Extend host topology with NIC type filtering

JIRA: CSIT-1
Changes to allow filtering based on NIC model.
Switched xconnect perf test to use filtered topology.

Change-Id: Id526f47dc28f92bf26d070e54819ad29bccc0440
Signed-off-by: Miroslav Miklus <mmiklus@cisco.com>

1 files changed, 0 insertions, 141 deletions

diff --git a/tests/suites/performance/short_xconnect.robot b/tests/suites/performance/short_xconnect.robot
deleted file mode 100644
index 25eef3f65c..0000000000
--- a/tests/suites/performance/short_xconnect.robot
+++ /dev/null
@@ -1,141 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*** Settings ***
-| Resource | resources/libraries/robot/performance.robot
-| Library | resources.libraries.python.InterfaceUtil
-| Library | resources.libraries.python.NodePath
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT
-| Suite Setup | 3-node Performance Suite Setup | L2
-| Suite Teardown | 3-node Performance Suite Teardown
-| Test Setup | Setup all DUTs before test
-| Test Teardown | Run Keywords | Show statistics on all DUTs
-| ...           | AND          | Reset startup configuration of VPP on all DUTs
-| Documentation | Minimal throughput acceptance test cases
-
-*** Test Cases ***
-| 1core VPP passes 64B frames through L2 cross connect at 2x 3.8Mpps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 1 core should pass 64B frames through L2 cross connect
-| | ... | at 2x3.8Mpps in 3-node topology
-| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
-| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 3.8mpps
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
-
-| 1core VPP passes 1518B frames through L2 cross connect at 2x 10Gbps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 1 core should pass 1518B frames through L2 cross connect
-| | ... | at 2x10Gbps in 3-node topology
-| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 10gbps
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
-
-| 1core VPP passes 9000B frames through L2 cross connect at 2x 10Gbps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 1 core should pass 9000B frames through L2 cross connect
-| | ... | at 2x10Gbps in 3-node topology
-| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 10gbps
-| | Given Setup '1' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
-
-| 2core VPP with rss 1 passes 64B frames through L2 cross connect at 2x 8.3Mpps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 2 cores should pass 64B frames through L2 cross connect
-| | ... | at 2x8.3Mpps in 3-node topology
-| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 8.3mpps
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
-
-| 2core VPP with rss 1 passes 1518B frames through L2 cross connect at 2x 10Gbps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 2 cores should pass 1518B frames through L2 cross connect
-| | ... | at 2x10Gbps in 3-node topology
-| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 10gbps
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
-
-| 2core VPP with rss 1 passes 9000B frames through L2 cross connect at 2x 10Gbps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 2 cores should pass 9000B frames through L2 cross connect
-| | ... | at 2x10Gbps in 3-node topology
-| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 10gbps
-| | Given Setup '2' worker threads and rss '1' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
-
-| 4core VPP with rss 2 passes 64B frames through L2 cross connect at 2x 9.9Mpps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 4 cores and rss 2 should pass 64B frames through L2 cross
-| | ... | connect at 2x9.9Mpps in 3-node topology
-| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 64
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 9.9mpps
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
-
-| 4core VPP with rss 2 passes 1518B frames through L2 cross connect at 2x 10Gbps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 4 cores and rss 2 should pass 1518B frames through L2 cross
-| | ... | connect at 2x10Gbps in 3-node topology
-| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 1518
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 10gbps
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect
-
-| 4core VPP with rss 2 passes 9000B frames through L2 cross connect at 2x 10Gbps in 3-node topology
-| | [Documentation]
-| | ... | VPP with 4 cores and rss 2 should pass 9000B frames through L2 cross
-| | ... | connect at 2x10Gbps in 3-node topology
-| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD
-| | ${framesize}= | Set Variable | 9000
-| | ${duration}= | Set Variable | 10
-| | ${rate}= | Set Variable | 10gbps
-| | Given Setup '4' worker threads and rss '2' without HTT on all DUTs
-| | AND   L2 xconnect initialized in a 3-node circular topology
-| | Then Traffic should pass with no loss | ${duration} | ${rate}
-| | ...                                   | ${framesize} | 3-node-xconnect