CSIT-220: Rename directories in tests directory

- Move performance directory one level up and rename it to “perf”
- Rename “suites” directory to “func”
- Create __init__.py in “perf” directory
- Rename fds_related_tests to fds

Change-Id: I59f06afe1c5b95dd8a48417b8fbfd1fca8797097
Signed-off-by: Matej Klotton <mklotton@cisco.com>

2 files changed, 0 insertions, 396 deletions

diff --git a/tests/suites/lisp/lisp_api_untagged.robot b/tests/suites/lisp/lisp_api_untagged.robot
deleted file mode 100644
index f92a92d435..0000000000
--- a/tests/suites/lisp/lisp_api_untagged.robot
+++ /dev/null
@@ -1,119 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.topology.Topology
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.LispUtil
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/interfaces.robot
-| Resource | resources/libraries/robot/lisp/lisp_api.robot
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/api/lisp_api_resources.py
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| Test Setup | Run Keywords | Setup all DUTs before test
-| ...        | AND          | Setup all TGs before traffic script
-| ...        | AND          | Update All Interface Data On All Nodes | ${nodes}
-| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| ...           | AND          | Show vpp trace dump on all DUTs
-| Documentation | *LISP API test cases*
-| ...
-| ... | *[Top] Network Topologies:* DUT1 1-node topology.
-| ... | *[Enc] Packet Encapsulations:* None.
-| ... | *[Cfg] DUT configuration:* DUT1 gets configured with all LISP
-| ... | parameters.
-| ... | *[Ver] Verification:* DUT1 operational data gets verified following
-| ... | configuration.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Variables ***
-| ${locator_set_num}= | 3
-
-*** Test Cases ***
-
-| TC01: DUT can enable and disable LISP
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP enable/disable API; On \
-| | ... | DUT1 enable LISP. [Ver1] Check DUT1 if LISP is enabled. [Cfg2]
-| | ... | Then disable LISP. [Ver2] Check DUT1 if LISP is disabled. [Ref]
-| | ... | RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | When Enable lisp | ${nodes['DUT1']}
-| | Then Check if lisp is enabled | ${nodes['DUT1']} | ${lisp_status}
-| | When Disable lisp | ${nodes['DUT1']}
-| | Then Check if lisp is disabled | ${nodes['DUT1']} | ${lisp_status}
-
-| TC02: DUT can add and delete locator_set
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP locator_set API; on \
-| | ... | DUT1 configure locator_set and locator. [Ver1] Check DUT1
-| | ... | configured locator_set and locator are correct. [Cfg2] Then
-| | ... | remove locator_set and locator. [Ver2] check DUT1 locator_set
-| | ... | and locator are removed. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Lisp locator_set data is prepared
-| | ... | ${nodes['DUT1']} | ${locator_set_num}
-| | And   Enable lisp | ${nodes['DUT1']}
-| | When Lisp locator_set data is set | ${nodes['DUT1']}
-| | Then Lisp locator_set is set correctly | ${nodes['DUT1']}
-| | When Delete all lisp locator_set from VPP | ${nodes['DUT1']}
-| | Then Lisp locator_set should be unset | ${nodes['DUT1']}
-
-| TC03: DUT can add, reset and delete locator_set
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP locator_set API; on \
-| | ... | DUT1 configure locator_set and locator. [Ver1] Check DUT1
-| | ... | locator_set and locator are correct. [Cfg2] Then reset
-| | ... | locator_set and set it again. [Ver2] Check DUT1 locator_set and
-| | ... | locator are correct. [Cfg3] Then remove locator_set and locator.
-| | ... | [Ver3] Check DUT1 all locator_set and locators are removed.
-| | ... | [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Lisp locator_set data use for test reset locator_set are prepared
-| | ... | ${nodes['DUT1']} | ${locator_set_num}
-| | And   Enable lisp | ${nodes['DUT1']}
-| | When Lisp locator_set data is set | ${nodes['DUT1']}
-| | Then Lisp locator_set is set correctly | ${nodes['DUT1']}
-| | When Delete all lisp locator_set from VPP | ${nodes['DUT1']}
-| | Then Lisp locator_set should be unset | ${nodes['DUT1']}
-
-| TC04: DUT can add and delete eid address
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP eid API; on DUT1 \
-| | ... | configure LISP eid IP address. [Ver1] Check DUT1 configured data
-| | ... | is correct. [Cfg2] Remove configured data. [Ver2] Check DUT1 all
-| | ... | eid IP addresses are removed. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Enable lisp | ${nodes['DUT1']}
-| | When Lisp eid address is set | ${nodes['DUT1']} | ${eid_table}
-| | Then Lisp eid address is set correctly to eid table | ${nodes['DUT1']}
-| | ...                                                 | ${eid_table}
-| | When Delete all lisp eid address from VPP | ${nodes['DUT1']} | ${eid_table}
-| | Then Lisp eid table should be empty | ${nodes['DUT1']}
-
-| TC05: DUT can add and delete LISP map resolver address
-| | [Documentation]
-| | ... | [Top] DUT1. [Enc] None. [Cfg1] Test LISP map resolver address \
-| | ... | API; on DUT1 configure LISP map resolver address. [Ver1] Check
-| | ... | DUT1 configured data is correct. [Cfg2] Remove configured data.
-| | ... | [Ver2] Check DUT1 all map resolver addresses are removed. [Ref]
-| | ... | RFC6830.
-| | Given Enable lisp | ${nodes['DUT1']}
-| | When Lisp map resolver address is set | ${nodes['DUT1']} | ${map_resolver}
-| | Then Lisp map resolver address is set correctly | ${nodes['DUT1']}
-| | ...                                             | ${map_resolver}
-| | When Delete all lisp map resolver address from VPP | ${nodes['DUT1']}
-| | ...                                                | ${map_resolver}
-| | Then Lip map resolver address should be empty | ${nodes['DUT1']}
diff --git a/tests/suites/lisp/lisp_dataplane_untagged.robot b/tests/suites/lisp/lisp_dataplane_untagged.robot
deleted file mode 100644
index 0808d366c6..0000000000
--- a/tests/suites/lisp/lisp_dataplane_untagged.robot
+++ /dev/null
@@ -1,277 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/default.robot
-| Resource | resources/libraries/robot/testing_path.robot
-| Resource | resources/libraries/robot/ipv4.robot
-| Resource | resources/libraries/robot/traffic.robot
-| Resource | resources/libraries/robot/lisp/lisp_static_mapping.robot
-| Resource | resources/libraries/robot/l2_traffic.robot
-| Library  | resources.libraries.python.IPUtil
-| Library  | resources.libraries.python.Trace
-| Library  | resources.libraries.python.IPv4Util.IPv4Util
-# import additional Lisp settings from resource file
-| Variables | resources/test_data/lisp/static_mapping/lisp_static_mapping.py
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ... | VM_ENV | HW_ENV
-| Test Setup | Run Keywords | Setup all DUTs before test
-| ...        | AND          | Setup all TGs before traffic script
-| ...        | AND          | Update All Interface Data On All Nodes | ${nodes}
-| Test Teardown | Run Keywords | Show Packet Trace on All DUTs | ${nodes}
-| ...           | AND          | Show vpp trace dump on all DUTs
-| Documentation | *LISP static remote mapping test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISP-IPv4-ICMPv4 on DUT1-DUT2,
-| ... | Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv4 tunnel;
-| ... | Eth-IPv6-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn for
-| ... | IPv6 routing over LISPoIPv6 tunnel; Eth-IPv6-LISP-IPv4-ICMPv4 on
-| ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn for IPv4 routing over LISPoIPv6
-| ... | tunnel; Eth-IPv4-LISP-IPv6-ICMPv6 on DUT1-DUT2, Eth-IPv6-ICMPv6 on
-| ... | TG-DUTn for IPv6 routing over LISPoIPv4 tunnel.
-| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 (IPv6)
-| ... | routing and static routes. LISPoIPv4 (oIPv6) tunnel is configured
-| ... | between DUT1 and DUT2.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets
-| ... | are sent in both directions by TG on links to DUT1 and DUT2; on receive
-| ... | TG verifies packets for correctness and their IPv4 (IPv6) src-addr,
-| ... | dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC6830.
-
-*** Test Cases ***
-| TC01: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv4 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv4 LISP remote static mappings. [Ver] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And   Interfaces in 3-node path are up
-| | And   IP addresses are set on interfaces
-| |       ... | ${dut1_node} | ${dut1_to_dut2}
-| |       ... | ${dut1_to_dut2_ip4} | ${prefix4}
-| |       ... | ${dut1_node} | ${dut1_to_tg}
-| |       ... | ${dut1_to_tg_ip4} | ${prefix4}
-| |       ... | ${dut2_node} | ${dut2_to_dut1}
-| |       ... | ${dut2_to_dut1_ip4} | ${prefix4}
-| |       ... | ${dut2_node} | ${dut2_to_tg}
-| |       ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And   VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | And   VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | And   Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| |       ... | ${tg_to_dut2_mac}
-| | And   Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| |       ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| |      ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| |      ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| |      ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| |      ... | ${dut1_ip4_static_mapping} | ${dut2_ip4_static_mapping}
-| | Then Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC02: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv6 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-LISP-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv6 LISP remote static mappings. [Ver] Make TG send
-| | ... | ICMPv6 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And   Interfaces in 3-node path are up
-| | And   IP addresses are set on interfaces
-| |       ... | ${dut1_node} | ${dut1_to_dut2}
-| |       ... | ${dut1_to_dut2_ip6} | ${prefix6}
-| |       ... | ${dut1_node} | ${dut1_to_tg}
-| |       ... | ${dut1_to_tg_ip6} | ${prefix6}
-| |       ... | ${dut2_node} | ${dut2_to_dut1}
-| |       ... | ${dut2_to_dut1_ip6} | ${prefix6}
-| |       ... | ${dut2_node} | ${dut2_to_tg}
-| |       ... | ${dut2_to_tg_ip6} | ${prefix6}
-| | And   VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6}
-| | And   VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6}
-| | And   Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6}
-| |       ... | ${tg_to_dut2_mac}
-| | And   Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6}
-| |       ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| |      ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| |      ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| |      ... | ${duts_locator_set} | ${dut1_ip6_eid} | ${dut2_ip6_eid}
-| |      ... | ${dut1_ip6_static_mapping} | ${dut2_ip6_static_mapping}
-| | Then Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg1_ip6} | ${tg2_ip6}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg2_ip6} | ${tg1_ip6}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC03: DUT1 and DUT2 route IPv4 bidirectionally over LISPoIPv6 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv6-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv6 LISP remote static mappings. [Ver] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And   Interfaces in 3-node path are up
-| | And   IP addresses are set on interfaces
-| |       ... | ${dut1_node} | ${dut1_to_dut2}
-| |       ... | ${dut1_to_dut2_ip4o6} | ${dut_prefix4o6}
-| |       ... | ${dut1_node} | ${dut1_to_tg}
-| |       ... | ${dut1_to_tg_ip4o6} | ${tg_prefix4o6}
-| |       ... | ${dut2_node} | ${dut2_to_dut1}
-| |       ... | ${dut2_to_dut1_ip4o6} | ${dut_prefix4o6}
-| |       ... | ${dut2_node} | ${dut2_to_tg}
-| |       ... | ${dut2_to_tg_ip4o6} | ${tg_prefix4o6}
-| | And   VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4o6}
-| | And   VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4o6}
-| | And   Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4o6}
-| |       ... | ${tg_to_dut2_mac}
-| | And   Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4o6}
-| |       ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| |      ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| |      ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| |      ... | ${duts_locator_set} | ${dut1_ip4o6_eid} | ${dut2_ip4o6_eid}
-| |      ... | ${dut1_ip4o6_static_mapping} | ${dut2_ip4o6_static_mapping}
-| | Then Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg1_ip4o6} | ${tg2_ip4o6}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg2_ip4o6} | ${tg1_ip4o6}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC04: DUT1 and DUT2 route IPv6 bidirectionally over LISPoIPv4 tunnel
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv6-ICMPv6 on \
-| | ... | DUT1-DUT2, Eth-IPv6-ICMPv6 on TG-DUTn. [Cfg] On DUT1 and DUT2
-| | ... | configure IPv4 LISP remote static mappings. [Ver] Make TG send
-| | ... | ICMPv6 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And   Interfaces in 3-node path are up
-| | And   IP addresses are set on interfaces
-| |       ... | ${dut1_node} | ${dut1_to_dut2}
-| |       ... | ${dut1_to_dut2_ip6o4} | ${dut_prefix6o4}
-| |       ... | ${dut1_node} | ${dut1_to_tg}
-| |       ... | ${dut1_to_tg_ip6o4} | ${tg_prefix6o4}
-| |       ... | ${dut2_node} | ${dut2_to_dut1}
-| |       ... | ${dut2_to_dut1_ip6o4} | ${dut_prefix6o4}
-| |       ... | ${dut2_node} | ${dut2_to_tg}
-| |       ... | ${dut2_to_tg_ip6o4} | ${tg_prefix6o4}
-| | And   VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip6o4}
-| | And   VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip6o4}
-| | And   Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip6o4}
-| |       ... | ${tg_to_dut2_mac}
-| | And   Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip6o4}
-| |       ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| |      ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| |      ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| |      ... | ${duts_locator_set} | ${dut1_ip6o4_eid} | ${dut2_ip6o4_eid}
-| |      ... | ${dut1_ip6o4_static_mapping} | ${dut2_ip6o4_static_mapping}
-| | Then Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg1_ip6o4} | ${tg2_ip6o4}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg2_ip6o4} | ${tg1_ip6o4}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-
-| TC05: DUT1 and DUT2 route IPv4 over LISPoIPv4 tunnel after disable-enable
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG. [Enc] Eth-IPv4-LISP-IPv4-ICMPv4 on \
-| | ... | DUT1-DUT2, Eth-IPv4-ICMPv4 on TG-DUTn. [Cfg1] On DUT1 and DUT2
-| | ... | configure IPv4 LISP remote static mappings. [Ver1] Make TG send
-| | ... | ICMPv4 Echo Req between its interfaces across both DUTs and LISP
-| | ... | tunnel between them; verify IPv4 headers on received packets are
-| | ... | correct. [Cfg2] Disable LISP. [Ver2] verify packets are not
-| | ... | received via LISP tunnel. [Cfg3] Re-enable LISP. [Ver3] verify
-| | ... | packets are received again via LISP tunnel. [Ref] RFC6830.
-| | [Tags] | EXPECTED_FAILING
-| | Given Path for 3-node testing is set
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | And   Interfaces in 3-node path are up
-| | And   IP addresses are set on interfaces
-| |       ... | ${dut1_node} | ${dut1_to_dut2}
-| |       ... | ${dut1_to_dut2_ip4} | ${prefix4}
-| |       ... | ${dut1_node} | ${dut1_to_tg}
-| |       ... | ${dut1_to_tg_ip4} | ${prefix4}
-| |       ... | ${dut2_node} | ${dut2_to_dut1}
-| |       ... | ${dut2_to_dut1_ip4} | ${prefix4}
-| |       ... | ${dut2_node} | ${dut2_to_tg}
-| |       ... | ${dut2_to_tg_ip4} | ${prefix4}
-| | And   VPP IP Probe | ${dut1_node} | ${dut1_to_dut2} | ${dut2_to_dut1_ip4}
-| | And   VPP IP Probe | ${dut2_node} | ${dut2_to_dut1} | ${dut1_to_dut2_ip4}
-| | And   Add Arp On Dut | ${dut2_node} | ${dut2_to_tg} | ${tg2_ip4}
-| |       ... | ${tg_to_dut2_mac}
-| | And   Add Arp On Dut | ${dut1_node} | ${dut1_to_tg} | ${tg1_ip4}
-| |       ... | ${tg_to_dut1_mac}
-| | When Set up Lisp topology
-| |      ... | ${dut1_node} | ${dut1_to_dut2} | ${NONE}
-| |      ... | ${dut2_node} | ${dut2_to_dut1} | ${NONE}
-| |      ... | ${duts_locator_set} | ${dut1_ip4_eid} | ${dut2_ip4_eid}
-| |      ... | ${dut1_ip4_static_mapping} | ${dut2_ip4_static_mapping}
-| | Then Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | When Disable Lisp | ${dut1_node}
-| | Then Send packet from Port to Port should failed
-| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Send packet from Port to Port should failed
-| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
-| | When Enable Lisp | ${dut1_node}
-| | Then Wait Until Keyword Succeeds | 2x | 5s | Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg1_ip4} | ${tg2_ip4}
-| |      ... | ${tg_to_dut1} | ${tg_to_dut1_mac} | ${dut1_to_tg_mac}
-| |      ... | ${tg_to_dut2} | ${dut2_to_tg_mac} | ${tg_to_dut2_mac}
-| | And Wait Until Keyword Succeeds | 2x | 5s | Send Packet And Check Headers
-| |      ... | ${tg_node} | ${tg2_ip4} | ${tg1_ip4}
-| |      ... | ${tg_to_dut2} | ${tg_to_dut2_mac} | ${dut2_to_tg_mac}
-| |      ... | ${tg_to_dut1} | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}