vpp_device: Multiple NICs (suitegen)

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c

1 files changed, 0 insertions, 102 deletions

diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
deleted file mode 100644
index f8b0ef3ba9..0000000000
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev.robot
+++ /dev/null
@@ -1,102 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | IP4FWD | IPSEC | IPSECSW | IPSECTPT | IP4BASE
-| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256
-|
-| Suite Setup | Setup suite topology interfaces | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | ipsec_sa
-|
-| Test Template | Local Template
-|
-| Documentation | *IPv4 IPsec transport mode test suite.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\
-| ... | loopback an physical interface IPv4 addresses, static ARP record, route\
-| ... | and IPsec manual keyed connection in transport mode.
-| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
-| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
-| ... | crypto_openssl_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${overhead}= | ${54}
-| ${tg_spi}= | ${1000}
-| ${dut_spi}= | ${1001}
-| ${ESP_PROTO}= | ${50}
-| ${tg_if1_ip4}= | 192.168.100.2
-| ${tg_if2_ip4}= | 192.168.4.4
-| ${dut_if1_ip4}= | 192.168.100.3
-| ${dut_if2_ip4}= | 192.168.4.3
-| ${tg_host_ip4}= | 192.168.3.3
-| ${ip4_plen}= | ${24}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in\
-| | ... | transport mode.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | # These are enums (not strings) so they cannot be in Variables table.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA 512 256
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Configure topology for IPv4 IPsec testing
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
-| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip}
-
-*** Test Cases ***
-| 110B-ethip4ipsec1tptsw-ip4base-policy-aes-128-cbc-sha-512-256-dev
-| | [Tags] | 110B
-| | frame_size=${110} | phy_cores=${0}