diff options
author | Tibor Frank <tifrank@cisco.com> | 2017-02-22 09:06:27 +0100 |
---|---|---|
committer | Tibor Frank <tifrank@cisco.com> | 2017-03-08 15:43:11 +0100 |
commit | fe29ca4b7e6c412c69f1c56404513a33236aa617 (patch) | |
tree | cedea250eb5dbc2ce52db6bb87eeddfe31792862 /tests/perf | |
parent | 77ab7e4cc80e237331bfd7938974c74393294933 (diff) |
CSIT-530: Add common setup and teardown to perf tests
Change-Id: I2e76de710b4b758eac1d24d447a9c5938f937385
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Diffstat (limited to 'tests/perf')
61 files changed, 2691 insertions, 2828 deletions
diff --git a/tests/perf/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot b/tests/perf/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot index cdc07dd71e..8d05d16c7d 100644 --- a/tests/perf/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot +++ b/tests/perf/10ge2p1vic1227-eth-l2bdbasemaclrn-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,19 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Cisco-VIC-1227 | ETH | L2BDMACLRN | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Cisco-VIC-1227 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-bridge +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -92,8 +91,8 @@ | | Set Test Documentation | [Ver] Find PDR for ${framesize} Byte\ | append=True | | Set Test Documentation | frames using binary search start at\ | append=True | | Set Test Documentation | 10GE linerate, step ${threshold}pps, | append=True -| | Set Test Documentation | LT=${glob_loss_acceptance} | append=True -| | Set Test Documentation | ${glob_loss_acceptance_type}. | append=True +| | Set Test Documentation | LT=${perf_pdr_loss_acceptance} | append=True +| | Set Test Documentation | ${perf_pdr_loss_acceptance_type}. | append=True | | Add '${wt}' worker threads and rxqueues '${rxq}' in 3-node single-link topo | | Add PCI devices to DUTs from 3-node single link topology | | Run Keyword If | ${framesize} < ${1522} | Add No Multi Seg to all DUTs @@ -102,7 +101,7 @@ | | Find PDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc diff --git a/tests/perf/10ge2p1x520-dot1ad-l2xcbase-ndrchk.robot b/tests/perf/10ge2p1x520-dot1ad-l2xcbase-ndrchk.robot index 9430aea565..7254466a10 100644 --- a/tests/perf/10ge2p1x520-dot1ad-l2xcbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-dot1ad-l2xcbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,14 +14,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/tagging.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD +| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput L2XC with 802.1ad verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -58,13 +61,12 @@ | | ... | frames using single trial throughput test at 2x 2.9mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.9mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -74,8 +76,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc02-1514B-1t1c-dot1ad-l2xcbase-ndrchk | | [Documentation] @@ -84,13 +86,12 @@ | | ... | frames using single trial throughput test at 2x 810635pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1514 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 810635pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -100,8 +101,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc03-9000B-1t1c-dot1ad-l2xcbase-ndrchk | | [Documentation] @@ -110,12 +111,11 @@ | | ... | frames using single trial throughput test at 2x 138458pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138458pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -125,8 +125,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc04-64B-2t2c-dot1ad-l2xcbase-ndrchk | | [Documentation] @@ -135,13 +135,12 @@ | | ... | frames using single trial throughput test at 2x 7.0mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.0mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -151,8 +150,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc05-1514B-2t2c-dot1ad-l2xcbase-ndrchk | | [Documentation] @@ -161,13 +160,12 @@ | | ... | frames using single trial throughput test at 2x 810635pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1514 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 810635pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -177,8 +175,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc06-9000B-2t2c-dot1ad-l2xcbase-ndrchk | | [Documentation] @@ -187,12 +185,11 @@ | | ... | frames using single trial throughput test at 2x 138458pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138458pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -202,8 +199,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc07-64B-4t4c-dot1ad-l2xcbase-ndrchk | | [Documentation] @@ -212,13 +209,12 @@ | | ... | frames using single trial throughput test at 2x 8.0mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 8.0mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -228,8 +224,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc08-1514B-4t4c-dot1ad-l2xcbase-ndrchk | | [Documentation] @@ -238,13 +234,12 @@ | | ... | frames using single trial throughput test at 2x 810635pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1514 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 810635pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -254,8 +249,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc09-9000B-4t4c-dot1ad-l2xcbase-ndrchk | | [Documentation] @@ -264,12 +259,11 @@ | | ... | frames using single trial throughput test at 2x 138458pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138458pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | ... | ${outer_vlan_id} | ${inner_vlan_id} | ${type_subif} @@ -279,5 +273,5 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect diff --git a/tests/perf/10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot b/tests/perf/10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot index e4f2fb1e3c..33f299a917 100644 --- a/tests/perf/10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-dot1ad-l2xcbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,19 +14,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/tagging.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD +| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1AD +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-xconnect +| ... | Documentation | *RFC2544: Pkt throughput L2XC with 802.1ad test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -56,7 +55,7 @@ | ${inner_vlan_id}= | 200 | ${type_subif}= | two_tags | ${tag_rewrite}= | pop-2 -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -121,8 +120,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1514B-1t1c-dot1ad-l2xcbase-ndrdisc | | [Documentation] @@ -185,8 +184,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-dot1ad-l2xcbase-ndrdisc | | [Documentation] @@ -247,8 +246,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-dot1ad-l2xcbase-ndrdisc | | [Documentation] @@ -311,8 +310,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1514B-2t2c-dot1ad-l2xcbase-ndrdisc | | [Documentation] @@ -375,8 +374,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-dot1ad-l2xcbase-ndrdisc | | [Documentation] @@ -437,8 +436,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-dot1ad-l2xcbase-ndrdisc | | [Documentation] @@ -501,8 +500,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1514B-4t4c-dot1ad-l2xcbase-ndrdisc | | [Documentation] @@ -565,8 +564,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-dot1ad-l2xcbase-ndrdisc | | [Documentation] @@ -627,5 +626,5 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot index 028c9e00f9..1e78f1dc53 100644 --- a/tests/perf/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot @@ -14,23 +14,20 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.QemuUtils +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | DOT1Q | L2BDMACLRN | BASE | VHOST | VM +| ... | NIC_Intel-X520-DA2 | DOT1Q | L2BDMACLRN | BASE | VHOST | VM +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Show Vpp Vhost On All DUTs -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1} -| ... | ${dut1_vm_refs} -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2} -| ... | ${dut2_vm_refs} +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-bridge +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -141,7 +138,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -211,7 +209,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-IMIX-1t1c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -285,7 +284,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -355,7 +355,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -425,7 +426,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-IMIX-2t2c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -499,7 +501,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -569,7 +572,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -639,7 +643,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-IMIX-4t4c-dot1q-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -713,4 +718,5 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-dot1q-l2xcbase-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x520-dot1q-l2xcbase-eth-2vhost-1vm-ndrdisc.robot index 46bbc3be41..575bda7b59 100644 --- a/tests/perf/10ge2p1x520-dot1q-l2xcbase-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-dot1q-l2xcbase-eth-2vhost-1vm-ndrdisc.robot @@ -14,23 +14,20 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.NodePath +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | DOT1Q | L2XCFWD | BASE | VHOST | VM +| ... | NIC_Intel-X520-DA2 | DOT1Q | L2XCFWD | BASE | VHOST | VM +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Show Vpp Vhost On All DUTs -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1} -| ... | ${dut1_vm_refs} -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2} -| ... | ${dut2_vm_refs} +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... | Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -135,7 +132,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -203,7 +201,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -275,7 +274,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -343,7 +343,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -411,7 +412,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -483,7 +485,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -551,7 +554,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -619,7 +623,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -691,4 +696,5 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrchk.robot b/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrchk.robot index 9d7f9e3fb1..d033886961 100644 --- a/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,14 +14,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/tagging.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q +| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput L2XC with 802.1q verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -54,13 +57,12 @@ | | ... | frames using single trial throughput test at 2x 2.9mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.9mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -69,8 +71,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc02-1518B-1t1c-dot1q-l2xcbase-ndrchk | | [Documentation] @@ -79,13 +81,12 @@ | | ... | frames using single trial throughput test at 2x 720000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -94,8 +95,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc03-9000B-1t1c-dot1q-l2xcbase-ndrchk | | [Documentation] @@ -104,12 +105,11 @@ | | ... | frames using single trial throughput test at 2x 120000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -118,8 +118,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc04-64B-2t2c-dot1q-l2xcbase-ndrchk | | [Documentation] @@ -128,13 +128,12 @@ | | ... | frames using single trial throughput test at 2x 7.0mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.0mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -143,8 +142,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc05-1518B-2t2c-dot1q-l2xcbase-ndrchk | | [Documentation] @@ -153,13 +152,12 @@ | | ... | frames using single trial throughput test at 2x 720000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -168,8 +166,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc06-9000B-2t2c-dot1q-l2xcbase-ndrchk | | [Documentation] @@ -178,12 +176,11 @@ | | ... | frames using single trial throughput test at 2x 120000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -192,8 +189,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc07-64B-4t4c-dot1q-l2xcbase-ndrchk | | [Documentation] @@ -202,13 +199,12 @@ | | ... | frames using single trial throughput test at 2x 11.0mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 11.0mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -217,8 +213,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc08-1518B-4t4c-dot1q-l2xcbase-ndrchk | | [Documentation] @@ -227,13 +223,12 @@ | | ... | frames using single trial throughput test at 2x 720000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -242,8 +237,8 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc09-9000B-4t4c-dot1q-l2xcbase-ndrchk | | [Documentation] @@ -252,12 +247,11 @@ | | ... | frames using single trial throughput test at 2x 120000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And VPP interfaces in path are up in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And VPP interfaces in path are up in a 3-node circular topology | | When VLAN dot1q subinterfaces initialized on 3-node topology | | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} | | And L2 tag rewrite method setup on interfaces @@ -266,5 +260,5 @@ | | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect | | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} | | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect diff --git a/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot b/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot index 950e351aa0..74d8bd886b 100644 --- a/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-dot1q-l2xcbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,19 +14,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/tagging.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q +| ... | NIC_Intel-X520-DA2 | L2XCFWD | BASE | DOT1Q | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-xconnect +| ... | Documentation | *RFC2544: Pkt throughput L2XC with 802.1q test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,7 +51,7 @@ *** Variables *** | ${subid}= | 10 | ${tag_rewrite}= | pop-1 -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -115,8 +114,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-dot1q-l2xcbase-ndrdisc | | [Documentation] @@ -177,8 +176,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-dot1q-l2xcbase-ndrdisc | | [Documentation] @@ -237,8 +236,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-dot1q-l2xcbase-ndrdisc | | [Documentation] @@ -299,8 +298,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-dot1q-l2xcbase-ndrdisc | | [Documentation] @@ -361,8 +360,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-dot1q-l2xcbase-ndrdisc | | [Documentation] @@ -421,8 +420,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-dot1q-l2xcbase-ndrdisc | | [Documentation] @@ -483,8 +482,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-dot1q-l2xcbase-ndrdisc | | [Documentation] @@ -545,8 +544,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-dot1q-l2xcbase-ndrdisc | | [Documentation] @@ -605,5 +604,5 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot index 3a69864ce0..bfeca461f5 100644 --- a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,23 +14,20 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.QemuUtils +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Show Vpp Vhost On All DUTs -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1} -| ... | ${dut1_vm_refs} -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2} -| ... | ${dut2_vm_refs} +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-bridge +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -59,9 +56,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} -#Socket names +# Socket names | ${bd_id1}= | 1 | ${bd_id2}= | 2 | ${sock1}= | /tmp/sock-1-${bd_id1} @@ -131,8 +128,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -197,8 +194,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -264,8 +261,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -330,8 +327,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -396,8 +393,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -464,8 +461,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -530,8 +527,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -596,8 +593,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -664,5 +661,5 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-ndrchk.robot b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-ndrchk.robot index e8aa347cd7..d21cf2b431 100644 --- a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-ndrchk.robot +++ b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,14 +14,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.NodePath +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE +| ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput L2BD verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,15 +53,14 @@ | | ... | frames using single trial throughput test at 2x 3.2mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.2mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge | tc02-1518B-1t1c-eth-l2bdbasemaclrn-ndrchk | | [Documentation] @@ -67,15 +69,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge | tc03-9000B-1t1c-eth-l2bdbasemaclrn-ndrchk | | [Documentation] @@ -84,14 +85,13 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge | tc04-64B-2t2c-eth-l2bdbasemaclrn-ndrchk | | [Documentation] @@ -100,15 +100,14 @@ | | ... | frames using single trial throughput test at 2x 6.9mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 6.9mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge | tc05-1518B-2t2c-eth-l2bdbasemaclrn-ndrchk | | [Documentation] @@ -117,15 +116,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge | tc06-9000B-2t2c-eth-l2bdbasemaclrn-ndrchk | | [Documentation] @@ -134,14 +132,13 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge | tc07-64B-4t4c-eth-l2bdbasemaclrn-ndrchk | | [Documentation] @@ -150,15 +147,14 @@ | | ... | frames using single trial throughput test at 2x 7.4mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.4mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge | tc08-1518B-4t4c-eth-l2bdbasemaclrn-ndrchk | | [Documentation] @@ -167,15 +163,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge | tc09-9000B-4t4c-eth-l2bdbasemaclrn-ndrchk | | [Documentation] @@ -184,11 +179,10 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 bridge domain initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-bridge +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 bridge domain initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-bridge diff --git a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot index 8fdaf17995..dff612f0a9 100644 --- a/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-eth-l2bdbasemaclrn-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,19 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | ETH | L2BDMACLRN | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-bridge +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -49,7 +48,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Keywords *** @@ -88,7 +87,7 @@ | | Find PDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc diff --git a/tests/perf/10ge2p1x520-eth-l2xcbase-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x520-eth-l2xcbase-eth-2vhost-1vm-ndrdisc.robot index 6491e67771..17a339328a 100644 --- a/tests/perf/10ge2p1x520-eth-l2xcbase-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-eth-l2xcbase-eth-2vhost-1vm-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,23 +14,20 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.NodePath +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | VHOST | VM +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE | VHOST | VM +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Show Vpp Vhost On All DUTs -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1} -| ... | ${dut1_vm_refs} -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2} -| ... | ${dut2_vm_refs} +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... | Documentation | *RFC2544: Pkt throughput L2XC test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -62,7 +59,7 @@ | ${bd_id2}= | 2 | ${sock1}= | /tmp/sock-1-${bd_id1} | ${sock2}= | /tmp/sock-1-${bd_id2} -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -129,8 +126,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -195,8 +192,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-IMIX-1t1c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -263,8 +260,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -329,8 +326,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -395,8 +392,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-IMIX-2t2c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -463,8 +460,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -529,8 +526,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -595,8 +592,8 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-IMIX-4t4c-eth-l2xcbase-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -663,6 +660,6 @@ | | ... | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-eth-l2xcbase-ndrchk.robot b/tests/perf/10ge2p1x520-eth-l2xcbase-ndrchk.robot index 4c8c4fd835..49872c845f 100644 --- a/tests/perf/10ge2p1x520-eth-l2xcbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-eth-l2xcbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,14 +15,17 @@ | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.NodePath +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput L2XC verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,15 +53,14 @@ | | ... | frames using single trial throughput test at 2x 3.6mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.6mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc02-1518B-1t1c-eth-l2xcbase-ndrchk | | [Documentation] @@ -67,15 +69,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc03-9000B-1t1c-eth-l2xcbase-ndrchk | | [Documentation] @@ -84,14 +85,13 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc04-64B-2t2c-eth-l2xcbase-ndrchk | | [Documentation] @@ -100,15 +100,14 @@ | | ... | frames using single trial throughput test at 2x 8.3mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 8.3mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc05-1518B-2t2c-eth-l2xcbase-ndrchk | | [Documentation] @@ -117,15 +116,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc06-9000B-2t2c-eth-l2xcbase-ndrchk | | [Documentation] @@ -134,14 +132,13 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc07-64B-4t4c-eth-l2xcbase-ndrchk | | [Documentation] @@ -150,15 +147,14 @@ | | ... | frames using single trial throughput test at 2x 9.3mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 9.3mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc08-1518B-4t4c-eth-l2xcbase-ndrchk | | [Documentation] @@ -167,15 +163,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc09-9000B-4t4c-eth-l2xcbase-ndrchk | | [Documentation] @@ -184,11 +179,10 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect diff --git a/tests/perf/10ge2p1x520-eth-l2xcbase-ndrdisc.robot b/tests/perf/10ge2p1x520-eth-l2xcbase-ndrdisc.robot index 68ff3bd863..475c32db4a 100644 --- a/tests/perf/10ge2p1x520-eth-l2xcbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-eth-l2xcbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,19 +15,18 @@ | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.NodePath +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE +| ... | NIC_Intel-X520-DA2 | ETH | L2XCFWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-xconnect +| ... | Documentation | *RFC2544: Pkt throughput L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -97,8 +96,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -143,8 +142,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -187,8 +186,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -233,8 +232,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -279,8 +278,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -323,8 +322,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -369,8 +368,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -415,8 +414,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -459,8 +458,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc19-IMIX-1t1c-eth-l2xcbase-ndrdisc | | [Documentation] @@ -507,5 +506,5 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot index 3d1d83eeab..a40348a090 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,16 +14,21 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Cop -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv4 whitelist verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -54,21 +59,20 @@ | | ... | at 2x 3.5mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.5mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc02-1518B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk | | [Documentation] @@ -78,21 +82,20 @@ | | ... | at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc03-9000B-1t1c-ethip4-ip4base-copwhtlistbase-ndrchk | | [Documentation] @@ -102,20 +105,19 @@ | | ... | at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc04-64B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk | | [Documentation] @@ -125,21 +127,20 @@ | | ... | at 2x 6.6mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 6.6mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc05-1518B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk | | [Documentation] @@ -149,21 +150,20 @@ | | ... | at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc06-9000B-2t2c-ethip4-ip4base-copwhtlistbase-ndrchk | | [Documentation] @@ -173,20 +173,19 @@ | | ... | at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc07-64B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk | | [Documentation] @@ -196,21 +195,20 @@ | | ... | at 2x 10.0mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10.0mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc08-1518B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk | | [Documentation] @@ -220,21 +218,20 @@ | | ... | at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc09-9000B-4t4c-ethip4-ip4base-copwhtlistbase-ndrchk | | [Documentation] @@ -244,17 +241,16 @@ | | ... | at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local -| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 10.10.10.0 | 24 | 1 | local +| | And Add fib table | ${dut2} | 20.20.20.0 | 24 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip4 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip4 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrdisc.robot index 06c1f50ae3..b6afedc547 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-copwhtlistbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,21 +14,22 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Cop -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | COPWHLIST +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4 +| ... | Documentation | *RFC2544: Pkt throughput IPv4 whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -53,7 +54,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -114,8 +115,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc | | [Documentation] @@ -174,8 +175,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4-ip4base-copwhtlistbase-ndrdisc | | [Documentation] @@ -232,8 +233,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc | | [Documentation] @@ -292,8 +293,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc | | [Documentation] @@ -352,8 +353,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4-ip4base-copwhtlistbase-ndrdisc | | [Documentation] @@ -410,8 +411,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc | | [Documentation] @@ -470,8 +471,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc | | [Documentation] @@ -530,8 +531,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4-ip4base-copwhtlistbase-ndrdisc | | [Documentation] @@ -588,5 +589,5 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-eth-2vhost-1vm-ndrdisc.robot index 4ef191ffe4..b085cfb6c2 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-eth-2vhost-1vm-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,23 +14,20 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.QemuUtils +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | VHOST | VM +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE | VHOST | VM +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Show Vpp Vhost On All DUTs -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1} -| ... | ${dut1_vm_refs} -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2} -| ... | ${dut2_vm_refs} +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... | Documentation | *RFC2544: Pkt throughput IPv4 test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -134,8 +131,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -204,8 +201,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-IMIX-1t1c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -275,8 +272,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -345,8 +342,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -415,8 +412,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-IMIX-2t2c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -487,8 +484,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -557,8 +554,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -627,8 +624,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-IMIX-4t4c-ethip4-ip4base-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -699,5 +696,5 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot index 3aaa770ad3..df0083e3ad 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,16 +14,21 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv4 whitelist verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -54,13 +59,12 @@ | | ... | at 2x 3.1mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.1mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -75,8 +79,8 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc02-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrchk | | [Documentation] @@ -86,13 +90,12 @@ | | ... | at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -107,8 +110,8 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc03-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrchk | | [Documentation] @@ -118,12 +121,11 @@ | | ... | at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -138,8 +140,8 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc04-64B-2t2c-ethip4-ip4base-iacldstbase-ndrchk | | [Documentation] @@ -149,13 +151,12 @@ | | ... | at 2x 5.8mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 5.8mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -170,8 +171,8 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc05-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrchk | | [Documentation] @@ -181,13 +182,12 @@ | | ... | at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -202,8 +202,8 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc06-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrchk | | [Documentation] @@ -213,12 +213,11 @@ | | ... | at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -233,8 +232,8 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc07-64B-4t4c-ethip4-ip4base-iacldstbase-ndrchk | | [Documentation] @@ -244,13 +243,12 @@ | | ... | at 2x 7.8mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.8mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -265,8 +263,8 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc08-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrchk | | [Documentation] @@ -276,13 +274,12 @@ | | ... | at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -297,8 +294,8 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc09-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrchk | | [Documentation] @@ -308,12 +305,11 @@ | | ... | at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology | | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 | | ... | ${dut1} | ip4 | dst | | And Vpp Configures Classify Session L3 @@ -328,5 +324,5 @@ | | ... | ip4 | dst | 10.10.10.2 | | And Vpp Enable Input Acl Interface | | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrdisc.robot index 27a4d3adab..ee33e0761a 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-iacldstbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,21 +14,22 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | IACLDST +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4 +| ... | Documentation | *RFC2544: Pkt throughput IPv4 iAcl whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -53,7 +54,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -130,8 +131,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4-ip4base-iacldstbase-ndrdisc | | [Documentation] @@ -206,8 +207,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4-ip4base-iacldstbase-ndrdisc | | [Documentation] @@ -280,8 +281,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc | | [Documentation] @@ -356,8 +357,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc | | [Documentation] @@ -432,8 +433,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4-ip4base-iacldstbase-ndrdisc | | [Documentation] @@ -506,8 +507,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc | | [Documentation] @@ -582,8 +583,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc | | [Documentation] @@ -658,8 +659,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4-ip4base-iacldstbase-ndrdisc | | [Documentation] @@ -732,5 +733,5 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot index 45d7263aab..2ef238c818 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,16 +14,21 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Policer -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q +| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv4 policer verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -57,18 +62,17 @@ | | ... | Byte frames using single trial throughput test at 2x 3.1mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.1mpps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc02-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk | | [Documentation] @@ -77,18 +81,17 @@ | | ... | Byte frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc03-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrchk | | [Documentation] @@ -97,17 +100,16 @@ | | ... | Byte frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc04-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk | | [Documentation] @@ -116,18 +118,17 @@ | | ... | 64 Byte frames using single trial throughput test at 2x 5.6mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 5.6mpps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc05-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk | | [Documentation] @@ -136,18 +137,17 @@ | | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc06-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrchk | | [Documentation] @@ -156,17 +156,16 @@ | | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc07-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk | | [Documentation] @@ -175,18 +174,17 @@ | | ... | Byte frames using single trial throughput test at 2x 8.9mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 8.9mpps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc08-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk | | [Documentation] @@ -195,18 +193,17 @@ | | ... | 1518 Byte frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc09-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrchk | | [Documentation] @@ -215,14 +212,13 @@ | | ... | 9000 Byte frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Set Test Variable | ${cb} | ${framesize} | | Set Test Variable | ${eb} | ${framesize} | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | And IPv4 policer 2r3c-'ca' initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot index 5ec500eb62..02cc4d71db 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-ipolicemarkbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,21 +14,22 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Policer -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q +| ... | NIC_Intel-X520-DA2 | IP4FWD | BASE | DOT1Q +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4 +| ... | Documentation | *RFC2544: Pkt throughput IPv4 policer test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -53,7 +54,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC2698. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${cir}= | ${100} | ${eir}= | ${150} @@ -110,8 +111,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc | | [Documentation] @@ -163,8 +164,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4-ip4base-ipolicemarkbase-ndrdisc | | [Documentation] @@ -214,8 +215,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc | | [Documentation] @@ -268,8 +269,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc | | [Documentation] @@ -321,8 +322,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4-ip4base-ipolicemarkbase-ndrdisc | | [Documentation] @@ -372,8 +373,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc | | [Documentation] @@ -425,8 +426,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc | | [Documentation] @@ -478,8 +479,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4-ip4base-ipolicemarkbase-ndrdisc | | [Documentation] @@ -529,5 +530,5 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-ndrchk.robot index 1f9f09a40e..f7322da9b8 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -16,16 +16,21 @@ | Library | resources.libraries.python.topology.Topology | Library | resources.libraries.python.NodePath | Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv4 routing verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -54,15 +59,14 @@ | | ... | frames using single trial throughput test at 2x 3.5mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.5mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc02-1518B-1t1c-ethip4-ip4base-ndrchk | | [Documentation] @@ -71,15 +75,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc03-9000B-1t1c-ethip4-ip4base-ndrchk | | [Documentation] @@ -88,14 +91,13 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc04-64B-2t2c-ethip4-ip4base-ndrchk | | [Documentation] @@ -104,15 +106,14 @@ | | ... | frames using single trial throughput test at 2x 7.5mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.5mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc05-1518B-2t2c-ethip4-ip4base-ndrchk | | [Documentation] @@ -121,15 +122,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc06-9000B-2t2c-ethip4-ip4base-ndrchk | | [Documentation] @@ -138,14 +138,13 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc07-64B-4t4c-ethip4-ip4base-ndrchk | | [Documentation] @@ -154,15 +153,14 @@ | | ... | frames using single trial throughput test at 2x 10.0mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10.0mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc08-1518B-4t4c-ethip4-ip4base-ndrchk | | [Documentation] @@ -171,15 +169,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc08-9000B-4t4c-ethip4-ip4base-ndrchk | | [Documentation] @@ -188,11 +185,10 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv4 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 diff --git a/tests/perf/10ge2p1x520-ethip4-ip4base-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4base-ndrdisc.robot index d9eb9305f3..2b009b2777 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4base-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4base-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -16,21 +16,22 @@ | Library | resources.libraries.python.topology.Topology | Library | resources.libraries.python.NodePath | Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4 +| ... | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -54,7 +55,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -101,8 +102,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -147,8 +148,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -191,8 +192,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -237,8 +238,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -283,8 +284,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -327,8 +328,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -373,8 +374,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -419,8 +420,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -463,8 +464,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc19-IMIX-1t1c-ethip4-ip4base-ndrdisc | | [Documentation] @@ -511,5 +512,5 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot index 48cd0d3247..89f7b4454d 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4scale200k-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv4 routing verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,17 +55,15 @@ | | ... | frames using single trial throughput test at 2x 3.5mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.5mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc02-1518B-1t1c-ethip4-ip4scale200k-ndrchk | | [Documentation] @@ -70,17 +72,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc03-9000B-1t1c-ethip4-ip4scale200k-ndrchk | | [Documentation] @@ -89,16 +89,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc04-64B-2t2c-ethip4-ip4scale200k-ndrchk | | [Documentation] @@ -107,17 +105,15 @@ | | ... | frames using single trial throughput test at 2x 7.5mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.5mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc05-1518B-2t2c-ethip4-ip4scale200k-ndrchk | | [Documentation] @@ -126,17 +122,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc06-9000B-2t2c-ethip4-ip4scale200k-ndrchk | | [Documentation] @@ -145,16 +139,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc07-64B-4t4c-ethip4-ip4scale200k-ndrchk | | [Documentation] @@ -163,17 +155,15 @@ | | ... | frames using single trial throughput test at 2x 10.0mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10.0mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc08-1518B-4t4c-ethip4-ip4scale200k-ndrchk | | [Documentation] @@ -182,17 +172,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc09-9000B-4t4c-ethip4-ip4scale200k-ndrchk | | [Documentation] @@ -201,13 +189,11 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4scale200k-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4scale200k-ndrdisc.robot index c27c7e504e..99905e27fb 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4scale200k-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4scale200k-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,18 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_200K +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4-dst-${rts_per_flow} +| ... | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -49,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${rts_per_flow}= | 100000 @@ -101,8 +101,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4-ip4scale200k-ndrdisc | | [Documentation] @@ -151,8 +151,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4-ip4scale200k-ndrdisc | | [Documentation] @@ -199,8 +199,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4-ip4scale200k-ndrdisc | | [Documentation] @@ -249,8 +249,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4-ip4scale200k-ndrdisc | | [Documentation] @@ -299,8 +299,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4-ip4scale200k-ndrdisc | | [Documentation] @@ -347,8 +347,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4-ip4scale200k-ndrdisc | | [Documentation] @@ -397,8 +397,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4-ip4scale200k-ndrdisc | | [Documentation] @@ -447,8 +447,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4-ip4scale200k-ndrdisc | | [Documentation] @@ -495,5 +495,5 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot index 7ed352e890..1a3404685c 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4scale20k-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv4 routing verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,17 +55,15 @@ | | ... | frames using single trial throughput test at 2x 3.5mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.5mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc02-1518B-1t1c-ethip4-ip4scale20k-ndrchk | | [Documentation] @@ -70,17 +72,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc03-9000B-1t1c-ethip4-ip4scale20k-ndrchk | | [Documentation] @@ -89,16 +89,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc04-64B-2t2c-ethip4-ip4scale20k-ndrchk | | [Documentation] @@ -107,17 +105,15 @@ | | ... | frames using single trial throughput test at 2x 7.5mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.5mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc05-1518B-2t2c-ethip4-ip4scale20k-ndrchk | | [Documentation] @@ -126,17 +122,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc06-9000B-2t2c-ethip4-ip4scale20k-ndrchk | | [Documentation] @@ -145,16 +139,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc07-64B-4t4c-ethip4-ip4scale20k-ndrchk | | [Documentation] @@ -163,17 +155,15 @@ | | ... | frames using single trial throughput test at 2x 10.0mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10.0mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc08-1518B-4t4c-ethip4-ip4scale20k-ndrchk | | [Documentation] @@ -182,17 +172,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc09-9000B-4t4c-ethip4-ip4scale20k-ndrchk | | [Documentation] @@ -201,13 +189,11 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4scale20k-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4scale20k-ndrdisc.robot index c6ab2a7eee..1101b1383e 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4scale20k-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4scale20k-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,18 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_20K +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4-dst-${rts_per_flow} +| ... | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -49,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${rts_per_flow}= | ${10000} @@ -101,8 +101,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4-ip4scale20k-ndrdisc | | [Documentation] @@ -151,8 +151,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4-ip4scale20k-ndrdisc | | [Documentation] @@ -199,8 +199,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4-ip4scale20k-ndrdisc | | [Documentation] @@ -249,8 +249,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4-ip4scale20k-ndrdisc | | [Documentation] @@ -299,8 +299,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4-ip4scale20k-ndrdisc | | [Documentation] @@ -347,8 +347,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4-ip4scale20k-ndrdisc | | [Documentation] @@ -397,8 +397,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4-ip4scale20k-ndrdisc | | [Documentation] @@ -447,8 +447,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4-ip4scale20k-ndrdisc | | [Documentation] @@ -495,5 +495,5 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot index ab05841ef7..35ac274f92 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4scale2m-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv4 routing verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,18 +55,16 @@ | | ... | frames using single trial throughput test at 2x 3.5mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.5mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc02-1518B-1t1c-ethip4-ip4scale2m-ndrchk | | [Documentation] @@ -71,18 +73,16 @@ | | ... | receive queue per NIC port at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc03-9000B-1t1c-ethip4-ip4scale2m-ndrchk | | [Documentation] @@ -91,17 +91,15 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc04-64B-2t2c-ethip4-ip4scale2m-ndrchk | | [Documentation] @@ -110,18 +108,16 @@ | | ... | frames using single trial throughput test at 2x 7.5mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.5mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc05-1518B-2t2c-ethip4-ip4scale2m-ndrchk | | [Documentation] @@ -130,18 +126,16 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc06-9000B-2t2c-ethip4-ip4scale2m-ndrchk | | [Documentation] @@ -150,17 +144,15 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc07-64B-4t4c-ethip4-ip4scale2m-ndrchk | | [Documentation] @@ -169,18 +161,16 @@ | | ... | frames using single trial throughput test at 2x 10.0mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10.0mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc08-1518B-4t4c-ethip4-ip4scale2m-ndrchk | | [Documentation] @@ -189,18 +179,16 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} | tc09-9000B-4t4c-ethip4-ip4scale2m-ndrchk | | [Documentation] @@ -209,14 +197,12 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add Heapsize Config to all DUTs | 3G -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv4-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add Heapsize Config to all DUTs | 3G +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv4 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} diff --git a/tests/perf/10ge2p1x520-ethip4-ip4scale2m-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4-ip4scale2m-ndrdisc.robot index dcb440d7b8..da654591e4 100644 --- a/tests/perf/10ge2p1x520-ethip4-ip4scale2m-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4-ip4scale2m-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,18 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M +| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | SCALE | FIB_2M +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4-dst-${rts_per_flow} -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4-dst-${rts_per_flow} +| ... | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -49,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${rts_per_flow}= | ${1000000} @@ -103,8 +103,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4-ip4scale2m-ndrdisc | | [Documentation] @@ -155,8 +155,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4-ip4scale2m-ndrdisc | | [Documentation] @@ -205,8 +205,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4-ip4scale2m-ndrdisc | | [Documentation] @@ -257,8 +257,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4-ip4scale2m-ndrdisc | | [Documentation] @@ -309,8 +309,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4-ip4scale2m-ndrdisc | | [Documentation] @@ -359,8 +359,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4-ip4scale2m-ndrdisc | | [Documentation] @@ -411,8 +411,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4-ip4scale2m-ndrdisc | | [Documentation] @@ -463,8 +463,8 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4-ip4scale2m-ndrdisc | | [Documentation] @@ -513,5 +513,5 @@ | | ... | 3-node-IPv4-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4lispip4-ip4base-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4lispip4-ip4base-ndrchk.robot index 652dbd97ee..85140059c0 100644 --- a/tests/perf/10ge2p1x520-ethip4lispip4-ip4base-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4lispip4-ip4base-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,18 +15,21 @@ | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} -| ... | WITH NAME | dut1_v4 +| ... | WITH NAME | dut1_v4 | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} -| ... | WITH NAME | dut2_v4 -# import additional Lisp settings from resource file +| ... | WITH NAME | dut2_v4 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP4UNRLAY | IP4OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput Lisp tunnel verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -57,22 +60,21 @@ | | ... | test at 2x 1.9mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 1.9mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc02-1480B-1t1c-ethip4lispip4-ip4base-ndrchk | | [Documentation] @@ -82,22 +84,21 @@ | | ... | throughput test at 2x 740000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1480 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 740000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc03-9000B-1t1c-ethip4lispip4-ip4base-ndrchk | | [Documentation] @@ -107,21 +108,20 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc04-64B-2t2c-ethip4lispip4-ip4base-ndrchk | | [Documentation] @@ -131,22 +131,21 @@ | | ... | throughput test at 2x 3.6mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.6mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc05-1480B-2t2c-ethip4lispip4-ip4base-ndrchk | | [Documentation] @@ -156,22 +155,21 @@ | | ... | throughput test at 2x 740000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1480 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 740000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc06-9000B-2t2c-ethip4lispip4-ip4base-ndrchk | | [Documentation] @@ -181,21 +179,20 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc07-64B-4t4c-ethip4lispip4-ip4base-ndrchk | | [Documentation] @@ -205,22 +202,21 @@ | | ... | throughput test at 2x 3.5mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.5mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc08-1480B-4t4c-ethip4lispip4-ip4base-ndrchk | | [Documentation] @@ -230,22 +226,21 @@ | | ... | throughput test at 2x 740000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1480 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 740000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc09-9000B-4t4c-ethip4lispip4-ip4base-ndrchk | | [Documentation] @@ -255,19 +250,18 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} -| | ... | ${dut2_to_tg_ip4} | ${prefix4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} -| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4} | ${dut1_to_tg_ip4} | ${dut2_to_dut1_ip4} +| | ... | ${dut2_to_tg_ip4} | ${prefix4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid} +| | ... | ${dut1_ip4_static_adjacency} | ${dut2_ip4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 diff --git a/tests/perf/10ge2p1x520-ethip4lispip4-ip4base-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4lispip4-ip4base-ndrdisc.robot index 34caa6299c..8c676db2f3 100644 --- a/tests/perf/10ge2p1x520-ethip4lispip4-ip4base-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4lispip4-ip4base-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,23 +15,22 @@ | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} -| ... | WITH NAME | dut1_v4 +| ... | WITH NAME | dut1_v4 | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} -| ... | WITH NAME | dut2_v4 -# import additional Lisp settings from resource file +| ... | WITH NAME | dut2_v4 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP4UNRLAY | IP4OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4 +| ... | Documentation | *RFC6830: Pkt throughput Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -49,7 +48,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -114,8 +113,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1480B-1t1c-ethip4lispip4-ip4base-ndrdisc | | [Documentation] @@ -178,8 +177,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4lispip4-ip4base-ndrdisc | | [Documentation] @@ -240,8 +239,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4lispip4-ip4base-ndrdisc | | [Documentation] @@ -304,8 +303,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1480B-2t2c-ethip4lispip4-ip4base-ndrdisc | | [Documentation] @@ -368,8 +367,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4lispip4-ip4base-ndrdisc | | [Documentation] @@ -430,8 +429,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4lispip4-ip4base-ndrdisc | | [Documentation] @@ -494,8 +493,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1480B-4t4c-ethip4lispip4-ip4base-ndrdisc | | [Documentation] @@ -558,8 +557,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4lispip4-ip4base-ndrdisc | | [Documentation] @@ -620,5 +619,5 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrchk.robot index 27492f31b1..2983a538fe 100644 --- a/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,18 +15,21 @@ | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} -| ... | WITH NAME | dut1_v4 +| ... | WITH NAME | dut1_v4 | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} -| ... | WITH NAME | dut2_v4 -# import additional Lisp settings from resource file +| ... | WITH NAME | dut2_v4 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP6UNRLAY | IP4OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput Lisp tunnel verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -57,22 +60,21 @@ | | ... | throughput test at 2x 1.53mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 1.53mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc02-1460B-1t1c-ethip4lispip6-ip4base-ndrchk | | [Documentation] @@ -82,22 +84,21 @@ | | ... | throughput test at 2x 720000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc03-9000B-1t1c-ethip4lispip6-ip4base-ndrchk | | [Documentation] @@ -107,21 +108,20 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc04-64B-2t2c-ethip4lispip6-ip4base-ndrchk | | [Documentation] @@ -131,22 +131,21 @@ | | ... | throughput test at 2x 3.25mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.25mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc05-1460B-2t2c-ethip4lispip6-ip4base-ndrchk | | [Documentation] @@ -156,22 +155,21 @@ | | ... | throughput test at 2x 720000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc06-9000B-2t2c-ethip4lispip6-ip4base-ndrchk | | [Documentation] @@ -181,21 +179,20 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc07-64B-4t4c-ethip4lispip6-ip4base-ndrchk | | [Documentation] @@ -205,22 +202,21 @@ | | ... | throughput test at 2x 3.12mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.12mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc08-1460B-4t4c-ethip4lispip6-ip4base-ndrchk | | [Documentation] @@ -230,22 +226,21 @@ | | ... | throughput test at 2x 720000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 | tc09-9000B-4t4c-ethip4lispip6-ip4base-ndrchk | | [Documentation] @@ -255,18 +250,17 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv4 over IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} -| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} -| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 +| | ... | ${dut1_to_dut2_ip4o6} | ${dut1_to_tg_ip4o6} | ${dut2_to_dut1_ip4o6} +| | ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6} | ${dut_prefix4o6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid} +| | ... | ${dut1_ip4o6_static_adjacency} | ${dut2_ip4o6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv4 diff --git a/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrdisc.robot index 40077c1d78..d49ae42b60 100644 --- a/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4lispip6-ip4base-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,23 +15,22 @@ | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} -| ... | WITH NAME | dut1_v4 +| ... | WITH NAME | dut1_v4 | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} -| ... | WITH NAME | dut2_v4 -# import additional Lisp settings from resource file +| ... | WITH NAME | dut2_v4 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | IP4FWD | ENCAP | LISP | IP6UNRLAY | IP4OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4 +| ... | Documentation | *RFC6830: Pkt throughput Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -50,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -115,8 +114,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1460B-1t1c-ethip4lispip6-ip4base-ndrdisc | | [Documentation] @@ -179,8 +178,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4lispip6-ip4base-ndrdisc | | [Documentation] @@ -241,8 +240,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4lispip6-ip4base-ndrdisc | | [Documentation] @@ -305,8 +304,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1460B-2t2c-ethip4lispip6-ip4base-ndrdisc | | [Documentation] @@ -369,8 +368,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4lispip6-ip4base-ndrdisc | | [Documentation] @@ -431,8 +430,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4lispip6-ip4base-ndrdisc | | [Documentation] @@ -495,8 +494,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1460B-4t4c-ethip4lispip6-ip4base-ndrdisc | | [Documentation] @@ -559,8 +558,8 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4lispip6-ip4base-ndrdisc | | [Documentation] @@ -621,5 +620,5 @@ | | ... | ${binary_max} | 3-node-IPv4 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot index bcb211fcbd..34f9a5f8ee 100644 --- a/tests/perf/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot @@ -14,24 +14,21 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.QemuUtils +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY | ... | VHOST | VM +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Show Vpp Vhost On All DUTs -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1} -| ... | ${dut1_vm_refs} -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2} -| ... | ${dut2_vm_refs} +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-bridge +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with VXLANoIPv4 | ... | and vhost* | ... @@ -62,10 +59,10 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${vxlan_overhead} | ${50} -#Socket names +# Socket names | ${bd_id1}= | 1 | ${bd_id2}= | 2 | ${sock1}= | /tmp/sock-1-${bd_id1} @@ -138,7 +135,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -204,7 +202,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-IMIX-1t1c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -274,7 +273,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -342,7 +342,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -408,7 +409,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-IMIX-2t2c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -478,7 +480,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -546,7 +549,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -612,7 +616,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-IMIX-4t4c-ethip4vxlan-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -682,4 +687,5 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrdisc.robot index 9b3eb2418c..d83fbc4142 100644 --- a/tests/perf/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4vxlan-l2bdbasemaclrn-ndrdisc.robot @@ -13,18 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | L2BDMACLRN | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 | ${min_rate}pps | ${framesize} -| ... | 3-node-bridge | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-bridge +| ... | Documentation | *RFC2544: Packet throughput L2BD with VXLANoIPv4 test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -100,7 +100,8 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4vxlan-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -146,7 +147,8 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4vxlan-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -192,7 +194,8 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -240,7 +243,8 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -286,7 +290,8 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4vxlan-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -332,7 +337,8 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -380,7 +386,8 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -426,7 +433,8 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4vxlan-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -472,4 +480,5 @@ | | And L2 bridge domain with VXLANoIPv4 initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip4vxlan-l2xcbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip4vxlan-l2xcbase-ndrchk.robot index 3f079b28c8..dc7c4618ed 100644 --- a/tests/perf/10ge2p1x520-ethip4vxlan-l2xcbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip4vxlan-l2xcbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,15 +13,19 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | L2XCFWD | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs -| Documentation | *Reference NDR throughput L2XC with VXLANoIPv4 verify test cases* +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... +| Documentation | *Reference NDR throughput L2XC with VXLANoIPv4 verify test\ +| ... | cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. @@ -50,15 +54,14 @@ | | ... | frames using single trial throughput test at 2x 2.4mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.4mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc02-1518B-1t1c-ethip4vxlan-l2xcbase-ndrchk | | [Documentation] @@ -67,14 +70,13 @@ | | ... | frames using single trial throughput test at 2x 787153pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 787153pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc03-9000B-1t1c-ethip4vxlan-l2xcbase-ndrchk | | [Documentation] @@ -83,14 +85,13 @@ | | ... | frames using single trial throughput test at 2x 137816pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 137816pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc04-64B-2t2c-ethip4vxlan-l2xcbase-ndrchk | | [Documentation] @@ -99,15 +100,14 @@ | | ... | frames using single trial throughput test at 2x 5.2mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 5.2mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc05-1518B-2t2c-ethip4vxlan-l2xcbase-ndrchk | | [Documentation] @@ -116,14 +116,13 @@ | | ... | frames using single trial throughput test at 2x 787153pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 787153pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc06-9000B-2t2c-ethip4vxlan-l2xcbase-ndrchk | | [Documentation] @@ -132,14 +131,13 @@ | | ... | frames using single trial throughput test at 2x 137816pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 137816pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc07-64B-4t4c-ethip4vxlan-l2xcbase-ndrchk | | [Documentation] @@ -148,15 +146,14 @@ | | ... | frames using single trial throughput test at 2x 8.4mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 8.4mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc08-1518B-4t4c-ethip4vxlan-l2xcbase-ndrchk | | [Documentation] @@ -165,14 +162,13 @@ | | ... | frames using single trial throughput test at 2x 787153pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 787153pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect | tc09-9000B-4t4c-ethip4vxlan-l2xcbase-ndrchk | | [Documentation] @@ -181,11 +177,10 @@ | | ... | frames using single trial throughput test at 2x 137816pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 137816pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-xconnect +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And L2 xconnect with VXLANoIPv4 initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-xconnect diff --git a/tests/perf/10ge2p1x520-ethip4vxlan-l2xcbase-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip4vxlan-l2xcbase-ndrdisc.robot index f9b5a54594..4e31313cd4 100644 --- a/tests/perf/10ge2p1x520-ethip4vxlan-l2xcbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip4vxlan-l2xcbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,19 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | L2XCFWD | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-bridge +| ... | Documentation | *RFC2544: Pkt throughput L2XC with VXLANoIPv4 test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544, RFC7348. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -97,8 +96,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip4vxlan-l2xcbase-ndrdisc | | [Documentation] @@ -141,8 +140,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip4vxlan-l2xcbase-ndrdisc | | [Documentation] @@ -185,8 +184,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-ethip4vxlan-l2xcbase-ndrdisc | | [Documentation] @@ -231,8 +230,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip4vxlan-l2xcbase-ndrdisc | | [Documentation] @@ -275,8 +274,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip4vxlan-l2xcbase-ndrdisc | | [Documentation] @@ -319,8 +318,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-ethip4vxlan-l2xcbase-ndrdisc | | [Documentation] @@ -365,8 +364,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip4vxlan-l2xcbase-ndrdisc | | [Documentation] @@ -409,8 +408,8 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip4vxlan-l2xcbase-ndrdisc | | [Documentation] @@ -453,5 +452,5 @@ | | ... | ${binary_max} | 3-node-xconnect | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrchk.robot index 605989f321..0410d8085b 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,14 +14,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Cop +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv6 whitelist verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,21 +55,20 @@ | | ... | at 2x 2.8mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.8mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc02-1518B-1t1c-ethip6-ip6base-copwhtlistbase-ndrchk | | [Documentation] @@ -76,21 +78,20 @@ | | ... | at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc03-9000B-1t1c-ethip6-ip6base-copwhtlistbase-ndrchk | | [Documentation] @@ -100,20 +101,19 @@ | | ... | at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc04-78B-2t2c-ethip6-ip6base-copwhtlistbase-ndrchk | | [Documentation] @@ -123,21 +123,20 @@ | | ... | at 2x 4.9mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 4.9mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc05-1518B-2t2c-ethip6-ip6base-copwhtlistbase-ndrchk | | [Documentation] @@ -147,21 +146,20 @@ | | ... | at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc06-9000B-2t2c-ethip6-ip6base-copwhtlistbase-ndrchk | | [Documentation] @@ -171,20 +169,19 @@ | | ... | at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc07-78B-4t4c-ethip6-ip6base-copwhtlistbase-ndrchk | | [Documentation] @@ -194,21 +191,20 @@ | | ... | at 2x 10.1mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10.1mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc08-1518B-4t4c-ethip6-ip6base-copwhtlistbase-ndrchk | | [Documentation] @@ -218,21 +214,20 @@ | | ... | at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc09-9000B-4t4c-ethip6-ip6base-copwhtlistbase-ndrchk | | [Documentation] @@ -242,17 +237,16 @@ | | ... | at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | When IPv6 forwarding initialized in a 3-node circular topology -| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local -| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local -| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 -| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 -| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable -| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | When IPv6 forwarding initialized in a 3-node circular topology +| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local +| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local +| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1 +| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1 +| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable +| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 diff --git a/tests/perf/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrdisc.robot index 7f9fcaf0dc..c87fb7cbcd 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6base-copwhtlistbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,19 +14,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Cop +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | COPWHLIST +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6 +| ... | Documentation | *RFC2544: Pkt throughput IPv6 whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,7 +50,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -112,8 +111,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip6-ip6base-copwhtlistbase-ndrdisc | | [Documentation] @@ -172,8 +171,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6-ip6base-copwhtlistbase-ndrdisc | | [Documentation] @@ -230,8 +229,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc | | [Documentation] @@ -290,8 +289,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc | | [Documentation] @@ -350,8 +349,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6-ip6base-copwhtlistbase-ndrdisc | | [Documentation] @@ -408,8 +407,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc | | [Documentation] @@ -468,8 +467,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc | | [Documentation] @@ -528,8 +527,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6-ip6base-copwhtlistbase-ndrdisc | | [Documentation] @@ -586,5 +585,5 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrchk.robot index f87d21a0e0..ee01b4a0ae 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,15 +14,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Classify.Classify +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv6 whitelist verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -52,16 +54,15 @@ | | ... | at 2x 2.9mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.9mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc02-1518B-1t1c-ethip6-ip6base-iacldstbase-ndrchk | | [Documentation] @@ -71,16 +72,15 @@ | | ... | at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc03-9000B-1t1c-ethip6-ip6base-iacldstbase-ndrchk | | [Documentation] @@ -90,15 +90,14 @@ | | ... | at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc04-78B-2t2c-ethip6-ip6base-iacldstbase-ndrchk | | [Documentation] @@ -108,16 +107,15 @@ | | ... | at 2x 5.4mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 5.4mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc05-1518B-2t2c-ethip6-ip6base-iacldstbase-ndrchk | | [Documentation] @@ -127,16 +125,15 @@ | | ... | at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc06-9000B-2t2c-ethip6-ip6base-iacldstbase-ndrchk | | [Documentation] @@ -146,15 +143,14 @@ | | ... | at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc07-78B-4t4c-ethip6-ip6base-iacldstbase-ndrchk | | [Documentation] @@ -164,16 +160,15 @@ | | ... | at 2x 9.5mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 9.5mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc08-1518B-4t4c-ethip6-ip6base-iacldstbase-ndrchk | | [Documentation] @@ -183,16 +178,15 @@ | | ... | at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc09-9000B-4t4c-ethip6-ip6base-iacldstbase-ndrchk | | [Documentation] @@ -202,12 +196,11 @@ | | ... | at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | And IPv6 iAcl whitelist initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | And IPv6 iAcl whitelist initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 diff --git a/tests/perf/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrdisc.robot index aad70ee880..5e515da144 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6base-iacldstbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,19 +14,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.Classify.Classify +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | FEATURE | IACLDST +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6 +| ... | Documentation | *RFC2544: Pkt throughput IPv6 iAcl whitelist test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -101,8 +100,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip6-ip6base-iacldstbase-ndrdisc | | [Documentation] @@ -151,8 +150,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6-ip6base-iacldstbase-ndrdisc | | [Documentation] @@ -199,8 +198,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6-ip6base-iacldstbase-ndrdisc | | [Documentation] @@ -249,8 +248,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip6-ip6base-iacldstbase-ndrdisc | | [Documentation] @@ -299,8 +298,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6-ip6base-iacldstbase-ndrdisc | | [Documentation] @@ -347,8 +346,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6-ip6base-iacldstbase-ndrdisc | | [Documentation] @@ -397,8 +396,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip6-ip6base-iacldstbase-ndrdisc | | [Documentation] @@ -447,8 +446,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6-ip6base-iacldstbase-ndrdisc | | [Documentation] @@ -495,5 +494,5 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6base-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6-ip6base-ndrchk.robot index 743e417ed4..2792e2c9f0 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6base-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6base-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,14 +13,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv6 routing verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -49,15 +52,14 @@ | | ... | frames using single trial throughput test at 2x 2.9mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.9mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc02-1518B-1t1c-ethip6-ip6base-ndrchk | | [Documentation] @@ -66,15 +68,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc03-9000B-1t1c-ethip6-ip6base-ndrchk | | [Documentation] @@ -83,14 +84,13 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc04-78B-2t2c-ethip6-ip6base-ndrchk | | [Documentation] @@ -99,15 +99,14 @@ | | ... | frames using single trial throughput test at 2x 5.9mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 5.9mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc05-1518B-2t2c-ethip6-ip6base-ndrchk | | [Documentation] @@ -116,15 +115,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc06-9000B-2t2c-ethip6-ip6base-ndrchk | | [Documentation] @@ -133,14 +131,13 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc07-78B-4t4c-ethip6-ip6base-ndrchk | | [Documentation] @@ -149,15 +146,14 @@ | | ... | frames using single trial throughput test at 2x 7.3mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.3mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc08-1518B-4t4c-ethip6-ip6base-ndrchk | | [Documentation] @@ -166,15 +162,14 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc09-9000B-4t4c-ethip6-ip6base-ndrchk | | [Documentation] @@ -183,11 +178,10 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And IPv6 forwarding initialized in a 3-node circular topology -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And IPv6 forwarding initialized in a 3-node circular topology +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 diff --git a/tests/perf/10ge2p1x520-ethip6-ip6base-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip6-ip6base-ndrdisc.robot index 8d27d60064..38cd52b5a5 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6base-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6base-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,19 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE +| ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6 +| ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -48,7 +47,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -95,8 +94,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip6-ip6base-ndrdisc | | [Documentation] @@ -141,8 +140,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6-ip6base-ndrdisc | | [Documentation] @@ -185,8 +184,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6-ip6base-ndrdisc | | [Documentation] @@ -231,8 +230,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip6-ip6base-ndrdisc | | [Documentation] @@ -277,8 +276,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6-ip6base-ndrdisc | | [Documentation] @@ -321,8 +320,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6-ip6base-ndrdisc | | [Documentation] @@ -367,8 +366,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip6-ip6base-ndrdisc | | [Documentation] @@ -413,8 +412,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6-ip6base-ndrdisc | | [Documentation] @@ -457,5 +456,5 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot index 4c2139cc90..430bcb6123 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_200K +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv6 routing verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,17 +55,15 @@ | | ... | frames using single trial throughput test at 2x 2.3mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.3mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc02-1518B-1t1c-ethip6-ip6scale200k-ndrchk | | [Documentation] @@ -70,17 +72,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc03-9000B-1t1c-ethip6-ip6scale200k-ndrchk | | [Documentation] @@ -89,16 +89,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc04-78B-2t2c-ethip6-ip6scale200k-ndrchk | | [Documentation] @@ -107,17 +105,15 @@ | | ... | frames using single trial throughput test at 2x 4.8mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 4.8mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc05-1518B-2t2c-ethip6-ip6scale200k-ndrchk | | [Documentation] @@ -126,17 +122,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc06-9000B-2t2c-ethip6-ip6scale200k-ndrchk | | [Documentation] @@ -145,16 +139,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc07-78B-4t4c-ethip6-ip6scale200k-ndrchk | | [Documentation] @@ -163,17 +155,15 @@ | | ... | frames using single trial throughput test at 2x 7.7mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 7.7mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc08-1518B-4t4c-ethip6-ip6scale200k-ndrchk | | [Documentation] @@ -182,17 +172,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc09-9000B-4t4c-ethip6-ip6scale200k-ndrchk | | [Documentation] @@ -201,13 +189,11 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrdisc.robot index 7ca4c3091c..44e9efd676 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6scale200k-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,18 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_200K +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6-dst-${rts_per_flow} +| ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -49,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${rts_per_flow}= | ${100000} @@ -101,8 +101,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip6-ip6scale200k-ndrdisc | | [Documentation] @@ -151,8 +151,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6-ip6scale200k-ndrdisc | | [Documentation] @@ -199,8 +199,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6-ip6scale200k-ndrdisc | | [Documentation] @@ -249,8 +249,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip6-ip6scale200k-ndrdisc | | [Documentation] @@ -299,8 +299,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6-ip6scale200k-ndrdisc | | [Documentation] @@ -347,8 +347,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6-ip6scale200k-ndrdisc | | [Documentation] @@ -397,8 +397,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip6-ip6scale200k-ndrdisc | | [Documentation] @@ -447,8 +447,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6-ip6scale200k-ndrdisc | | [Documentation] @@ -495,5 +495,5 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6scale20k-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6-ip6scale20k-ndrchk.robot index 3f49250cb3..61883be805 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6scale20k-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6scale20k-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_20K +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv6 routing verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,17 +55,15 @@ | | ... | frames using single trial throughput test at 2x 2.9mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 2.9mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc02-1518B-1t1c-ethip6-ip6scale20k-ndrchk | | [Documentation] @@ -70,17 +72,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc03-9000B-1t1c-ethip6-ip6scale20k-ndrchk | | [Documentation] @@ -89,16 +89,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc04-78B-2t2c-ethip6-ip6scale20k-ndrchk | | [Documentation] @@ -107,17 +105,15 @@ | | ... | frames using single trial throughput test at 2x 5.9mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 5.9mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc05-1518B-2t2c-ethip6-ip6scale20k-ndrchk | | [Documentation] @@ -126,17 +122,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc06-9000B-2t2c-ethip6-ip6scale20k-ndrchk | | [Documentation] @@ -145,16 +139,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc07-78B-4t4c-ethip6-ip6scale20k-ndrchk | | [Documentation] @@ -163,17 +155,15 @@ | | ... | frames using single trial throughput test at 2x 10.0mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 10.0mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc08-1518B-4t4c-ethip6-ip6scale20k-ndrchk | | [Documentation] @@ -182,17 +172,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc09-9000B-4t4c-ethip6-ip6scale20k-ndrchk | | [Documentation] @@ -201,13 +189,11 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6scale20k-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip6-ip6scale20k-ndrdisc.robot index b96643309e..35dc6aecba 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6scale20k-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6scale20k-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,18 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_20K +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6-dst-${rts_per_flow} +| ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -49,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${rts_per_flow}= | ${10000} @@ -101,8 +101,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip6-ip6scale20k-ndrdisc | | [Documentation] @@ -151,8 +151,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6-ip6scale20k-ndrdisc | | [Documentation] @@ -199,8 +199,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6-ip6scale20k-ndrdisc | | [Documentation] @@ -249,8 +249,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip6-ip6scale20k-ndrdisc | | [Documentation] @@ -299,8 +299,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6-ip6scale20k-ndrdisc | | [Documentation] @@ -347,8 +347,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6-ip6scale20k-ndrdisc | | [Documentation] @@ -397,8 +397,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip6-ip6scale20k-ndrdisc | | [Documentation] @@ -447,8 +447,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6-ip6scale20k-ndrdisc | | [Documentation] @@ -495,5 +495,5 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrchk.robot index 8b163fb18a..d00eed7cbf 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,13 +13,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_2M +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput IPv6 routing verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -51,17 +55,15 @@ | | ... | frames using single trial throughput test at 2x 1.8mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 1.8mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc02-1518B-1t1c-ethip6-ip6scale2m-ndrchk | | [Documentation] @@ -70,17 +72,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc03-9000B-1t1c-ethip6-ip6scale2m-ndrchk | | [Documentation] @@ -89,16 +89,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc04-78B-2t2c-ethip6-ip6scale2m-ndrchk | | [Documentation] @@ -107,17 +105,15 @@ | | ... | frames using single trial throughput test at 2x 4.0mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 4.0mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc05-1518B-2t2c-ethip6-ip6scale2m-ndrchk | | [Documentation] @@ -126,17 +122,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc06-9000B-2t2c-ethip6-ip6scale2m-ndrchk | | [Documentation] @@ -145,16 +139,14 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc07-78B-4t4c-ethip6-ip6scale2m-ndrchk | | [Documentation] @@ -163,17 +155,15 @@ | | ... | frames using single trial throughput test at 2x 6.8mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 6.8mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc08-1518B-4t4c-ethip6-ip6scale2m-ndrchk | | [Documentation] @@ -182,17 +172,15 @@ | | ... | frames using single trial throughput test at 2x 812743pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 812743pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} | tc09-9000B-4t4c-ethip6-ip6scale2m-ndrchk | | [Documentation] @@ -201,13 +189,11 @@ | | ... | frames using single trial throughput test at 2x 138580pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 138580pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs -| | And Scale IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${rts_per_flow} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} -| | ... | 3-node-IPv6-dst-${rts_per_flow} +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs +| | And Scale IPv6 forwarding initialized in a 3-node circular topology +| | ... | ${rts_per_flow} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} diff --git a/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrdisc.robot index d7f230d960..d91af1d2aa 100644 --- a/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip6-ip6scale2m-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,18 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_2M +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6-dst-${rts_per_flow} -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6-dst-${rts_per_flow} +| ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -49,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${rts_per_flow}= | ${1000000} @@ -101,8 +101,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip6-ip6scale2m-ndrdisc | | [Documentation] @@ -151,8 +151,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6-ip6scale2m-ndrdisc | | [Documentation] @@ -199,8 +199,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6-ip6scale2m-ndrdisc | | [Documentation] @@ -249,8 +249,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip6-ip6scale2m-ndrdisc | | [Documentation] @@ -299,8 +299,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6-ip6scale2m-ndrdisc | | [Documentation] @@ -347,8 +347,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6-ip6scale2m-ndrdisc | | [Documentation] @@ -397,8 +397,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip6-ip6scale2m-ndrdisc | | [Documentation] @@ -447,8 +447,8 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6-ip6scale2m-ndrdisc | | [Documentation] @@ -495,5 +495,5 @@ | | ... | 3-node-IPv6-dst-${rts_per_flow} | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrchk.robot index 59b11545d4..04baa6ed10 100644 --- a/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,18 +15,21 @@ | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} -| ... | WITH NAME | dut1_v4 +| ... | WITH NAME | dut1_v4 | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} -| ... | WITH NAME | dut2_v4 -# import additional Lisp settings from resource file +| ... | WITH NAME | dut2_v4 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput Lisp tunnel verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -57,22 +60,21 @@ | | ... | throughput test at 2x 1.75mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 1.75mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc02-1460B-1t1c-ethip6lispip4-ip6base-ndrchk | | [Documentation] @@ -82,22 +84,21 @@ | | ... | throughput test at 2x 720000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc03-9000B-1t1c-ethip6lispip4-ip6base-ndrchk | | [Documentation] @@ -107,21 +108,20 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc04-78B-2t2c-ethip6lispip4-ip6base-ndrchk | | [Documentation] @@ -131,22 +131,21 @@ | | ... | throughput test at 2x 3.42mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.42mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc05-1460B-2t2c-ethip6lispip4-ip6base-ndrchk | | [Documentation] @@ -156,22 +155,21 @@ | | ... | throughput test at 2x 720000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc06-9000B-2t2c-ethip6lispip4-ip6base-ndrchk | | [Documentation] @@ -181,21 +179,20 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc07-78B-4t4c-ethip6lispip4-ip6base-ndrchk | | [Documentation] @@ -205,22 +202,21 @@ | | ... | throughput test at 2x 3.42mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.42mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc08-1460B-4t4c-ethip6lispip4-ip6base-ndrchk | | [Documentation] @@ -230,22 +226,21 @@ | | ... | throughput test at 2x 720000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 720000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc09-9000B-4t4c-ethip6lispip4-ip6base-ndrchk | | [Documentation] @@ -255,18 +250,17 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 over IPv4 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} -| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} -| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6o4} | ${dut1_to_tg_ip6o4} | ${dut2_to_dut1_ip6o4} +| | ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4} | ${dut_prefix6o4} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid} +| | ... | ${dut1_ip6o4_static_adjacency} | ${dut2_ip6o4_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 diff --git a/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrdisc.robot index f6d693cd04..dbd7f7b29f 100644 --- a/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip6lispip4-ip6base-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,23 +15,22 @@ | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} -| ... | WITH NAME | dut1_v4 +| ... | WITH NAME | dut1_v4 | Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} -| ... | WITH NAME | dut2_v4 -# import additional Lisp settings from resource file +| ... | WITH NAME | dut2_v4 | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP4UNRLAY | IP6OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6 +| ... | Documentation | *RFC6830: Pkt throughput Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -50,7 +49,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -115,8 +114,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1460B-1t1c-ethip6lispip4-ip6base-ndrdisc | | [Documentation] @@ -179,8 +178,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6lispip4-ip6base-ndrdisc | | [Documentation] @@ -241,8 +240,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6lispip4-ip6base-ndrdisc | | [Documentation] @@ -305,8 +304,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1460B-2t2c-ethip6lispip4-ip6base-ndrdisc | | [Documentation] @@ -369,8 +368,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6lispip4-ip6base-ndrdisc | | [Documentation] @@ -431,8 +430,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6lispip4-ip6base-ndrdisc | | [Documentation] @@ -495,8 +494,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1460B-4t4c-ethip6lispip4-ip6base-ndrdisc | | [Documentation] @@ -559,8 +558,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6lispip4-ip6base-ndrdisc | | [Documentation] @@ -621,5 +620,5 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot b/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot index 85f46d1b58..08e1198e2a 100644 --- a/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot +++ b/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrchk.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,15 +14,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot -# import additional Lisp settings from resource file | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRCHK | ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance ndrchk test teardown +| ... | Documentation | *Reference NDR throughput Lisp tunnel verify test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -53,22 +56,21 @@ | | ... | throughput test at 2x 1.56mpps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 1.56mpps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc02-1460B-1t1c-ethip6lispip6-ip6base-ndrchk | | [Documentation] @@ -78,22 +80,21 @@ | | ... | throughput test at 2x 740000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 740000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc03-9000B-1t1c-ethip6lispip6-ip6base-ndrchk | | [Documentation] @@ -103,21 +104,20 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 1T1C | STHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '1' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc04-78B-2t2c-ethip6lispip6-ip6base-ndrchk | | [Documentation] @@ -127,22 +127,21 @@ | | ... | throughput test at 2x 3.2mpps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.2mpps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc05-1460B-2t2c-ethip6lispip6-ip6base-ndrchk | | [Documentation] @@ -152,22 +151,21 @@ | | ... | throughput test at 2x 740000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 740000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc06-9000B-2t2c-ethip6lispip6-ip6base-ndrchk | | [Documentation] @@ -177,21 +175,20 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 2T2C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '2' worker threads and rxqueues '1' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc07-78B-4t4c-ethip6lispip6-ip6base-ndrchk | | [Documentation] @@ -201,22 +198,21 @@ | | ... | throughput test at 2x 3.2mpps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 78 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 3.2mpps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc08-1460B-4t4c-ethip6lispip6-ip6base-ndrchk | | [Documentation] @@ -226,22 +222,21 @@ | | ... | throughput test at 2x 740000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 1460 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 740000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Add No Multi Seg to all DUTs +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 | tc09-9000B-4t4c-ethip6lispip6-ip6base-ndrchk | | [Documentation] @@ -251,19 +246,18 @@ | | ... | throughput test at 2x 120000pps. | | [Tags] | 4T4C | MTHREAD | | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 | | ${rate}= | Set Variable | 120000pps | | Given Add '4' worker threads and rxqueues '2' in 3-node single-link topo -| | And Add PCI devices to DUTs from 3-node single link topology -| | And Apply startup configuration on all VPP DUTs +| | And Add PCI devices to DUTs from 3-node single link topology +| | And Apply startup configuration on all VPP DUTs | | When Lisp IPv6 forwarding initialized in a 3-node circular topology -| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} -| | ... | ${dut2_to_tg_ip6} | ${prefix6} -| | And Set up Lisp topology -| | ... | ${dut1} | ${dut1_if2} | ${NONE} -| | ... | ${dut2} | ${dut2_if1} | ${NONE} -| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} -| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv6 +| | ... | ${dut1_to_dut2_ip6} | ${dut1_to_tg_ip6} | ${dut2_to_dut1_ip6} +| | ... | ${dut2_to_tg_ip6} | ${prefix6} +| | And Set up Lisp topology +| | ... | ${dut1} | ${dut1_if2} | ${NONE} +| | ... | ${dut2} | ${dut2_if1} | ${NONE} +| | ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid} +| | ... | ${dut1_ip6_static_adjacency} | ${dut2_ip6_static_adjacency} +| | Then Traffic should pass with no loss | ${perf_trial_duration} | ${rate} +| | ... | ${framesize} | 3-node-IPv6 diff --git a/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrdisc.robot b/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrdisc.robot index 88ccc5508b..2cc52af330 100644 --- a/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrdisc.robot +++ b/tests/perf/10ge2p1x520-ethip6lispip6-ip6base-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,20 +14,19 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Resource | resources/libraries/robot/lisp/lisp_static_adjacency.robot -# import additional Lisp settings from resource file | Variables | resources/test_data/lisp/performance/lisp_static_adjacency.py +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | IP6FWD | ENCAP | LISP | IP6UNRLAY | IP6OVRLAY +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6 +| ... | Documentation | *RFC6830: Pkt throughput Lisp test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -46,7 +45,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC6830. *** Variables *** -#X520-DA2 bandwidth limit +# X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} *** Test Cases *** @@ -111,8 +110,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1460B-1t1c-ethip6lispip6-ip6base-ndrdisc | | [Documentation] @@ -175,8 +174,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6lispip6-ip6base-ndrdisc | | [Documentation] @@ -237,8 +236,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6lispip6-ip6base-ndrdisc | | [Documentation] @@ -301,8 +300,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1460B-2t2c-ethip6lispip6-ip6base-ndrdisc | | [Documentation] @@ -365,8 +364,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6lispip6-ip6base-ndrdisc | | [Documentation] @@ -427,8 +426,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6lispip6-ip6base-ndrdisc | | [Documentation] @@ -491,8 +490,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1460B-4t4c-ethip6lispip6-ip6base-ndrdisc | | [Documentation] @@ -555,8 +554,8 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6lispip6-ip6base-ndrdisc | | [Documentation] @@ -617,5 +616,5 @@ | | ... | ${binary_max} | 3-node-IPv6 | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| | ... | ${glob_loss_acceptance} -| | ... | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot index a29c1a06a8..27eec1bc7e 100644 --- a/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,23 +14,20 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.QemuUtils +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X710 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Show Vpp Vhost On All DUTs -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1} -| ... | ${dut1_vm_refs} -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2} -| ... | ${dut2_vm_refs} +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-bridge +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -132,7 +129,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -198,7 +196,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -265,7 +264,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -331,7 +331,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -397,7 +398,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -465,7 +467,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -531,7 +534,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -597,7 +601,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -665,4 +670,5 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot b/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot index 2695d7a344..9ff8368eb4 100644 --- a/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot +++ b/tests/perf/10ge2p1x710-eth-l2bdbasemaclrn-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,19 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X710 | ETH | L2BDMACLRN | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-X710 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-bridge +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -49,7 +48,7 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#X710 bandwidth limit +# X710 bandwidth limit | ${s_limit} | ${10000000000} *** Keywords *** @@ -88,7 +87,7 @@ | | Find PDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc diff --git a/tests/perf/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot b/tests/perf/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot index 9629650436..879bfa427b 100644 --- a/tests/perf/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot +++ b/tests/perf/40ge2p1vic1385-eth-l2bdbasemaclrn-ndrdisc.robot @@ -14,19 +14,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.NodePath +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Cisco-VIC-1385 | ETH | L2BDMACLRN | BASE +| ... | NIC_Cisco-VIC-1385 | ETH | L2BDMACLRN | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Cisco-VIC-1385 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-bridge +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -102,7 +101,8 @@ | | And L2 bridge domain initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-eth-l2bdbasemaclrn-ndrdisc | | [Documentation] @@ -198,7 +198,8 @@ | | And L2 bridge domain initialized in a 3-node circular topology | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-eth-l2bdbasemaclrn-ndrdisc | | [Documentation] diff --git a/tests/perf/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot b/tests/perf/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot index 9a17a8d153..3fc4444cb5 100644 --- a/tests/perf/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot +++ b/tests/perf/40ge2p1xl710-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,23 +14,20 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.QemuUtils +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE | VHOST | VM +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-XL710 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Show Vpp Vhost On All DUTs -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut1} -| ... | ${dut1_vm_refs} -| ... | AND | Guest VM with dpdk-testpmd Teardown | ${dut2} -| ... | ${dut2_vm_refs} +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test with vhost and VM with dpdk-testpmd teardown +| ... | ${min_rate}pps | ${framesize} | 3-node-bridge +| ... | dut1_node=${dut1} | dut1_vm_refs=${dut1_vm_refs} +| ... | dut2_node=${dut2} | dut2_vm_refs=${dut2_vm_refs} +| ... | Documentation | *RFC2544: Packet throughput L2BD test cases with vhost* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -134,7 +131,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -200,7 +198,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc05-IMIX-1t1c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -267,7 +266,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc07-64B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -333,7 +333,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -399,7 +400,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc11-IMIX-2t2c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -467,7 +469,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc13-64B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -533,7 +536,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -599,7 +603,8 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} | tc17-IMIX-4t4c-eth-l2bdbasemaclrn-eth-2vhost-1vm-ndrdisc | | [Documentation] @@ -667,4 +672,5 @@ | | And Setup scheduler policy for VPP on all DUTs | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | 3-node-bridge | ${min_rate} | ${max_rate} -| | ... | ${threshold} | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${threshold} | ${perf_pdr_loss_acceptance} +| | ... | ${perf_pdr_loss_acceptance_type} diff --git a/tests/perf/40ge2p1xl710-eth-l2bdbasemaclrn-ndrdisc.robot b/tests/perf/40ge2p1xl710-eth-l2bdbasemaclrn-ndrdisc.robot index 112aa856af..ac8d19c19d 100644 --- a/tests/perf/40ge2p1xl710-eth-l2bdbasemaclrn-ndrdisc.robot +++ b/tests/perf/40ge2p1xl710-eth-l2bdbasemaclrn-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -14,19 +14,17 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.NodePath +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE +| ... | NIC_Intel-XL710 | ETH | L2BDMACLRN | BASE | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-XL710 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-bridge -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-bridge +| ... | Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\ @@ -50,9 +48,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps | ${s_24.5G} | ${24500000000} -#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps | ${s_18.75Mpps} | ${18750000} *** Keywords *** @@ -109,7 +107,7 @@ | | Find PDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | L2 Bridge Domain PDR Binary Search | | [Arguments] | ${framesize} | ${min_rate} | ${wt} | ${rxq} | ${s_limit} @@ -128,7 +126,7 @@ | | Find PDR using binary search and pps | | ... | ${framesize} | ${binary_min} | ${binary_max} | 3-node-bridge | | ... | ${min_rate} | ${max_rate} | ${threshold} -| | ... | ${glob_loss_acceptance} | ${glob_loss_acceptance_type} +| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} *** Test Cases *** | tc01-64B-1t1c-eth-l2bdbasemaclrn-ndrdisc diff --git a/tests/perf/40ge2p1xl710-eth-l2xcbase-ndrdisc.robot b/tests/perf/40ge2p1xl710-eth-l2xcbase-ndrdisc.robot index 263ff88768..c80d6f901a 100644 --- a/tests/perf/40ge2p1xl710-eth-l2xcbase-ndrdisc.robot +++ b/tests/perf/40ge2p1xl710-eth-l2xcbase-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -15,19 +15,18 @@ | Resource | resources/libraries/robot/performance.robot | Library | resources.libraries.python.InterfaceUtil | Library | resources.libraries.python.NodePath +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-XL710 | ETH | L2XCFWD | BASE +| ... | NIC_Intel-XL710 | ETH | L2XCFWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L2 | Intel-XL710 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-xconnect -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-xconnect +| ... | Documentation | *RFC2544: Pkt throughput L2XC test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -50,9 +49,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps | ${s_24.5G} | ${24500000000} -#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps | ${s_18.75Mpps} | ${18750000} *** Test Cases *** diff --git a/tests/perf/40ge2p1xl710-ethip4-ip4base-ndrdisc.robot b/tests/perf/40ge2p1xl710-ethip4-ip4base-ndrdisc.robot index 92f5acb538..cc04ea0d5c 100644 --- a/tests/perf/40ge2p1xl710-ethip4-ip4base-ndrdisc.robot +++ b/tests/perf/40ge2p1xl710-ethip4-ip4base-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -16,21 +16,22 @@ | Library | resources.libraries.python.topology.Topology | Library | resources.libraries.python.NodePath | Library | resources.libraries.python.InterfaceUtil -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} +| ... | WITH NAME | dut1_v4 +| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} +| ... | WITH NAME | dut2_v4 +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-XL710 | ETH | IP4FWD | BASE +| ... | NIC_Intel-XL710 | ETH | IP4FWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-XL710 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv4 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv4 +| ... | Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -54,9 +55,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps | ${s_24.5G} | ${24500000000} -#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps | ${s_18.75Mpps} | ${18750000} *** Test Cases *** diff --git a/tests/perf/40ge2p1xl710-ethip6-ip6base-ndrdisc.robot b/tests/perf/40ge2p1xl710-ethip6-ip6base-ndrdisc.robot index 1daa6e1dfb..b8d33045b9 100644 --- a/tests/perf/40ge2p1xl710-ethip6-ip6base-ndrdisc.robot +++ b/tests/perf/40ge2p1xl710-ethip6-ip6base-ndrdisc.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -13,19 +13,18 @@ *** Settings *** | Resource | resources/libraries/robot/performance.robot +| ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC -| ... | NIC_Intel-XL710 | ETH | IP6FWD | BASE +| ... | NIC_Intel-XL710 | ETH | IP6FWD | BASE +| ... | Suite Setup | 3-node Performance Suite Setup with DUT's NIC model | ... | L3 | Intel-XL710 | Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords -| ... | Run Keyword If Test Failed -| ... | Traffic should pass with no loss | 10 -| ... | ${min_rate}pps | ${framesize} | 3-node-IPv6 -| ... | fail_on_loss=${False} -| ... | AND | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs +| ... +| Test Setup | Performance test setup +| Test Teardown | Performance test teardown | ${min_rate}pps | ${framesize} +| ... | 3-node-IPv6 +| ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology @@ -48,9 +47,9 @@ | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** -#XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps +# XL710-DA2 bandwidth limit ~49Gbps/2=24.5Gbps | ${s_24.5G} | ${24500000000} -#XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps +# XL710-DA2 Mpps limit 37.5Mpps/2=18.75Mpps | ${s_18.75Mpps} | ${18750000} *** Test Cases *** diff --git a/tests/perf/__init__.robot b/tests/perf/__init__.robot index 7efa763f57..845716780f 100644 --- a/tests/perf/__init__.robot +++ b/tests/perf/__init__.robot @@ -1,4 +1,4 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. +# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: @@ -16,8 +16,25 @@ | Resource | resources/libraries/robot/interfaces.robot | Library | resources.libraries.python.SetupFramework | Library | resources.libraries.python.CpuUtils -| Suite Setup | Run Keywords | Setup Framework | ${nodes} +| Suite Setup | Run Keywords | Setup performance global Variables +| ... | AND | Setup Framework | ${nodes} | ... | AND | Setup All DUTs | ${nodes} | ... | AND | Get CPU Layout from all nodes | ${nodes} | ... | AND | Update All Interface Data On All Nodes | ... | ${nodes} | skip_tg=${True} | numa_node=${True} + +*** Keywords *** +| Setup performance global Variables +| | [Documentation] +| | ... | Setup suite Variables. Variables are used across performance testing. +| | ... +| | ... | _NOTE:_ This KW sets following suite variables: +| | ... | - perf_trial_duration - Duration of traffic run [s]. +| | ... | - perf_pdr_loss_acceptance - Loss acceptance treshold +| | ... | - perf_pdr_loss_acceptance_type - Loss acceptance treshold type +| | ... | - perf_vm_image - Guest VM disk image +| | ... +| | Set Global Variable | ${perf_trial_duration} | 10 +| | Set Global Variable | ${perf_pdr_loss_acceptance} | 0.5 +| | Set Global Variable | ${perf_pdr_loss_acceptance_type} | percentage +| | Set Global Variable | ${perf_vm_image} | /var/lib/vm/csit-nested-1.6.img |