aboutsummaryrefslogtreecommitdiffstats
path: root/tests/suites
diff options
context:
space:
mode:
authorTibor Frank <tifrank@cisco.com>2016-06-06 11:01:03 +0200
committerTibor Frank <tifrank@cisco.com>2016-06-08 08:11:29 +0000
commite8c787b699661f00e8358cc711bb20b8993dc87a (patch)
tree244d86b3844fdf8a559be5fc4969065b7a3bc22c /tests/suites
parent3744273d8f1540fe45312b5c3a4e2e6f8b21a81f (diff)
Add Tests for Honeycomb VxLAN GPE support
JIRA: CSIT-131 - add tests for Honeycomb VxLAN GPE support - add keywords needed for tests Change-Id: I460ecd30835bb95140958b20946b1d41ac6d9abc Signed-off-by: Tibor Frank <tifrank@cisco.com>
Diffstat (limited to 'tests/suites')
-rw-r--r--tests/suites/honeycomb/8 - vxlan_gpe.robot175
-rw-r--r--tests/suites/honeycomb/resources/vxlan_gpe.py99
2 files changed, 274 insertions, 0 deletions
diff --git a/tests/suites/honeycomb/8 - vxlan_gpe.robot b/tests/suites/honeycomb/8 - vxlan_gpe.robot
new file mode 100644
index 0000000000..43d6b4bc04
--- /dev/null
+++ b/tests/suites/honeycomb/8 - vxlan_gpe.robot
@@ -0,0 +1,175 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Node and interfaces to run tests on.
+| ${node}= | ${nodes['DUT1']}
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+# Parameters to be set on existing interface
+| ${vxlan_gpe_existing_if}= | ${interface}
+| &{vxlan_gpe_base_wrong_interface_settings}=
+| ... | name=${vxlan_gpe_existing_if}
+| ... | type=iana-if-type:ethernetCsmacd
+| ... | description=for testing purposes
+| ... | enabled=true
+| ... | link-up-down-trap-enable=enabled
+| &{vxlan_gpe_wrong_interface_settings}=
+| ... | local=192.168.50.77
+| ... | remote=192.168.50.72
+| ... | vni=${9}
+| ... | next-protocol=wrong_ipv4
+| ... | encap-vrf-id=${0}
+| ... | decap-vrf-id=${0}
+
+*** Settings ***
+| Resource | resources/libraries/robot/default.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot
+# Import additional VxLAN GPE settings from resource file
+| Variables | tests/suites/honeycomb/resources/vxlan_gpe.py
+| Documentation | *Honeycomb VxLAN-GPE management test suite.*
+| Force Tags | honeycomb_sanity
+
+*** Test Cases ***
+| Honeycomb creates VxLAN GPE tunnel
+| | [Documentation] | Check if Honeycomb API can configure VxLAN GPE tunnel.
+| | ...
+| | Given interface configuration from Honeycomb should be empty
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | And interface configuration from VAT should be empty
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | When Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
+| | Then run keyword and continue on failure
+| | ... | VxLAN GPE configuration from Honeycomb should be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
+| | And run keyword and continue on failure
+| | ... | VxLAN GPE configuration from VAT should be
+| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
+| | And run keyword and continue on failure
+| | ... | Interface indices should be the same from Honeycomb and VAT
+| | ... | ${node} | ${vxlan_gpe_if1}
+
+| Honeycomb removes VxLAN GPE tunnel
+| | [Documentation] | Check if Honeycomb API can remove VxLAN GPE tunnel.
+| | ...
+# Disabled beacuse of bug in Honeycomb.
+# TODO: Enable when fixed.
+#| | Given VxLAN GPE configuration from Honeycomb should be
+#| | ... | ${node} | ${vxlan_gpe_if1}
+#| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
+#| | And VxLAN GPE configuration from VAT should be
+#| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
+| | When Honeycomb removes VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | Then VxLAN GPE configuration from VAT should be empty
+| | ... | ${node}
+| | And VxLAN GPE configuration from Honeycomb should be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_disabled_base_settings} | ${vxlan_gpe_settings}
+
+| Honeycomb sets wrong interface type while creating VxLAN GPE tunnel
+| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
+| | ... | with a wrong interface type set.
+| | ...
+| | Given interface configuration from Honeycomb should be empty
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | And interface configuration from VAT should be empty
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | When Honeycomb fails to create VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | ... | ${vxlan_gpe_wrong_type_base_settings} | ${vxlan_gpe_settings}
+| | Then interface configuration from Honeycomb should be empty
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | And interface configuration from VAT should be empty
+| | ... | ${node} | ${vxlan_gpe_if2}
+
+| Honeycomb sets wrong protocol while creating VxLAN GPE tunnel
+| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
+| | ... | with a wrong next-protocol set.
+| | ...
+| | Given interface configuration from Honeycomb should be empty
+| | ... | ${node} | ${vxlan_gpe_if3}
+| | And interface configuration from VAT should be empty
+| | ... | ${node} | ${vxlan_gpe_if3}
+| | When Honeycomb fails to create VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if3}
+| | ... | ${vxlan_gpe_wrong_protocol_base_settings}
+| | ... | ${vxlan_gpe_wrong_protocol_settings}
+| | Then interface configuration from Honeycomb should be empty
+| | ... | ${node} | ${vxlan_gpe_if3}
+| | And interface configuration from VAT should be empty
+| | ... | ${node} | ${vxlan_gpe_if3}
+
+| Honeycomb sets VxLAN GPE tunnel on existing interface with wrong type
+| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
+| | ... | on existing interface with wrong type.
+| | ...
+| | Given VxLAN GPE configuration from VAT should be empty
+| | ... | ${node}
+| | When Honeycomb fails to create VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_existing_if}
+| | ... | ${vxlan_gpe_base_wrong_interface_settings}
+| | ... | ${vxlan_gpe_wrong_interface_settings}
+| | Then VxLAN GPE configuration from VAT should be empty
+| | ... | ${node}
+
+| Honeycomb creates VxLAN GPE tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure VxLAN GPE tunnel\
+| | ... | with IPv6 addresses.
+| | ...
+| | Given VxLAN GPE configuration from VAT should be empty
+| | ... | ${node}
+# Disabled beacuse of bug in Honeycomb
+# TODO: Enable when fixed.
+#| | And VxLAN GPE configuration from Honeycomb should be
+#| | ... | ${node} | ${vxlan_gpe_if5}
+#| | ... | ${vxlan_gpe_disabled_base_settings} | ${vxlan_gpe_settings}
+| | When Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if5}
+| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
+| | Then run keyword and continue on failure
+| | ... | VxLAN GPE configuration from Honeycomb should be
+| | ... | ${node} | ${vxlan_gpe_if5}
+| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
+| | And run keyword and continue on failure
+| | ... | VxLAN GPE configuration from VAT should be
+| | ... | ${node} | ${vxlan_gpe_if5} | ${vxlan_gpe_ipv6_settings}
+| | And run keyword and continue on failure
+| | ... | Interface indices should be the same from Honeycomb and VAT
+| | ... | ${node} | ${vxlan_gpe_if5}
+
+| Honeycomb creates the second VxLAN GPE tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure another one VxLAN\
+| | ... | GPE tunnel with IPv6 addresses.
+| | ...
+| | Given interface configuration from Honeycomb should be empty
+| | ... | ${node} | ${vxlan_gpe_if6}
+| | And interface configuration from VAT should be empty
+| | ... | ${node} | ${vxlan_gpe_if6}
+| | When Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if6}
+| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
+| | Then run keyword and continue on failure
+| | ... | VxLAN GPE configuration from Honeycomb should be
+| | ... | ${node} | ${vxlan_gpe_if6}
+| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
+| | And run keyword and continue on failure
+| | ... | VxLAN GPE configuration from VAT should be
+| | ... | ${node} | ${vxlan_gpe_if6} | ${vxlan_gpe_ipv6_settings2}
+| | And run keyword and continue on failure
+| | ... | Interface indices should be the same from Honeycomb and VAT
+| | ... | ${node} | ${vxlan_gpe_if6}
diff --git a/tests/suites/honeycomb/resources/vxlan_gpe.py b/tests/suites/honeycomb/resources/vxlan_gpe.py
new file mode 100644
index 0000000000..7f219f93b6
--- /dev/null
+++ b/tests/suites/honeycomb/resources/vxlan_gpe.py
@@ -0,0 +1,99 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+"""Test variables for Honeycomb VxLAN GPE management test suite."""
+
+# The first VxLAN GPE Interface used in tests.
+vxlan_gpe_if1 = 'vxlan_gpe_tunnel0'
+vxlan_gpe_base_settings = {
+ 'name': vxlan_gpe_if1,
+ 'description': 'for testing purposes',
+ 'enabled': True,
+ 'link-up-down-trap-enable': 'enabled'
+}
+vxlan_gpe_settings = {
+ 'local': '192.168.50.76',
+ 'remote': '192.168.50.71',
+ 'vni': 9,
+ 'next-protocol': 'ipv4',
+ 'encap-vrf-id': 0,
+ 'decap-vrf-id': 0
+}
+
+# The values of parameters of disabled VxLAN GPE interface.
+vxlan_gpe_disabled_base_settings = {
+ 'name': vxlan_gpe_if1,
+ 'description': 'for testing purposes',
+ 'enabled': 'false'
+}
+
+# Wrong interface type.
+vxlan_gpe_if2 = 'vxlan_gpe_tunnel1'
+vxlan_gpe_wrong_type_base_settings = {
+ 'name': vxlan_gpe_if2,
+ 'type': 'iana-if-type:ethernetCsmacd',
+ 'description': 'for testing purposes',
+ 'enabled': 'true',
+ 'link-up-down-trap-enable': 'enabled'
+}
+
+# Wrong next-protocol value.
+vxlan_gpe_if3 = 'vxlan_gpe_tunnel1'
+vxlan_gpe_wrong_protocol_base_settings = {
+ 'name': vxlan_gpe_if3,
+ 'description': 'for testing purposes',
+ 'enabled': 'true',
+ 'link-up-down-trap-enable': 'enabled'
+}
+vxlan_gpe_wrong_protocol_settings = {
+ 'local': '192.168.50.77',
+ 'remote': '192.168.50.72',
+ 'vni': 9,
+ 'next-protocol': 'wrong_ipv4',
+ 'encap-vrf-id': 0,
+ 'decap-vrf-id': 0
+}
+
+# The first IPv6 VxLAN GPE interface.
+vxlan_gpe_if5 = 'vxlan_gpe_tunnel0'
+vxlan_gpe_base_ipv6_settings = {
+ 'name': vxlan_gpe_if5,
+ 'description': 'for testing purposes',
+ 'enabled': 'true',
+ 'link-up-down-trap-enable': 'enabled'
+}
+vxlan_gpe_ipv6_settings = {
+ 'local': '10:10:10:10:10:10:10:10',
+ 'remote': '10:10:10:10:10:10:10:11',
+ 'vni': 9,
+ 'next-protocol':'ipv4',
+ 'encap-vrf-id': 0,
+ 'decap-vrf-id': 0
+}
+
+# The second IPv6 VxLAN GPE interface.
+vxlan_gpe_if6 = 'vxlan_gpe_tunnel1'
+vxlan_gpe_base_ipv6_settings2 = {
+ 'name': vxlan_gpe_if6,
+ 'description': 'for testing purposes',
+ 'enabled': 'true',
+ 'link-up-down-trap-enable': 'enabled'
+}
+vxlan_gpe_ipv6_settings2 = {
+ 'local': '10:10:10:10:10:10:10:20',
+ 'remote': '10:10:10:10:10:10:10:21',
+ 'vni': 9,
+ 'next-protocol': 'ipv4',
+ 'encap-vrf-id': 0,
+ 'decap-vrf-id': 0
+}