aboutsummaryrefslogtreecommitdiffstats
path: root/tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot
diff options
context:
space:
mode:
authorpmikus <pmikus@cisco.com>2016-07-19 07:37:56 +0100
committerMiroslav Miklus <mmiklus@cisco.com>2016-08-03 13:10:44 +0000
commit635c30479fe7e7604f59c9f564c1b7f2698bb468 (patch)
tree010fa48f811c5bf6b47697cc39417a125dd00ef7 /tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot
parent8a33e14f1bc9492ac53dda85e9f92b426b27a9bf (diff)
CSIT-213 IPv6 iACL - performance
- create topology with Classify iACL white-list applied on interfaces using IPv6 in 3-node topology - create ipv6_iacl test cases (78B, 1518B, 9000B) Change-Id: Idae635e6a45b52086515fea33a38112209975e8a Signed-off-by: pmikus <pmikus@cisco.com>
Diffstat (limited to 'tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot')
-rw-r--r--tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot204
1 files changed, 204 insertions, 0 deletions
diff --git a/tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot b/tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot
new file mode 100644
index 0000000000..fa9ea4e82d
--- /dev/null
+++ b/tests/perf/Short_IPv6_iAcl_Intel-X520-DA2.robot
@@ -0,0 +1,204 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance.robot
+| Library | resources.libraries.python.Classify.Classify
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT
+| ... | NIC_Intel-X520-DA2
+| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | 3-node Performance Suite Teardown
+| Test Setup | Setup all DUTs before test
+| Test Teardown | Run Keywords
+| ... | Remove startup configuration of VPP from all DUTs
+| ... | AND | Show vpp trace dump on all DUTs
+| Documentation | *Reference NDR throughput IPv6 whitelist verify test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6
+| ... | routing, two static IPv6 /64 routes and IPv6 iAcl security whitelist
+| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG.
+| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel.
+| ... | *[Ver] TG verification:* In short performance tests, TG verifies
+| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet
+| ... | loss tolerance. Ref-NDR value is periodically updated acording to
+| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long
+| ... | performance tests for the same DUT confiiguration. Test packets are
+| ... | generated by TG on links to DUTs. TG traffic profile contains two L3
+| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with
+| ... | all packets containing Ethernet header, IPv6 header and generated
+| ... | payload.
+| ... | *[Ref] Applicable standard specifications:* RFC2544.
+
+*** Test Cases ***
+| TC01: Verify 78B ref-NDR at 2x 2.9Mpps - DUT IPv6 iAcl whitelist - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 78 Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 2.9mpps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC02: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 iAcl whitelist - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC03: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv6 iAcl whitelist - 1thread 1core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
+| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC04: Verify 78B ref-NDR at 2x 5.4Mpps - DUT IPv6 iAcl whitelist - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 78 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 5.4mpps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC05: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 iAcl whitelist - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC06: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv6 iAcl whitelist - 2thread 2core 1rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
+| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC07: Verify 78B ref-NDR at 2x 9.5Mpps - DUT IPv6 iAcl whitelist - 4threads 4cores 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 78 Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 9.5mpps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC08: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv6 iAcl whitelist - 4threads 4cores 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 1518 Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| TC09: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv6 iAcl whitelist - 4threads 4cores 2rxq
+| | [Documentation]
+| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \
+| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify
+| | ... | ref-NDR for 9000 Byte frames using single trial throughput test.
+| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs
+| | And Add PCI devices to DUTs from 3-node single link topology
+| | And Apply startup configuration on all VPP DUTs
+| | And IPv6 forwarding initialized in a 3-node circular topology
+| | And IPv6 iAcl whitelist initialized in a 3-node circular topology
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6