Aligning FUNC/PERF keywords - Data driven

Change-Id: I233c8908c724556db09c60de6efa9237068fb4c3
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 0 insertions, 102 deletions

diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot
deleted file mode 100644
index bf5db490b4..0000000000
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot
+++ /dev/null
@@ -1,102 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | IP4FWD | IPSEC | IPSEC_TNL | IP4BASE
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-| ...
-| Documentation | *IPv4 IPsec tunnel mode test suite.*
-| ...
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure\
-| ... | loopback an physical interface IPv4 addresses, static ARP record, route\
-| ... | and IPsec manual keyed connection in tunnel mode.
-| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet\
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
-| ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
-| ${nic_name}= | virtual
-| ${overhead}= | ${58}
-| ${tg_spi}= | ${1000}
-| ${dut_spi}= | ${1001}
-| ${ESP_PROTO}= | ${50}
-| ${tg_if_ip4}= | 192.168.100.2
-| ${dut_if_ip4}= | 192.168.100.3
-| ${tg_lo_ip4}= | 192.168.3.3
-| ${dut_lo_ip4}= | 192.168.4.4
-| ${ip4_plen}= | ${24}
-
-*** Test Cases ***
-| tc01-eth2p-ethip4ipsectnl-ip4base-dev-aes-128-cbc-sha-256-128
-| | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\
-| | ... | mode.
-| | ...
-| | Set Test Variable | ${frame_size} | ${106}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Configure topology for IPv4 IPsec testing
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA 256 128
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
-| | ... | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
-| | ... | ${dut_tun_ip}
-
-| tc02-eth2p-ethip4ipsectnl-ip4base-dev-aes-128-cbc-sha-512-256
-| | [Documentation]
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\
-| | ... | mode.
-| | ...
-| | Set Test Variable | ${frame_size} | ${106}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Configure topology for IPv4 IPsec testing
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA 512 256
-| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | And Configure manual keyed connection for IPSec
-| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
-| | ... | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
-| | ... | ${dut_tun_ip}