vpp_device: Multiple NICs (suitegen)

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c

3 files changed, 227 insertions, 0 deletions

diff --git a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
new file mode 100644
index 0000000000..25a6e2fa54
--- /dev/null
+++ b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
@@ -0,0 +1,105 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Intel-X710 | IP6FWD | IPSEC | IPSECSW | IPSECTUN | IP6BASE
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | ipsec_sa
+|
+| Test Template | Local Template
+|
+| Documentation | *IPv6 IPsec tunnel mode test suite.*
+|
+| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| ... | between nodes.
+| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure
+| ... | loopback an physical interface IPv6 addresses, static ARP record, route
+| ... | and IPsec manual keyed connection in tunnel mode.
+| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet
+| ... | is received on TG from DUT1.
+| ... | *[Ref] Applicable standard specifications:* RFC4303.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${54}
+| ${tg_spi}= | ${1000}
+| ${dut_spi}= | ${1001}
+| ${ESP_PROTO}= | ${50}
+| ${tg_if1_ip6}= | 3ffe:5f::1
+| ${tg_if2_ip6}= | 3ffe:60::4
+| ${dut_if1_ip6}= | 3ffe:5f::2
+| ${dut_if2_ip6}= | 3ffe:60::3
+| ${tg_host_ip6}= | 3ffe:61::3
+| ${ip6_plen}= | ${64}
+| ${ip6_plen_rt}= | ${128}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in tunnel\
+| | ... | mode.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA 512 256
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Configure topology for IPv6 IPsec testing
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Configure manual keyed connection for IPSec
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
+| | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE}
+| | Then Send IPsec Packet and verify ESP encapsulation in received packet
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip} | ${tg_tun_ip}
+| | ... | ${dut_tun_ip}
+
+*** Test Cases ***
+| 78B-0c-ethip6ipsec1tnlsw-ip6base-policy-aes128cbc-hmac512sha-scapy
+| | [Tags] | 78B | 0C
+| | frame_size=${78} | phy_cores=${0}
diff --git a/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
new file mode 100644
index 0000000000..4f5996ef2a
--- /dev/null
+++ b/tests/vpp/device/crypto/ethip6/2n1l-10ge2p1x710-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy.robot
@@ -0,0 +1,104 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Intel-X710 | IP6FWD | IPSEC | IPSECSW | IPSECTPT | IP6BASE
+| ... | AES_128_CBC | HMAC_SHA_512 | HMAC | AES | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | ipsec_sa
+|
+| Test Template | Local Template
+|
+| Documentation | *IPv6 IPsec transport mode test suite.*
+|
+| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
+| ... | between nodes.
+| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure
+| ... | loopback an physical interface IPv6 addresses, static ARP record, route
+| ... | and IPsec manual keyed connection in transport mode.
+| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet
+| ... | is received on TG from DUT1.
+| ... | *[Ref] Applicable standard specifications:* RFC4303.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ... | crypto_native_plugin.so | crypto_ipsecmb_plugin.so
+| ... | crypto_openssl_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${58}
+| ${tg_spi}= | ${1000}
+| ${dut_spi}= | ${1001}
+| ${ESP_PROTO}= | ${50}
+| ${tg_if1_ip6}= | 3ffe:5f::1
+| ${tg_if2_ip6}= | 3ffe:60::4
+| ${dut_if1_ip6}= | 3ffe:5f::2
+| ${dut_if2_ip6}= | 3ffe:60::3
+| ${tg_host_ip6}= | 3ffe:61::3
+| ${ip6_plen}= | ${64}
+| ${ip6_plen_rt}= | ${128}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
+| | ... | algorithm AES_128_CBC and integrity algorithm HMAC_SHA_512 in\
+| | ... | transport mode.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | # These are enums (not strings) so they cannot be in Variables table.
+| | ${encr_alg}= | Crypto Alg AES CBC 128
+| | ${auth_alg}= | Integ Alg SHA 512 256
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Configure topology for IPv6 IPsec testing
+| | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
+| | And Configure manual keyed connection for IPSec
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${tg_dst_ip} | ${tg_src_ip}
+| | ... | is_ipv6=${TRUE}
+| | Then Send IPsec Packet and verify ESP encapsulation in received packet
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
+| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
+| | ... | ${dut_spi} | ${tg_src_ip} | ${tg_dst_ip}
+
+*** Test Cases ***
+| 78B-0c-ethip6ipsec1tptsw-ip6base-policy-aes128cbc-hmac512sha-scapy
+| | [Tags] | 78B | 0C
+| | frame_size=${78} | phy_cores=${0}
diff --git a/tests/vpp/device/crypto/ethip6/regenerate_testcases.py b/tests/vpp/device/crypto/ethip6/regenerate_testcases.py
new file mode 100755
index 0000000000..b1c6336c72
--- /dev/null
+++ b/tests/vpp/device/crypto/ethip6/regenerate_testcases.py
@@ -0,0 +1,18 @@
+#!/usr/bin/env python3
+
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+from resources.libraries.python.autogen.Regenerator import Regenerator
+
+Regenerator().regenerate_glob(u"*.robot", protocol=u"ip6")