aboutsummaryrefslogtreecommitdiffstats
path: root/tests/suites
diff options
context:
space:
mode:
authorPeter Mikus <pmikus@cisco.com>2016-05-25 15:51:32 +0200
committerDave Wallace <dwallacelf@gmail.com>2016-06-02 17:13:20 +0000
commit55b4465a5c7ab8d8b340d67f1e11ba06a3ce39ea (patch)
treea4bf724e0b6fba36e96f3cb8f83e07f6df753230 /tests/suites
parent4aaf57b2317e0f3e8dcc2f313a6503ea72e89e41 (diff)
IPv6 COP - performance
- JIRA: CSIT-109 - create topology with COP white-list applied on interfaces using IPv6 in 3-node topology - create necessary keywords to be used in test cases - create ipv6_cop test cases (78B, 1518B, 9000B) Change-Id: I2618971610f066b847c00e1ea18dc396555a9923 Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'tests/suites')
-rw-r--r--tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot541
-rw-r--r--tests/suites/performance/Short_IPv6_Cop_Intel-X520-DA2.robot220
2 files changed, 761 insertions, 0 deletions
diff --git a/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
new file mode 100644
index 0000000000..e49566d7df
--- /dev/null
+++ b/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot
@@ -0,0 +1,541 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance.robot
+| Library | resources.libraries.python.Cop
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_LONG
+| ... | NIC_Intel-X520-DA2
+| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | 3-node Performance Suite Teardown
+| Test Setup | Setup all DUTs before test
+| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| Documentation | *Throughput search suite (based on RFC2544).*
+| ...
+| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link
+| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per
+| ... | direction). Packets contain Ethernet header, IPv6 header, and random
+| ... | payload. Ethernet header MAC addresses are matching MAC addresses
+| ... | of the TG node. COP (whitelist) is applied on link between TG - DUT1
+| ... | and DUT2 - TG. Additional ipv6 fib table with index 1 is created and
+| ... | single entry added to permit all the traffic (subnet /64).
+
+*** Test Cases ***
+| Find NDR by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 78B frames by using
+| | ... | binary search with threshold 0.1Mpps.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with partial drop rate for 78B frames by using
+| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5
+| | ... | percent of transmitted packets.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 1518B frames by using
+| | ... | binary search with threshold 10,000pps.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with partial drop rate for 1518B frames by using
+| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5
+| | ... | percent of transmitted packets.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with non drop rate for 9000B frames by using
+| | ... | binary search with threshold 5,000pps.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput with partial drop rate for 9000B frames by using
+| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to
+| | ... | 0.5 percent of transmitted packets.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | PDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 78B frames by using
+| | ... | binary search with threshold 0.1Mpps.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with partial drop rate for 78B frames by
+| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
+| | ... | to 0.5 percent of transmitted packets.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by
+| | ... | using binary search with threshold 10,000pps.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by
+| | ... | using binary search with threshold 10,000pps. Loss acceptance is set
+| | ... | to 0.5 percent of transmitted packets.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by
+| | ... | using binary search with threshold 5,000pps.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 2 cores and rss 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by
+| | ... | using binary search with threshold 5,000pps. Loss acceptance is set
+| | ... | to 0.5 percent of transmitted packets.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 78B
+| | ... | frames by using binary search with threshold 0.1Mpps.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 78B
+| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance
+| | ... | is set to 0.5 percent of transmitted packets.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 78
+| | ${min_rate}= | Set Variable | 100000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_78B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 1518B
+| | ... | frames by using binary search with threshold 10,000pps.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 1518B
+| | ... | frames by using binary search with threshold 10,000pps. Loss
+| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 1518
+| | ${min_rate}= | Set Variable | 10000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_1518B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
+
+| Find NDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with non drop rate for 9000B
+| | ... | frames by using binary search starting at 138,580pps, stepping down
+| | ... | with step of 5,000pps.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find NDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+
+| Find PDR with 4 cores and rss 2 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology
+| | [Documentation]
+| | ... | Find throughput on 4 cores and rss 2 with partial drop rate for 9000B
+| | ... | frames by using binary search with threshold 5,000pps. Loss
+| | ... | acceptance is set to 0.5 percent of transmitted packets.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | PDR
+| | ${framesize}= | Set Variable | 9000
+| | ${min_rate}= | Set Variable | 5000
+| | ${max_rate}= | Set Variable | ${10Ge_linerate_pps_9000B}
+| | ${binary_min}= | Set Variable | ${min_rate}
+| | ${binary_max}= | Set Variable | ${max_rate}
+| | ${threshold}= | Set Variable | ${min_rate}
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Find PDR using binary search and pps | ${framesize} | ${binary_min}
+| | ... | ${binary_max} | 3-node-IPv6
+| | ... | ${min_rate} | ${max_rate}
+| | ... | ${threshold}
+| | ... | ${glob_loss_acceptance}
+| | ... | ${glob_loss_acceptance_type}
diff --git a/tests/suites/performance/Short_IPv6_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Short_IPv6_Cop_Intel-X520-DA2.robot
new file mode 100644
index 0000000000..aed7c95fd4
--- /dev/null
+++ b/tests/suites/performance/Short_IPv6_Cop_Intel-X520-DA2.robot
@@ -0,0 +1,220 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/performance.robot
+| Library | resources.libraries.python.Cop
+| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | PERFTEST_SHORT
+| ... | NIC_Intel-X520-DA2
+| Suite Setup | 3-node Performance Suite Setup with DUT's NIC model
+| ... | L3 | Intel-X520-DA2
+| Suite Teardown | 3-node Performance Suite Teardown
+| Test Setup | Setup all DUTs before test
+| Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs
+| Documentation | Minimal throughput acceptance test cases
+
+*** Test Cases ***
+| 1core VPP passes 78B frames through IPv6 forwarding with COP at 2x 2.9Mpps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 1 core should pass 78B frames through IPv6 forwarding
+| | ... | at 2x 2.9Mpps in 3-node topology with COP.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 2.9mpps
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| 1core VPP passes 1518B frames through IPv6 forwarding with COP at 2x 812,743pps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 1 core should pass 1518B frames through IPv6 forwarding
+| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| 1core VPP passes 9000B frames through IPv6 forwarding with COP at 2x 138,580pps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 1 core should pass 9000B frames through IPv6 forwarding
+| | ... | at 2x138,580pps (2x 10Gbps) in 3-node topology with COP.
+| | [Tags] | 1_THREAD_NOHTT_RSS_1 | SINGLE_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '1' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| 2core VPP with rss 1 passes 78B frames through IPv6 forwarding with COP at 2x 4.9Mpps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 2 cores should pass 78B frames through IPv6 forwarding
+| | ... | at 2x 4.9Mpps in 3-node topology with COP.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 4.9mpps
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| 2core VPP with rss 1 passes 1518B frames through IPv6 forwarding with COP at 2x 812,743pps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 2 cores should pass 1518B frames through IPv6 forwarding
+| | ... | at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| 2core VPP with rss 1 passes 9000B frames through IPv6 forwarding with COP at 2x 138,580pps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 2 cores should pass 9000B frames through IPv6 forwarding
+| | ... | at 2x 138,580pps (2x 10Gbps) in 3-node topology with COP.
+| | [Tags] | 2_THREAD_NOHTT_RSS_1 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '2' worker threads and rss '1' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| 4core VPP with rss 2 passes 78B frames through IPv6 forwarding with COP at 2x 10.1Mpps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 4 cores and rss 2 should pass 78B frames through IPv6
+| | ... | forwarding at 2x 10.1Mpps in 3-node topology with COP.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 78
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 10.1mpps
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| 4core VPP with rss 2 passes 1518B frames through IPv6 forwarding with COP at 2x 812,743pps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 4 cores and rss 2 should pass 1518B frames through IPv6
+| | ... | forwarding at 2x 812,743pps (2x 10Gbps) in 3-node topology with COP.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 1518
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 812743pps
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Add No Multi Seg to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6
+
+| 4core VPP with rss 2 passes 9000B frames through IPv6 forwarding with COP at 2x 138,580pps in 3-node topology
+| | [Documentation]
+| | ... | VPP with 4 cores and rss 2 should pass 9000B frames through IPv6
+| | ... | forwarding at 2x 138,580pps (2x 10Gbps) in 3-node topology with COP.
+| | [Tags] | 4_THREAD_NOHTT_RSS_2 | MULTI_THREAD | NDR
+| | ${framesize}= | Set Variable | 9000
+| | ${duration}= | Set Variable | 10
+| | ${rate}= | Set Variable | 138580pps
+| | Given Add '4' worker threads and rss '2' without HTT to all DUTs
+| | And Add all PCI devices to all DUTs
+| | And Apply startup configuration on all VPP DUTs
+| | When IPv6 forwarding initialized in a 3-node circular topology
+| | And Add fib table | ${dut1} | 2001:1:: | 64 | 1 | local
+| | And Add fib table | ${dut2} | 2001:2:: | 64 | 1 | local
+| | And COP Add whitelist Entry | ${dut1} | ${dut1_if1} | ip6 | 1
+| | And COP Add whitelist Entry | ${dut2} | ${dut2_if2} | ip6 | 1
+| | And COP interface enable or disable | ${dut1} | ${dut1_if1} | enable
+| | And COP interface enable or disable | ${dut2} | ${dut2_if2} | enable
+| | Then Traffic should pass with no loss | ${duration} | ${rate}
+| | ... | ${framesize} | 3-node-IPv6