CSIT-403 Data-Driven Performance Test Suite II

- L2BD XL710

Change-Id: Ie8c0f0db6d8e10da194da9b0b8cc61388d50604c
Signed-off-by: pmikus <pmikus@cisco.com>

1 files changed, 0 insertions, 196 deletions

diff --git a/tests/perf/Long_Bridge_Domain_Intel-X710-DA2.robot b/tests/perf/Long_Bridge_Domain_Intel-X710-DA2.robot
deleted file mode 100644
index 70a5d85178..0000000000
--- a/tests/perf/Long_Bridge_Domain_Intel-X710-DA2.robot
+++ /dev/null
@@ -1,196 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/performance.robot
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG
-| ... | NIC_Intel-X710
-| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
-| ... | L2 | Intel-X710
-| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords
-| ...           | Run Keyword If Test Failed
-| ...           | Traffic should pass with no loss | 10
-| ...           | ${min_rate}pps | ${framesize} | 3-node-bridge
-| ...           | fail_on_loss=${False}
-| ...           | AND | Remove startup configuration of VPP from all DUTs
-| ...           | AND | Show vpp trace dump on all DUTs
-| Documentation | *RFC2544: Pkt throughput L2BD test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge-\
-| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC
-| ... | X710 by Intel.
-| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
-| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
-| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
-| ... | of packets transmitted. NDR and PDR are discovered for different\
-| ... | Ethernet L2 frame sizes using either binary search or linear search\
-| ... | algorithms with configured starting rate and final step that determines\
-| ... | throughput measurement resolution. Test packets are generated by TG on\
-| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
-| ... | (flow-group per direction, 253 flows per flow-group) with all packets\
-| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static\
-| ... | payload. MAC addresses are matching MAC addresses of the TG node\
-| ... | interfaces.
-| ... | *[Ref] Applicable standard specifications:* RFC2544.
-
-*** Variables ***
-#X710 bandwidth limit
-| ${s_limit} | ${10000000000}
-
-*** Keywords ***
-| L2 Bridge Domain NDR Binary Search
-| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq}
-| | # Test Variables required for test teardown
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | Set Test Documentation | [Cfg] DUT runs L2BD switching config with ${wt}\
-| | Set Test Documentation | thread, ${wt} phy core, ${rxq}\ | append=True
-| | Set Test Documentation | receive queue per NIC port. | append=True
-| | Set Test Documentation | [Ver] Find NDR for ${framesize} Byte\ | append=True
-| | Set Test Documentation | frames using binary search start at\ | append=True
-| | Set Test Documentation | 10GE linerate, step ${threshold}pps. | append=True
-| | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo
-| | Add PCI devices to DUTs from 3-node single link topology
-| | Run Keyword If | ${framesize} < ${1522} | Add No Multi Seg to all DUTs
-| | Apply startup configuration on all VPP DUTs
-| | L2 bridge domain initialized in a 3-node circular topology
-| | Find NDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-
-| L2 Bridge Domain PDR Binary Search
-| | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq}
-| | # Test Variables required for test teardown
-| | Set Test Variable | ${framesize}
-| | Set Test Variable | ${min_rate}
-| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
-| | ${binary_min}= | Set Variable | ${min_rate}
-| | ${binary_max}= | Set Variable | ${max_rate}
-| | ${threshold}= | Set Variable | ${min_rate}
-| | Set Test Documentation | [Cfg] DUT runs L2BD switching config with ${wt}\
-| | Set Test Documentation | thread, ${wt} phy core, ${rxq}\ | append=True
-| | Set Test Documentation | receive queue per NIC port. | append=True
-| | Set Test Documentation | [Ver] Find PDR for ${framesize} Byte\ | append=True
-| | Set Test Documentation | frames using binary search start at\ | append=True
-| | Set Test Documentation | 10GE linerate, step ${threshold}pps, | append=True
-| | Set Test Documentation | LT=${glob_loss_acceptance} | append=True
-| | Set Test Documentation | ${glob_loss_acceptance_type}. | append=True
-| | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo
-| | Add PCI devices to DUTs from 3-node single link topology
-| | Run Keyword If | ${framesize} < ${1522} | Add No Multi Seg to all DUTs
-| | Apply startup configuration on all VPP DUTs
-| | L2 bridge domain initialized in a 3-node circular topology
-| | Find PDR using binary search and pps
-| | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge
-| | ... | ${min_rate} | ${max_rate} | ${threshold}
-| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type}
-
-*** Test Cases ***
-| TC01: 64B NDR binary search - DUT L2BD - 1thread 1core 1rxq
-| | ... | ${64} | ${100000} | 1 | 1
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC02: 64B PDR binary search - DUT L2BD - 1thread 1core 1rxq
-| | ... | ${64} | ${100000} | 1 | 1
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| TC03: 1518B NDR binary search - DUT L2BD - 1thread 1core 1rxq
-| | ... | ${1518} | ${10000} | 1 | 1
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC04: 1518B PDR binary search - DUT L2BD - 1thread 1core 1rxq
-| | ... | ${1518} | ${10000} | 1 | 1
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| TC05: 9000B NDR binary search - DUT L2BD - 1thread 1core 1rxq
-| | ... | ${9000} | ${10000} | 1 | 1
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC06: 9000B PDR binary search - DUT L2BD - 1thread 1core 1rxq
-| | ... | ${9000} | ${10000} | 1 | 1
-| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| TC07: 64B NDR binary search - DUT L2BD - 2thread 2core 1rxq
-| | ... | ${64} | ${100000} | 2 | 1
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC08: 64B PDR binary search - DUT L2BD - 2thread 2core 1rxq
-| | ... | ${64} | ${100000} | 2 | 1
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| TC09: 1518B NDR binary search - DUT L2BD - 2thread 2core 1rxq
-| | ... | ${1518} | ${10000} | 2 | 1
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC10: 1518B PDR binary search - DUT L2BD - 2thread 2core 1rxq
-| | ... | ${1518} | ${10000} | 2 | 1
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| TC11: 9000B NDR binary search - DUT L2BD - 2thread 2core 1rxq
-| | ... | ${9000} | ${10000} | 2 | 1
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC12: 9000B PDR binary search - DUT L2BD - 2thread 2core 1rxq
-| | ... | ${9000} | ${10000} | 2 | 1
-| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| TC13: 64B NDR binary search - DUT L2BD - 4thread 4core 2rxq
-| | ... | ${64} | ${100000} | 4 | 2
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC14: 64B PDR binary search - DUT L2BD - 4thread 4core 2rxq
-| | ... | ${64} | ${100000} | 4 | 2
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| TC15: 1518B NDR binary search - DUT L2BD - 4thread 4core 2rxq
-| | ... | ${1518} | ${10000} | 4 | 2
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC16: 1518B PDR binary search - DUT L2BD - 4thread 4core 2rxq
-| | ... | ${1518} | ${10000} | 4 | 2
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search
-
-| TC17: 9000B NDR binary search - DUT L2BD - 4thread 4core 2rxq
-| | ... | ${9000} | ${10000} | 4 | 2
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain NDR Binary Search
-
-| TC18: 9000B PDR binary search - DUT L2BD - 4thread 4core 2rxq
-| | ... | ${9000} | ${10000} | 4 | 2
-| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH
-| | [Template] | L2 Bridge Domain PDR Binary Search