diff options
author | 2016-07-22 09:34:25 +0200 | |
---|---|---|
committer | 2016-07-22 13:32:53 +0200 | |
commit | 70cbaaee0e6210682ce6d278ea645b8bea153b67 (patch) | |
tree | 9d82a1df0276cfb854d9fc8d5d1888b360fe9234 /tests/suites/performance/Short_IPv4_iAcl_Intel-X520-DA2.robot | |
parent | 7c3e0cc41f55327d6eeb04fe757c6e80064ab28a (diff) |
CSIT-220: Rename directories in tests directory
- Move performance directory one level up and rename it to “perf”
- Rename “suites” directory to “func”
- Create __init__.py in “perf” directory
- Rename fds_related_tests to fds
Change-Id: I59f06afe1c5b95dd8a48417b8fbfd1fca8797097
Signed-off-by: Matej Klotton <mklotton@cisco.com>
Diffstat (limited to 'tests/suites/performance/Short_IPv4_iAcl_Intel-X520-DA2.robot')
-rw-r--r-- | tests/suites/performance/Short_IPv4_iAcl_Intel-X520-DA2.robot | 323 |
1 files changed, 0 insertions, 323 deletions
diff --git a/tests/suites/performance/Short_IPv4_iAcl_Intel-X520-DA2.robot b/tests/suites/performance/Short_IPv4_iAcl_Intel-X520-DA2.robot deleted file mode 100644 index ea4a0871d1..0000000000 --- a/tests/suites/performance/Short_IPv4_iAcl_Intel-X520-DA2.robot +++ /dev/null @@ -1,323 +0,0 @@ -# Copyright (c) 2016 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/performance.robot -| Library | resources.libraries.python.Classify.Classify -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT1']} | WITH NAME | dut1_v4 -| Library | resources.libraries.python.IPv4Setup.Dut | ${nodes['DUT2']} | WITH NAME | dut2_v4 -| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT -| ... | NIC_Intel-X520-DA2 -| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model -| ... | L3 | Intel-X520-DA2 -| Suite Teardown | 3-node Performance Suite Teardown -| Test Setup | Setup all DUTs before test -| Test Teardown | Run Keywords | Remove startup configuration of VPP from all DUTs -| ... | AND | Show vpp trace dump on all DUTs -| Documentation | *Reference NDR throughput IPv4 whitelist verify test cases* -| ... -| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. -| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 -| ... | routing, two static IPv4 /24 routes and IPv4 iAcl security whitelist -| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. -| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. -| ... | *[Ver] TG verification:* In short performance tests, TG verifies -| ... | DUTs' throughput at ref-NDR (reference Non Drop Rate) with zero packet -| ... | loss tolerance. Ref-NDR value is periodically updated acording to -| ... | formula: ref-NDR = 0.9x NDR, where NDR is found in RFC2544 long -| ... | performance tests for the same DUT configuration. Test packets are -| ... | generated by TG on links to DUTs. TG traffic profile contains two L3 -| ... | flow-groups (flow-group per direction, 253 flows per flow-group) with -| ... | all packets containing Ethernet header, IPv4 header with IP protocol=61 -| ... | and generated payload. MAC addresses are matching MAC addresses of the -| ... | TG node interfaces. -| ... | *[Ref] Applicable standard specifications:* RFC2544. - -*** Test Cases *** -| TC01: Verify 64B ref-NDR at 2x 3.1Mpps - DUT IPv4 iAcl whitelist - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 3.1mpps -| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 - -| TC02: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 iAcl whitelist - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 812743pps -| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 - -| TC03: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 iAcl whitelist - 1thread 1core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test. -| | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 138580pps -| | Given Add '1' worker threads and rxqueues '1' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 - -| TC04: Verify 64B ref-NDR at 2x 5.8Mpps - DUT IPv4 iAcl whitelist - 2thread 2core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 5.8mpps -| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 - -| TC05: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 iAcl whitelist - 2thread 2core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 812743pps -| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 - -| TC06: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 iAcl whitelist - 2thread 2core 1rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test. -| | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 138580pps -| | Given Add '2' worker threads and rxqueues '1' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 - -| TC07: Verify 64B ref-NDR at 2x 7.8Mpps - DUT IPv4 iAcl whitelist - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 64 Byte frames using single trial throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 64 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 7.8mpps -| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | And IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 - -| TC08: Verify 1518B ref-NDR at 2x 812.74kpps - DUT IPv4 iAcl whitelist - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 1518 Byte frames using single trial throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 1518 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 812743pps -| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Add No Multi Seg to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 - -| TC09: Verify 9000B ref-NDR at 2x 138.58kpps - DUT IPv4 iAcl whitelist - 4threads 4cores 2rxq -| | [Documentation] -| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ -| | ... | 4 thread, 4 phy core, 2 receive queue per NIC port. [Ver] Verify -| | ... | ref-NDR for 9000 Byte frames using single trial throughput test. -| | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR -| | ${framesize}= | Set Variable | 9000 -| | ${duration}= | Set Variable | 10 -| | ${rate}= | Set Variable | 138580pps -| | Given Add '4' worker threads and rxqueues '2' without HTT to all DUTs -| | And Add all PCI devices to all DUTs -| | And Apply startup configuration on all VPP DUTs -| | When IPv4 forwarding initialized in a 3-node circular topology -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut1} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut1} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 20.20.20.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut1} | ${dut1_if1} | ip4 | ${table_idx} -| | ${table_idx} | ${skip_n} | ${match_n}= | And Vpp Creates Classify Table L3 -| | ... | ${dut2} | ip4 | dst -| | And Vpp Configures Classify Session L3 -| | ... | ${dut2} | permit | ${table_idx} | ${skip_n} | ${match_n} -| | ... | ip4 | dst | 10.10.10.2 -| | And Vpp Enable Input Acl Interface -| | ... | ${dut2} | ${dut2_if2} | ip4 | ${table_idx} -| | Then Traffic should pass with no loss | ${duration} | ${rate} -| | ... | ${framesize} | 3-node-IPv4 |