Aligning FUNC/PERF keywords - Data driven

Change-Id: I233c8908c724556db09c60de6efa9237068fb4c3
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 0 insertions, 96 deletions

diff --git a/tests/vpp/device/container_memif/eth2p-ethip6-ip6base-eth-2memif-1dcr-dev.robot b/tests/vpp/device/container_memif/eth2p-ethip6-ip6base-eth-2memif-1dcr-dev.robot
deleted file mode 100644
index a645a58792..0000000000
--- a/tests/vpp/device/container_memif/eth2p-ethip6-ip6base-eth-2memif-1dcr-dev.robot
+++ /dev/null
@@ -1,96 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | BASE | MEMIF | DOCKER
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | container
-| ...
-| Documentation | *IPv4 routing test cases with memif interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 for IPv6 routing on \
-| ... | both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
-| ... | two static IPv6 /64 route entries. Container is connected to VPP via \
-| ... | Memif interface. Container is running same VPP version as running on \
-| ... | DUT.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in \
-| ... | one direction by TG on links to DUT1 and via container; on receive TG \
-| ... | verifies packets for correctness and their IPv6 src-addr, dst-addr and \
-| ... | MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | memif_plugin.so
-| ${nic_name}= | virtual
-| ${overhead}= | ${0}
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_functional
-
-*** Test Cases ***
-| tc01-eth2p-ethip6-ip6base-eth-2memif-1dcr-dev
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv6 Echo Reqs in both directions between two\
-| | ... | of its interfaces to be routed by DUT to and from docker; verify\
-| | ... | all packets are received.
-| | ...
-| | Set Test Variable | ${frame_size} | ${62}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Set interfaces in path up
-| | And Set up memif interfaces on DUT node
-| | ... | ${dut1} | memif-DUT1_CNF | memif-DUT1_CNF
-| | ... | memif_if1=memif_if1 | memif_if2=memif_if2
-| | ... | rxq=${rxq_count_int} | txq=${rxq_count_int}
-| | And Add Fib Table | ${dut1} | 20 | ipv6=${True}
-| | And Assign Interface To Fib Table
-| | ... | ${dut1} | ${memif_if2} | 20 | ipv6=${True}
-| | And Assign Interface To Fib Table
-| | ... | ${dut1} | ${dut1_if2} | 20 | ipv6=${True}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | 2001:1::1 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${memif_if1} | 2001:2::1 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${memif_if2} | 2001:2::2 | 64
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if2} | 2001:3::1 | 64
-| | ${memif_if2_key}= | Get interface by sw index | ${nodes['DUT1']}
-| | ... | ${memif_if2}
-| | ${memif_if2_mac}= | Get interface MAC | ${nodes['DUT1']} | ${memif_if2_key}
-| | And Vpp Route Add
-| | ... | ${dut1} | 2001:3::0 | 64 | gateway=2001:2::2 | interface=${memif_if1}
-| | And Vpp Route Add
-| | ... | ${dut1} | 2001:1::0 | 64 | gateway=2001:2::2 | interface=${memif_if2}
-| | ... | vrf=20
-| | VPP Add IP Neighbor
-| | ... | ${dut1} | ${memif_if1} | 2001:2::2 | ${memif_if2_mac}
-| | VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if2} | 2001:3::2 | ${tg_if2_mac}
-| | Then Send packet and verify headers
-| | ... | ${tg} | 2001:1::1 | 2001:3::2
-| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
-| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}