diff options
author | 2016-11-16 16:45:05 +0100 | |
---|---|---|
committer | 2017-01-10 11:42:01 +0000 | |
commit | e3ed9257cd7ef50b44eca72ef7d9ae6c7c792647 (patch) | |
tree | b5234556896a1860c172c2792a55c7d402daa36a /tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot | |
parent | 2671e2616aab7a0bfec7a3501d53ccd72e12d668 (diff) |
CSIT-469 Rename performance suites
Rename performance suites and add more TAGS
Change-Id: I6a5251bb6e380fe2a47a6ec1c1aeb4a9f70c5ce3
Signed-off-by: pmikus <pmikus@cisco.com>
Diffstat (limited to 'tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot')
-rw-r--r-- | tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot | 533 |
1 files changed, 0 insertions, 533 deletions
diff --git a/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot b/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot deleted file mode 100644 index d691bf9292..0000000000 --- a/tests/perf/Long_IPv4_Policer_Intel-X520-DA2.robot +++ /dev/null @@ -1,533 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance.robot -| Library | resources.libraries.python.Policer -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG -| ... | NIC_Intel-X520-DA2 -| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs -| Documentation | *RFC2544: Pkt throughput IPv4 policer test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing and two static IPv4 /24 route entries and policer with 2R3C -| ... | color-aware configuration. Policer is applied on links TG - DUT1 and -| ... | DUT2 - TG. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop -| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop -| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage -| ... | of packets transmitted. NDR and PDR are discovered for different -| ... | Ethernet L2 frame sizes using either binary search or linear search -| ... | algorithms with configured starting rate and final step that determines -| ... | throughput measurement resolution. Test packets are generated by TG on -| ... | links to DUTs. TG traffic profile contains two L3 flow-groups -| ... | (flow-group per direction, 253 flows per flow-group) with all packets -| ... | containing Ethernet header, IPv4 header with IP protocol=61 and -| ... | generated payload. MAC addresses are matching MAC addresses of the TG -| ... | node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. - -*** Variables *** -#X520-DA2 bandwidth limit -| ${s_limit} | ${10000000000} -| ${cir}= | ${100} -| ${eir}= | ${150} - -*** Test Cases *** -| TC01: 64B NDR binary search - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC02: 64B PDR binary search - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps, LT=0.5%. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} - -| TC03: 1518B NDR binary search - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC04: 1518B PDR binary search - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps, LT=0.5%. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} - -| TC05: 9000B NDR binary search - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC06: 9000B PDR binary search - DUT IPv4 2r3c-ca policer - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 1 thread, 1 \ -| | ... | phy core, 1 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \ -| | ... | LT=0.5%. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} - -| TC07: 64B NDR binary search - DUT IPv4 2r3c-ca policer - 2threads 2cores 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC08: 64B PDR binary search - DUT IPv4 2r3c-ca policer - 2threads 2cores 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps, LT=0.5%. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} - -| TC09: 1518B NDR binary search - DUT IPv4 2r3c-ca policer - 2threads 2cores 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC10: 1518B PDR binary search - DUT IPv4 2r3c-ca policer - 2threads 2cores 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps, LT=0.5%. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} - -| TC11: 9000B NDR binary search - DUT IPv4 2r3c-ca policer - 2threads 2cores 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC12: 9000B PDR binary search - DUT IPv4 2r3c-ca policer - 2threads 2cores 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 2 threads, 2 \ -| | ... | phy cores, 1 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \ -| | ... | LT=0.5%. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} - -| TC13: 64B NDR binary search - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 100kpps. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC14: 64B PDR binary search - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 64 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 100kpps, LT=0.5%. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${64} -| | ${min_rate}= | Set Variable | ${100000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} - -| TC15: 1518B NDR binary search - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 10kpps. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC16: 1518B PDR binary search - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 1518 \ -| | ... | Byte frames using binary search start at 10GE linerate, step \ -| | ... | 10kpps, LT=0.5%. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${1518} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} - -| TC17: 9000B NDR binary search - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find NDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} - -| TC18: 9000B PDR binary search - DUT IPv4 2r3c-ca policer - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and policer config with 4 threads, 4 \ -| | ... | phy cores, 2 receive queue per NIC port. [Ver] Find PDR for 9000 \ -| | ... | Byte frames using binary search start at 10GE linerate, step 5kpps, \ -| | ... | LT=0.5%. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | SKIP_PATCH -| | ${framesize}= | Set Variable | ${9000} -| | ${min_rate}= | Set Variable | ${10000} -| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} -| | ${binary_min}= | Set Variable | ${min_rate} -| | ${binary_max}= | Set Variable | ${max_rate} -| | ${threshold}= | Set Variable | ${min_rate} -| | Set Test Variable | ${cb} | ${framesize} -| | Set Test Variable | ${eb} | ${framesize} -| | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} -| | ... | ${binary_max} | 3-node-IPv4 -| | ... | ${min_rate} | ${max_rate} -| | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} |