diff options
author | 2016-05-03 15:45:09 +0200 | |
---|---|---|
committer | 2016-05-23 12:51:50 +0000 | |
commit | 74132d55d6f846a3356df188509accd7169f939b (patch) | |
tree | 00c811fadeea68e51bf7d13c135c96a3c84e1e2d /tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot | |
parent | e52235ebf45d01235faa4cfa7ea8598ce16290f2 (diff) |
Performance l2-vlan-dot1q library and short/long test cases
- JIRA: CSIT-59
- create topology with VLAN dot1q sub-interfaces inter-connected using
L2 cross connect in 3-node topology
- create keywords to be used in test cases
- create l2-vlan-dot1q test cases (64B, 1518B, 9000B)
Change-Id: Ic5f31b4451965bb7f5d3d5b7061c6600f63da898
Signed-off-by: pmikus <pmikus@cisco.com>
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot')
-rw-r--r-- | tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot new file mode 100644 index 0000000000..8eef6c8c56 --- /dev/null +++ b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot @@ -0,0 +1,270 @@ +# Copyright (c) 2016 Cisco and/or its affiliates. +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +*** Settings *** +| Resource | resources/libraries/robot/performance.robot +| Resource | resources/libraries/robot/tagging.robot +| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG +| ... | NIC_Intel-X520-DA2 +| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model +| ... | L2 | Intel-X520-DA2 +| Suite Teardown | 3-node Performance Suite Teardown +| Test Setup | Setup all DUTs before test +| Test Teardown | Run Keyword | Show statistics on all DUTs +| Documentation | *Throughput search suite (based on RFC2544).* +| ... +| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link +| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per +| ... | direction). Packets contain Ethernet header, IPv4 header, +| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are +| ... | matching MAC addresses of the TG node. DUT nodes are interconnected +| ... | with VLAN dot1q configured interfaces with VLAN 10. + +*** Variables *** +| ${subid}= | 10 +| ${tag_rewrite}= | pop-1 + +*** Test Cases *** +| Find NDR by using RFC2544 linear search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with non drop rate by using linear search starting +| | ... | at 4.2Mpps, stepping down with step of 0.1Mpps. Frames from and to TG +| | ... | are 64B long. Tagging is applied between DUTs inserting 4B VLAN ID +| | ... | into a packet header. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ${framesize}= | Set Variable | 64 +| | ${start_rate}= | Set Variable | 4200000 +| | ${step_rate}= | Set Variable | 100000 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | 14880952 +| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR by using RFC2544 linear search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with non drop rate by using linear search starting +| | ... | at 812,743pps, stepping down with step of 10,000pps. Frames from and +| | ... | to TG are 1518B long. Tagging is applied between DUTs inserting 4B +| | ... | VLAN ID into a packet header. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR by using RFC2544 linear search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput with non drop rate by using linear search starting +| | ... | at 138,580pps, stepping down with step of 5,000pps. Frames from and +| | ... | to TG are 9000B long. Tagging is applied between DUTs inserting 4B +| | ... | VLAN ID into a packet header. +| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate by using linear search +| | ... | starting at 7.8Mpps, stepping down with step of 0.1Mpps. Frames from +| | ... | and to TG are 64B long. Tagging is applied between DUTs inserting 4B +| | ... | VLAN ID into a packet header. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 64 +| | ${start_rate}= | Set Variable | 7800000 +| | ${step_rate}= | Set Variable | 100000 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | 14880952 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate by using linear search +| | ... | starting at 812,743pps, stepping down with step of 10,000pps. Frames +| | ... | from and to TG are 1518B long. Tagging is applied between DUTs +| | ... | inserting 4B VLAN ID into a packet header. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 2 cores and rss 1 by using RFC2544 linear search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 2 cores with non drop rate by using linear search +| | ... | starting at 138,580pps, stepping down with step of 5,000pps. Frames +| | ... | from and to TG are 9000B long. Tagging is applied between DUTs +| | ... | inserting 4B VLAN ID into a packet header. +| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate by using +| | ... | linear search starting at 12Mpps, stepping down with step of 0.1Mpps. +| | ... | Frames from and to TG are 64B long. Tagging is applied between DUTs +| | ... | inserting 4B VLAN ID into a packet header. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 64 +| | ${start_rate}= | Set Variable | 12000000 +| | ${step_rate}= | Set Variable | 100000 +| | ${min_rate}= | Set Variable | 100000 +| | ${max_rate}= | Set Variable | 14880952 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate by using +| | ... | linear search starting at 812,743pps, stepping down with step of +| | ... | 10,000pps. Frames from and to TG are 1518B long. Tagging is applied +| | ... | between DUTs inserting 4B VLAN ID into a packet header. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 1518 +| | ${start_rate}= | Set Variable | 812743 +| | ${step_rate}= | Set Variable | 10000 +| | ${min_rate}= | Set Variable | 10000 +| | ${max_rate}= | Set Variable | 812743 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} + +| Find NDR with 4 cores and rss 2 by using RFC2544 linear search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| | [Documentation] +| | ... | Find throughput on 4 cores and rss 2 with non drop rate by using +| | ... | linear search starting at 138,580pps, stepping down with step of +| | ... | 5,000pps. Frames from and to TG are 9000B long. Tagging is applied +| | ... | between DUTs inserting 4B VLAN ID into a packet header. +| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD +| | ${framesize}= | Set Variable | 9000 +| | ${start_rate}= | Set Variable | 138580 +| | ${step_rate}= | Set Variable | 5000 +| | ${min_rate}= | Set Variable | 5000 +| | ${max_rate}= | Set Variable | 138580 +| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs +| | And VPP interfaces in path are up +| | When VLAN dot1q subinterfaces initialized on 3-node topology +| | ... | ${dut1} | ${dut1_if2} | ${dut2} | ${dut2_if1} | ${subid} +| | And L2 tag rewrite method setup on interfaces +| | ... | ${dut1} | ${subif_index_1} | ${dut2} | ${subif_index_2} +| | ... | ${tag_rewrite} +| | And Interfaces and VLAN sub-interfaces inter-connected using L2-xconnect +| | ... | ${dut1} | ${dut1_if1} | ${subif_index_1} +| | ... | ${dut2} | ${dut2_if2} | ${subif_index_2} +| | Then Find NDR using linear search and pps | ${framesize} | ${start_rate} +| | ... | ${step_rate} | 3-node-xconnect +| | ... | ${min_rate} | ${max_rate} |