diff options
| author |   Maciek Konstantynowicz <mkonstan@cisco.com> | 2016-06-16 13:04:53 +0100 |
|---|---|---|
| committer |   Miroslav Miklus <mmiklus@cisco.com> | 2016-06-22 08:50:49 +0000 |
| commit | 49e919071acc924f93baeea63537e88ffa79fa8e (patch) | |
| tree | ea5370ee04fad7f8ee5df57ab2f7f492492c42a4 /tests/suites | |
| parent | d9fe5a5323e5f904d461266d55dc8ee3857e6555 (diff) | |
Suite: performance.
Files: Long_IPv4_Intel-X520-DA2.robot, Long_IPv4_Cop_Intel-X520-DA2.robot,
Long_Bridge_Domain_Intel-X520-DA2.robot,
Long_Xconnect_Intel-X520-DA2.robot, Long_Xconnect_Dot1q_Intel-X520-DA2.robot,
Long_IPv6_Intel-X520-DA2.robot, Long_IPv6_Cop_Intel-X520-DA2.robot.
Updated test cases names and test cases documentation.
Change-Id: I83262881a4b56512975c8ecc4518ddd2d7ec54b3
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Diffstat (limited to 'tests/suites')
7 files changed, 679 insertions, 518 deletions
diff --git a/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot b/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot index 3a3db169ee..106a7a7d17 100644 --- a/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_Bridge_Domain_Intel-X520-DA2.robot @@ -21,19 +21,34 @@ | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs -| Documentation | *Throughput search suite (based on RFC2544).* +| Documentation | *RFC2544: Pkt throughput L2BD test cases* | ... -| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link -| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per -| ... | direction). Packets contain Ethernet header, IPv4 header, -| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are -| ... | matching MAC addresses of the TG node. +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 bridge- +| ... | domain and MAC learning enabled. DUT1 and DUT2 tested with 2p10GE NIC +| ... | X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Test Cases *** -| Find NDR by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| TC01: 64B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -51,11 +66,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| TC02: 64B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -75,10 +90,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| TC03: 1518B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -96,11 +112,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| TC04: 1518B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -120,10 +136,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| TC05: 9000B NDR binary search - DUT L2BD - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 9000B frames by using -| | ... | binary search with threshold of 5,000pps. +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -140,11 +157,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| TC06: 9000B PDR binary search - DUT L2BD - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 9000B frames by using -| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -163,10 +180,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| TC07: 64B NDR binary search - DUT L2BD - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -184,11 +202,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| TC08: 64B PDR binary search - DUT L2BD - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by -| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -208,10 +226,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| TC09: 1518B NDR binary search - DUT L2BD - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -229,11 +248,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| TC10: 1518B PDR binary search - DUT L2BD - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -253,10 +272,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| TC11: 9000B NDR binary search - DUT L2BD - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -273,11 +293,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| TC12: 9000B PDR binary search - DUT L2BD - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -296,10 +316,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| TC13: 64B NDR binary search - DUT L2BD - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -317,11 +338,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through bridge domain in 3-node topology +| TC14: 64B PDR binary search - DUT L2BD - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance -| | ... | is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -341,11 +362,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} - -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| TC15: 1518B NDR binary search - DUT L2BD - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -363,11 +384,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through bridge domain in 3-node topology +| TC16: 1518B PDR binary search - DUT L2BD - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -387,10 +408,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| TC17: 9000B NDR binary search - DUT L2BD - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -407,11 +429,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through bridge domain in 3-node topology +| TC18: 9000B PDR binary search - DUT L2BD - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2BD switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 diff --git a/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot index ca43e610d2..47a22fd686 100644 --- a/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_IPv4_Cop_Intel-X520-DA2.robot @@ -23,22 +23,36 @@ | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs -| Documentation | *Throughput search suite (based on RFC2544).* +| Documentation | *RFC2544: Pkt throughput IPv4 whitelist test cases* | ... -| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link -| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per -| ... | direction). Packets contain Ethernet header, IPv4 header, -| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are -| ... | matching MAC addresses of the TG node. COP (whitelist) is applied -| ... | on link between TG - DUT1 and DUT2 - TG. Additional ipv4 fib table with -| ... | index 1 is created and single entry added to permit all the -| ... | traffic (subnet /24). +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing, two static IPv4 /24 routes and IPv4 COP security whitelist +| ... | ingress /24 filter entries applied on links TG - DUT1 and DUT2 - TG. +| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Test Cases *** -| Find NDR by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| TC01: 64B NDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 64 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -62,11 +76,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| TC02: 64B PDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 64 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -92,10 +107,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| TC03: 1518B NDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -119,11 +136,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| TC04: 1518B PDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -149,10 +167,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| TC05: 9000B NDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 9000B frames by using -| | ... | binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -175,11 +195,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| TC06: 9000B PDR binary search - DUT IPv4 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 9000B frames by using -| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -204,10 +225,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| TC07: 64B NDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 64 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -231,11 +254,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| TC08: 64B PDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by -| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 64 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -261,10 +285,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| TC09: 1518B NDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -288,11 +314,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| TC10: 1518B PDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -318,10 +345,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| TC11: 9000B NDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -344,11 +373,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| TC12: 9000B PDR binary search - DUT IPv4 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -373,10 +403,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| TC13: 64B NDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR +| | ... | for 64 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -400,11 +432,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding with COP in 3-node topology +| TC14: 64B PDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance -| | ... | is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR +| | ... | for 64 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -430,10 +463,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| TC15: 1518B NDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -457,11 +492,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding with COP in 3-node topology +| TC16: 1518B PDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -487,10 +523,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| TC17: 9000B NDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -513,11 +551,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding with COP in 3-node topology +| TC18: 9000B PDR binary search - DUT IPv4 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 diff --git a/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot index 8b80aabcff..16e1797a82 100644 --- a/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_IPv4_Intel-X520-DA2.robot @@ -25,19 +25,34 @@ | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs -| Documentation | *Throughput search suite (based on RFC2544).* +| Documentation | *RFC2544: Pkt throughput IPv4 routing test cases* | ... -| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link -| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per -| ... | direction). Packets contain Ethernet header, IPv4 header, -| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are -| ... | matching MAC addresses of the TG node. +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv4 +| ... | routing and two static IPv4 /24 route entries. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Test Cases *** -| Find NDR by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC01: 64B NDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -55,11 +70,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC02: 64B PDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -79,10 +94,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC03: 1518B NDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -100,11 +116,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC04: 1518B PDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -124,10 +140,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| TC05: 9000B NDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 9000B frames by using -| | ... | binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -144,11 +161,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| TC06: 9000B PDR binary search - DUT IPv4 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 9000B frames by using -| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -167,10 +184,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC07: 64B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -188,11 +206,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC08: 64B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by -| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -212,10 +230,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC09: 1518B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -233,11 +252,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC10: 1518B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -257,10 +276,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| TC11: 9000B NDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -277,11 +297,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv4 forwarding in 3-node topology +| TC12: 9000B PDR binary search - DUT IPv4 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -300,10 +320,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC13: 64B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -321,11 +342,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through IPv4 forwarding in 3-node topology +| TC14: 64B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance -| | ... | is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -345,10 +366,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC15: 1518B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -366,11 +388,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv4 forwarding in 3-node topology +| TC16: 1518B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -390,10 +412,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology +| TC17: 9000B NDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -410,11 +433,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv4 forwarding in 3-node topology +| TC18: 9000B PDR binary search - DUT IPv4 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv4 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 diff --git a/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot index d8c57646d7..40e3291721 100644 --- a/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_IPv6_Cop_Intel-X520-DA2.robot @@ -21,21 +21,36 @@ | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs -| Documentation | *Throughput search suite (based on RFC2544).* +| Documentation | *RFC2544: Pkt throughput IPv6 whitelist test cases* | ... -| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link -| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per -| ... | direction). Packets contain Ethernet header, IPv6 header, and random -| ... | payload. Ethernet header MAC addresses are matching MAC addresses -| ... | of the TG node. COP (whitelist) is applied on link between TG - DUT1 -| ... | and DUT2 - TG. Additional ipv6 fib table with index 1 is created and -| ... | single entry added to permit all the traffic (subnet /64). +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 +| ... | routing, two static IPv6 /64 routes and IPv6 COP security whitelist +| ... | ingress /64 filter entries applied on links TG - DUT1 and DUT2 - TG. +| ... | DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv6 header and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Test Cases *** -| Find NDR by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology +| TC01: 78B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 78B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 78 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -59,11 +74,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology +| TC02: 78B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 78B frames by using -| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 78 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -89,10 +105,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology +| TC03: 1518B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -116,11 +134,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology +| TC04: 1518B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -146,10 +165,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology +| TC05: 9000B NDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 9000B frames by using -| | ... | binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -172,11 +193,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology +| TC06: 9000B PDR binary search - DUT IPv6 whitelist - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 9000B frames by using -| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 1 thread, 1 phy core, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -201,10 +223,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology +| TC07: 78B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 78B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 78 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -228,11 +252,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology +| TC08: 78B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 78B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 78 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -258,10 +283,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology +| TC09: 1518B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -285,11 +312,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology +| TC10: 1518B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -315,10 +343,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology +| TC11: 9000B NDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find NDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -341,11 +371,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology +| TC12: 9000B PDR binary search - DUT IPv6 whitelist - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 2 threads, 2 phy cores, 1 receive queue per NIC port. [Ver] Find PDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -370,10 +401,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology +| TC13: 78B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 78B -| | ... | frames by using binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR +| | ... | for 78 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -397,11 +430,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding with COP in 3-node topology +| TC14: 78B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 78B -| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance -| | ... | is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR +| | ... | for 78 Byte frames using binary search start at 10GE linerate, +| | ... | step 100kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -427,10 +461,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology +| TC15: 1518B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -454,11 +490,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding with COP in 3-node topology +| TC16: 1518B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR +| | ... | for 1518 Byte frames using binary search start at 10GE linerate, +| | ... | step 10kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -484,11 +521,12 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology +| TC17: 9000B NDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B -| | ... | frames by using binary search starting at 138,580pps, stepping down -| | ... | with step of 5,000pps. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find NDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -511,11 +549,12 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through IPv6 forwarding with COP in 3-node topology +| TC18: 9000B PDR binary search - DUT IPv6 whitelist - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing and whitelist filters config with \ +| | ... | 4 threads, 4 phy cores, 2 receive queue per NIC port. [Ver] Find PDR +| | ... | for 9000 Byte frames using binary search start at 10GE linerate, +| | ... | step 5kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 diff --git a/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot b/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot index c0eb7f59f7..4d06528b30 100644 --- a/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_IPv6_Intel-X520-DA2.robot @@ -20,19 +20,33 @@ | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs -| Documentation | *Throughput search suite (based on RFC2544).* +| Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... -| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link -| ... | between nodes. Traffic profile contain 2 L3 streams (1 stream per -| ... | direction). Packets contain Ethernet header, IPv6 header, and random -| ... | payload. Ethernet header MAC addresses are matching MAC addresses -| ... | of the TG node. +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 +| ... | routing and two static IPv6 /64 route entries. DUT1 and DUT2 tested with +| ... | 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv6 header and static payload. +| ... | MAC addresses are matching MAC addresses of the TG node interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Test Cases *** -| Find NDR by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| TC01: 78B NDR binary search - DUT IPv6 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 78B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -50,11 +64,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| TC02: 78B PDR binary search - DUT IPv6 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 78B frames by using -| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -74,10 +88,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| TC03: 1518B NDR binary search - DUT IPv6 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -95,11 +110,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| TC04: 1518B PDR binary search - DUT IPv6 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -119,10 +134,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology +| TC05: 9000B NDR binary search - DUT IPv6 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 9000B frames by using -| | ... | binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -139,11 +155,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology +| TC06: 9000B PDR binary search - DUT IPv6 - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 9000B frames by using -| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -162,10 +178,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| TC07: 78B NDR binary search - DUT IPv6 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 78B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -183,11 +200,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| TC08: 78B PDR binary search - DUT IPv6 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 78B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -207,10 +224,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| TC09: 1518B NDR binary search - DUT IPv6 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -228,11 +246,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| TC10: 1518B PDR binary search - DUT IPv6 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -252,10 +270,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology +| TC11: 9000B NDR binary search - DUT IPv6 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -272,11 +291,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through IPv6 forwarding in 3-node topology +| TC12: 9000B PDR binary search - DUT IPv6 - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -295,10 +314,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| TC13: 78B NDR binary search - DUT IPv6 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 78B -| | ... | frames by using binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -316,11 +336,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 78B frames through IPv6 forwarding in 3-node topology +| TC14: 78B PDR binary search - DUT IPv6 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 78B -| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance -| | ... | is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 78 | | ${min_rate}= | Set Variable | 100000 @@ -340,10 +360,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| TC15: 1518B NDR binary search - DUT IPv6 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -361,11 +382,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through IPv6 forwarding in 3-node topology +| TC16: 1518B PDR binary search - DUT IPv6 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -385,11 +406,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology +| TC17: 9000B NDR binary search - DUT IPv6 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B -| | ... | frames by using linear search starting at 138,580pps, stepping down -| | ... | with step of 5,000pps. +| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -406,11 +427,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 linear search and 9000B frames through IPv6 forwarding in 3-node topology +| TC18: 9000B PDR binary search - DUT IPv6 - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs IPv6 routing config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 diff --git a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot index 7b9c06ed40..23339d6031 100644 --- a/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_Xconnect_Dot1q_Intel-X520-DA2.robot @@ -21,25 +21,37 @@ | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs -| Documentation | *Throughput search suite (based on RFC2544).* +| Documentation | *RFC2544: Pkt throughput L2XC test cases* | ... -| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link -| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per -| ... | direction). Packets contain Ethernet header, IPv4 header, -| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are -| ... | matching MAC addresses of the TG node. DUT nodes are interconnected -| ... | with VLAN dot1q configured interfaces with VLAN 10. +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** | ${subid}= | 10 | ${tag_rewrite}= | pop-1 *** Test Cases *** -| Find NDR by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC01: 64B NDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate by using binary search with -| | ... | threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging is -| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -65,12 +77,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC02: 64B PDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate by using binary search with -| | ... | threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging is -| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -98,11 +109,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC03: 1518B NDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate by using binary search with -| | ... | threshold 10,000pps. Frames from and to TG are 1518B long. Tagging is -| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -128,12 +139,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC04: 1518B PDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate by using binary search with -| | ... | threshold 10,000pps. Frames from and to TG are 1518B long. Tagging is -| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -161,11 +171,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC05: 9000B NDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate by using binary search with -| | ... | threshold 5,000pps. Frames from and to TG are 9000B long. Tagging is -| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -190,12 +200,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC06: 9000B PDR binary search - DUT L2XC with dot1q - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate by using binary search with -| | ... | threshold 5,000pps. Frames from and to TG are 9000B long. Tagging is -| | ... | applied between DUTs inserting 4B VLAN ID into a packet header. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -222,11 +231,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC07: 64B NDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate by using binary search -| | ... | with threshold 0.1Mpps. Frames from and to TG are 64B long. Tagging -| | ... | is applied between DUTs inserting 4B VLAN ID into a packet header. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -252,12 +261,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC08: 64B PDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate by using binary -| | ... | search with threshold 0.1Mpps. Frames from and to TG are 64B long. -| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet -| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -285,12 +293,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC09: 1518B NDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate by using binary search -| | ... | with threshold 10,000pps. Frames from and to TG are 1518B long. -| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet -| | ... | header. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -316,12 +323,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC10: 1518B PDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate by using binary -| | ... | search with threshold 10,000pps. Frames from and to TG are 1518B long. -| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet -| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -349,12 +355,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC11: 9000B NDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate by using binary search -| | ... | with threshold 5,000pps. Frames from and to TG are 9000B long. -| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet -| | ... | header. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -379,12 +384,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC12: 9000B PDR binary search - DUT L2XC with dot1q - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate by using binary -| | ... | search with threshold 5,000pps. Frames from and to TG are 9000B long. -| | ... | Tagging is applied between DUTs inserting 4B VLAN ID into a packet -| | ... | header. Loss acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -411,12 +415,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC13: 64B NDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate by using -| | ... | binary search with threshold 0.1Mpps. Frames from and to TG are 64B -| | ... | long. Tagging is applied between DUTs inserting 4B VLAN ID into a -| | ... | packet header. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -442,13 +445,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC14: 64B PDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate by using -| | ... | binary search with threshold 0.1Mpps. Frames from and to TG are 64B -| | ... | long. Tagging is applied between DUTs inserting 4B VLAN ID into a -| | ... | packet header. Loss acceptance is set to 0.5 percent of transmitted -| | ... | packets. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -476,12 +477,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC15: 1518B NDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate by using -| | ... | binary search with threshold 10,000pps. Frames from and to TG are -| | ... | 1518B long. Tagging is applied between DUTs inserting 4B VLAN ID into -| | ... | a packet header. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -507,13 +507,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC16: 1518B PDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate by using -| | ... | binary search with threshold 10,000pps. Frames from and to TG are -| | ... | 1518B long. Tagging is applied between DUTs inserting 4B VLAN ID into -| | ... | a packet header. Loss acceptance is set to 0.5 percent of transmitted -| | ... | packets. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -541,12 +539,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC17: 9000B NDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate by using -| | ... | binary search with threshold 5,000pps. Frames from and to TG are -| | ... | 9000B long. Tagging is applied between DUTs inserting 4B VLAN ID into -| | ... | a packet header. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -571,13 +568,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through VLAN dot1q sub-interfaces inter-connected using L2 cross connect in 3-node topology +| TC18: 9000B PDR binary search - DUT L2XC with dot1q - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate by using -| | ... | binary search with threshold 5,000pps. Frames from and to TG are -| | ... | 9000B long. Tagging is applied between DUTs inserting 4B VLAN ID into -| | ... | a packet header. Loss acceptance is set to 0.5 percent of transmitted -| | ... | packets. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 diff --git a/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot b/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot index fe6da8e4c0..b01b5ef93d 100644 --- a/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot +++ b/tests/suites/performance/Long_Xconnect_Intel-X520-DA2.robot @@ -22,19 +22,33 @@ | Suite Teardown | 3-node Performance Suite Teardown | Test Setup | Setup all DUTs before test | Test Teardown | Run Keyword | Remove startup configuration of VPP from all DUTs -| Documentation | *Throughput search suite (based on RFC2544).* +| Documentation | *RFC2544: Pkt throughput L2XC test cases* | ... -| ... | Test suite uses 3-node topology TG - DUT1 - DUT2 - TG, with one link -| ... | between nodes. Traffic profile contain 2 L2 streams (1 stream per -| ... | direction). Packets contain Ethernet header, IPv4 header, -| ... | IP protocol=61 and random payload. Ethernet header MAC addresses are -| ... | matching MAC addresses of the TG node. +| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology +| ... | with single links between nodes. +| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4. +| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2 cross- +| ... | connect. DUT1 and DUT2 tested with 2p10GE NIC X520 Niantic by Intel. +| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop +| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop +| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage +| ... | of packets transmitted. NDR and PDR are discovered for different +| ... | Ethernet L2 frame sizes using either binary search or linear search +| ... | algorithms with configured starting rate and final step that determines +| ... | throughput measurement resolution. Test packets are generated by TG on +| ... | links to DUTs. TG traffic profile contains two L3 flow-groups +| ... | (flow-group per direction, 253 flows per flow-group) with all packets +| ... | containing Ethernet header, IPv4 header with IP protocol=61 and static +| ... | payload. MAC addresses are matching MAC addresses of the TG node +| ... | interfaces. +| ... | *[Ref] Applicable standard specifications:* RFC2544. *** Test Cases *** -| Find NDR by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| TC01: 64B NDR binary search - DUT L2XC - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -52,11 +66,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| TC02: 64B PDR binary search - DUT L2XC - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -76,10 +90,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| TC03: 1518B NDR binary search - DUT L2XC - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -97,11 +112,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| TC04: 1518B PDR binary search - DUT L2XC - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 1518B frames by using -| | ... | binary search with threshold 10,000pps. Loss acceptance is set to 0.5 -| | ... | percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -121,10 +136,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| TC05: 9000B NDR binary search - DUT L2XC - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with non drop rate for 9000B frames by using -| | ... | binary search with threshold 5000pps. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -141,11 +157,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| TC06: 9000B PDR binary search - DUT L2XC - 1thread 1core 1rxq | | [Documentation] -| | ... | Find throughput with partial drop rate for 9000B frames by using -| | ... | binary search with threshold of 5,000pps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 1 thread, 1 phy core, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 1_THREAD_NOHTT_RXQUEUES_1 | SINGLE_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -164,10 +180,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| TC07: 64B NDR binary search - DUT L2XC - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 64B frames by using -| | ... | binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -185,11 +202,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| TC08: 64B PDR binary search - DUT L2XC - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 64B frames by -| | ... | using binary search with threshold 0.1Mpps. Loss acceptance is set to -| | ... | 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -209,10 +226,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| TC09: 1518B NDR binary search - DUT L2XC - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -230,11 +248,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| TC10: 1518B PDR binary search - DUT L2XC - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 1518B frames by -| | ... | using binary search with threshold 10,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -254,10 +272,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| TC11: 9000B NDR binary search - DUT L2XC - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with non drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -274,11 +293,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 2 cores and rxqueues 1 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| TC12: 9000B PDR binary search - DUT L2XC - 2threads 2cores 1rxq | | [Documentation] -| | ... | Find throughput on 2 cores with partial drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. Loss acceptance is set -| | ... | to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 2 threads, 2 phy cores, \ +| | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 2_THREAD_NOHTT_RXQUEUES_1 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -297,10 +316,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| TC13: 64B NDR binary search - DUT L2XC - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -318,11 +338,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 64B frames through L2 cross connect in 3-node topology +| TC14: 64B PDR binary search - DUT L2XC - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 64B -| | ... | frames by using binary search with threshold 0.1Mpps. Loss acceptance -| | ... | is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 64 Byte frames +| | ... | using binary search start at 10GE linerate, step 100kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 64 | | ${min_rate}= | Set Variable | 100000 @@ -342,10 +362,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| TC15: 1518B NDR binary search - DUT L2XC - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -363,11 +384,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 1518B frames through L2 cross connect in 3-node topology +| TC16: 1518B PDR binary search - DUT L2XC - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 1518B -| | ... | frames by using binary search with threshold 10,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames +| | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 1518 | | ${min_rate}= | Set Variable | 10000 @@ -387,10 +408,11 @@ | | ... | ${glob_loss_acceptance} | | ... | ${glob_loss_acceptance_type} -| Find NDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| TC17: 9000B NDR binary search - DUT L2XC - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with non drop rate for 9000B frames by -| | ... | using binary search with threshold 5,000pps. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | NDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 @@ -407,11 +429,11 @@ | | ... | ${min_rate} | ${max_rate} | | ... | ${threshold} -| Find PDR with 4 cores and rxqueues 2 by using RFC2544 binary search and 9000B frames through L2 cross connect in 3-node topology +| TC18: 9000B PDR binary search - DUT L2XC - 4threads 4cores 2rxq | | [Documentation] -| | ... | Find throughput on 4 cores and rxqueues 2 with partial drop rate for 9000B -| | ... | frames by using binary search with threshold 5,000pps. Loss -| | ... | acceptance is set to 0.5 percent of transmitted packets. +| | ... | [Cfg] DUT runs L2XC switching config with 4 threads, 4 phy cores, \ +| | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames +| | ... | using binary search start at 10GE linerate, step 5kpps, LT=0.5%. | | [Tags] | 4_THREAD_NOHTT_RXQUEUES_2 | MULTI_THREAD | PDR | | ${framesize}= | Set Variable | 9000 | | ${min_rate}= | Set Variable | 5000 |