single-link circular topology
-| | Add PCI devices to DUTs in 3-node single link topology
-| | ${get_framesize}= | Get Frame Size | ${framesize}
-| | Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs
-| | Apply startup configuration on all VPP DUTs
-| | Initialize L2 bridge domain in 3-node circular topology
-| | Find PDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}
-
-*** Test Cases ***
-| tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1
-| | [Tags] | 64B | 1T1C | STHREAD | NDRDISC
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc02-64B-1t1c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${64} | min_rate=${100000} | wt=1 | rxq=1
-| | [Tags] | 64B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| tc03-1518B-1t1c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1
-| | [Tags] | 1518B | 1T1C | STHREAD | NDRDISC
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc04-1518B-1t1c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${1518} | min_rate=${10000} | wt=1 | rxq=1
-| | [Tags] | 1518B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| tc05-9000B-1t1c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1
-| | [Tags] | 9000B | 1T1C | STHREAD | NDRDISC
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc06-9000B-1t1c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${9000} | min_rate=${10000} | wt=1 | rxq=1
-| | [Tags] | 9000B | 1T1C | STHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| tc07-64B-2t2c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1
-| | [Tags] | 64B | 2T2C | MTHREAD | NDRDISC
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc08-64B-2t2c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${64} | min_rate=${100000} | wt=2 | rxq=1
-| | [Tags] | 64B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| tc09-1518B-2t2c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1
-| | [Tags] | 1518B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc10-1518B-2t2c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${1518} | min_rate=${10000} | wt=2 | rxq=1
-| | [Tags] | 1518B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| tc11-9000B-2t2c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1
-| | [Tags] | 9000B | 2T2C | MTHREAD | NDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc12-9000B-2t2c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${9000} | min_rate=${10000} | wt=2 | rxq=1
-| | [Tags] | 9000B | 2T2C | MTHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port.
-| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| tc13-64B-4t4c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${64} | min_rate=${100000} | wt=4 | rxq=2
-| | [Tags] | 64B | 4T4C | MTHREAD | NDRDISC
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Find NDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc14-64B-4t4c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${64} | min_rate=${100000} | wt=4 | rxq=2
-| | [Tags] | 64B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Find PDR for 64 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 100kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| tc15-1518B-4t4c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${1518} | min_rate=${10000} | wt=4 | rxq=2
-| | [Tags] | 1518B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Find NDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc16-1518B-4t4c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${1518} | min_rate=${10000} | wt=4 | rxq=2
-| | [Tags] | 1518B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Find PDR for 1518 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| tc17-9000B-4t4c-eth-l2bdbasemaclrn-ndrdisc
-| | ... | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2
-| | [Tags] | 9000B | 4T4C | MTHREAD | NDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Find NDR for 9000 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps.
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| tc18-9000B-4t4c-eth-l2bdbasemaclrn-pdrdisc
-| | ... | framesize=${9000} | min_rate=${10000} | wt=4 | rxq=2
-| | [Tags] | 9000B | 4T4C | MTHREAD | PDRDISC | SKIP_PATCH
-| | [Documentation]
-| | ... | [Cfg] DUT runs L2BD switching config with with\
-| | ... | 4 threads, 4 phy cores, 2 receive queues per NIC port.
-| | ... | [Ver] Find PDR for 9000 Byte frames using binary search start at 10GE\
-| | ... | linerate, step 10kpps, LT=0.5%.
-| | [Template] | L2 Bridge Domain PDR Binary Search