CSIT-1539 Aligning FUNC/PERF keywords - Phase III

Change-Id: Ibd3e99390bf004173d3d126946b95ffe9ba8f196
Signed-off-by: Peter Mikus <pmikus@cisco.com>

4 files changed, 81 insertions, 53 deletions

diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot
index b85bd70f96..bf5db490b4 100644
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip4ipsectnl-ip4base-dev.robot
@@ -14,10 +14,10 @@
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
 | ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
-| ... | FUNCTEST | IP4FWD | IPSEC | IPSEC_TNL | IP4BASE
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP4FWD | IPSEC | IPSEC_TNL | IP4BASE
 | ...
-| Suite Setup | Setup suite single link
+| Suite Setup | Setup suite single link | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace
 | ...
@@ -36,6 +36,7 @@
 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
 | ${nic_name}= | virtual
+| ${overhead}= | ${58}
 | ${tg_spi}= | ${1000}
 | ${dut_spi}= | ${1001}
 | ${ESP_PROTO}= | ${50}
@@ -46,14 +47,17 @@
 | ${ip4_plen}= | ${24}
 
 *** Test Cases ***
-| tc01-eth2p-ethip4ipsectnl-ip4base-device-aes-128-cbc-sha-256-128
+| tc01-eth2p-ethip4ipsectnl-ip4base-dev-aes-128-cbc-sha-256-128
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
 | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\
 | | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ...
+| | Set Test Variable | ${frame_size} | ${106}
+| | Set Test Variable | ${rxq_count_int} | ${1}
 | | ...
 | | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And VPP Enable Traces On All Duts | ${nodes}
 | | When Configure topology for IPv4 IPsec testing
@@ -61,23 +65,26 @@
 | | ${auth_alg}= | Integ Alg SHA 256 128
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
 | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
 | | ... | ${dut_tun_ip} | ${tg_tun_ip}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
 | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
 | | ... | ${dut_tun_ip}
 
-| tc02-eth2p-ethip4ipsectnl-ip4base-device-aes-128-cbc-sha-512-256
+| tc02-eth2p-ethip4ipsectnl-ip4base-dev-aes-128-cbc-sha-512-256
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
 | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\
 | | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ...
+| | Set Test Variable | ${frame_size} | ${106}
+| | Set Test Variable | ${rxq_count_int} | ${1}
 | | ...
 | | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And VPP Enable Traces On All Duts | ${nodes}
 | | When Configure topology for IPv4 IPsec testing
@@ -85,11 +92,11 @@
 | | ${auth_alg}= | Integ Alg SHA 512 256
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
 | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
 | | ... | ${dut_tun_ip} | ${tg_tun_ip}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
 | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
 | | ... | ${dut_tun_ip}
diff --git a/tests/vpp/device/crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot
index f37630a0ce..5cf0df6355 100644
--- a/tests/vpp/device/crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip4ipsectpt-ip4base-dev.robot
@@ -14,10 +14,10 @@
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
 | ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
-| ... | FUNCTEST | IP4FWD | IPSEC | IPSEC_TPT | IP4BASE
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP4FWD | IPSEC | IPSEC_TPT | IP4BASE
 | ...
-| Suite Setup | Setup suite single link
+| Suite Setup | Setup suite single link | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace
 | ...
@@ -36,6 +36,7 @@
 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
 | ${nic_name}= | virtual
+| ${overhead}= | ${58}
 | ${tg_spi}= | ${1000}
 | ${dut_spi}= | ${1001}
 | ${ESP_PROTO}= | ${50}
@@ -46,14 +47,17 @@
 | ${ip4_plen}= | ${24}
 
 *** Test Cases ***
-| tc01-eth2p-ethip4ipsectpt-ip4base-device-aes-128-cbc-sha-256-128
+| tc01-eth2p-ethip4ipsectpt-ip4base-dev-aes-128-cbc-sha-256-128
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in\
+| | ... | transport mode.
+| | ...
+| | Set Test Variable | ${frame_size} | ${90}
+| | Set Test Variable | ${rxq_count_int} | ${1}
 | | ...
 | | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And VPP Enable Traces On All Duts | ${nodes}
 | | When Configure topology for IPv4 IPsec testing
@@ -61,21 +65,24 @@
 | | ${auth_alg}= | Integ Alg SHA 256 128
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
 | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
 | | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
 
-| tc02-eth2p-ethip4ipsectpt-ip4base-device-aes-128-cbc-sha-512-256
+| tc02-eth2p-ethip4ipsectpt-ip4base-dev-aes-128-cbc-sha-512-256
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in\
+| | ... | transport mode.
+| | ...
+| | Set Test Variable | ${frame_size} | ${90}
+| | Set Test Variable | ${rxq_count_int} | ${1}
 | | ...
 | | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And VPP Enable Traces On All Duts | ${nodes}
 | | When Configure topology for IPv4 IPsec testing
@@ -83,9 +90,9 @@
 | | ${auth_alg}= | Integ Alg SHA 512 256
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
 | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
 | | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
diff --git a/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot
index 5524b4fccc..b8c5ed5bb5 100644
--- a/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip6ipsectnl-ip6base-dev.robot
@@ -1,4 +1,4 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
+# Copyright (c) 2019 Cisco and/or its affiliates.
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at:
@@ -14,10 +14,10 @@
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
 | ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
-| ... | FUNCTEST | IP6FWD | IPSEC | IPSEC_TNL | IP6BASE
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP6FWD | IPSEC | IPSEC_TNL | IP6BASE
 | ...
-| Suite Setup | Setup suite single link
+| Suite Setup | Setup suite single link | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace
 | ...
@@ -36,6 +36,7 @@
 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
 | ${nic_name}= | virtual
+| ${overhead}= | ${58}
 | ${tg_spi}= | ${1000}
 | ${dut_spi}= | ${1001}
 | ${ESP_PROTO}= | ${50}
@@ -47,14 +48,17 @@
 | ${ip6_plen_rt}= | ${128}
 
 *** Test Cases ***
-| tc01-eth2p-ethip6ipsectnl-ip6base-device-aes-128-cbc-sha-256-128
+| tc01-eth2p-ethip6ipsectnl-ip6base-dev-aes-128-cbc-sha-256-128
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
 | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in tunnel\
 | | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ...
+| | Set Test Variable | ${frame_size} | ${158}
+| | Set Test Variable | ${rxq_count_int} | ${1}
 | | ...
 | | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And VPP Enable Traces On All Duts | ${nodes}
 | | When Configure topology for IPv6 IPsec testing
@@ -62,23 +66,26 @@
 | | ${auth_alg}= | Integ Alg SHA 256 128
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
 | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
 | | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
 | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
 | | ... | ${dut_tun_ip}
 
-| tc02-eth2p-ethip6ipsectnl-ip6base-device-aes-128-cbc-sha-512-256
+| tc02-eth2p-ethip6ipsectnl-ip6base-dev-aes-128-cbc-sha-512-256
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
 | | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in tunnel\
 | | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ...
+| | Set Test Variable | ${frame_size} | ${158}
+| | Set Test Variable | ${rxq_count_int} | ${1}
 | | ...
 | | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And VPP Enable Traces On All Duts | ${nodes}
 | | When Configure topology for IPv6 IPsec testing
@@ -86,11 +93,11 @@
 | | ${auth_alg}= | Integ Alg SHA 512 256
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
 | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_src_ip} | ${tg_src_ip}
 | | ... | ${dut_tun_ip} | ${tg_tun_ip} | is_ipv6=${TRUE}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
 | | ... | ${dut_spi} | ${tg_src_ip} | ${dut_src_ip} | ${tg_tun_ip}
 | | ... | ${dut_tun_ip}
diff --git a/tests/vpp/device/crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot b/tests/vpp/device/crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot
index a4623eda0d..dd5537016a 100644
--- a/tests/vpp/device/crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot
+++ b/tests/vpp/device/crypto/eth2p-ethip6ipsectpt-ip6base-dev.robot
@@ -14,10 +14,10 @@
 *** Settings ***
 | Resource | resources/libraries/robot/shared/default.robot
 | ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
-| ... | FUNCTEST | IP6FWD | IPSEC | IPSEC_TPT | IP6BASE
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP6FWD | IPSEC | IPSEC_TPT | IP6BASE
 | ...
-| Suite Setup | Setup suite single link
+| Suite Setup | Setup suite single link | scapy
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace
 | ...
@@ -36,6 +36,7 @@
 | @{plugins_to_enable}= | dpdk_plugin.so | crypto_ia32_plugin.so
 | ... | crypto_ipsecmb_plugin.so | crypto_openssl_plugin.so
 | ${nic_name}= | virtual
+| ${overhead}= | ${58}
 | ${tg_spi}= | ${1000}
 | ${dut_spi}= | ${1001}
 | ${ESP_PROTO}= | ${50}
@@ -47,14 +48,17 @@
 | ${ip6_plen_rt}= | ${128}
 
 *** Test Cases ***
-| tc01-eth2p-ethip6ipsectpt-ip6base-device-aes-128-cbc-sha-256-128
+| tc01-eth2p-ethip6ipsectpt-ip6base-dev-aes-128-cbc-sha-256-128
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in\
+| | ... | transport mode.
+| | ...
+| | Set Test Variable | ${frame_size} | ${174}
+| | Set Test Variable | ${rxq_count_int} | ${1}
 | | ...
 | | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And VPP Enable Traces On All Duts | ${nodes}
 | | When Configure topology for IPv6 IPsec testing
@@ -62,22 +66,25 @@
 | | ${auth_alg}= | Integ Alg SHA 256 128
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
 | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
 | | ... | is_ipv6=${TRUE}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
 | | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
 
-| tc02-eth2p-ethip6ipsectpt-ip6base-device-aes-128-cbc-sha-512-256
+| tc02-eth2p-ethip6ipsectpt-ip6base-dev-aes-128-cbc-sha-512-256
 | | [Documentation]
 | | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
+| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in\
+| | ... | transport mode.
+| | ...
+| | Set Test Variable | ${frame_size} | ${174}
+| | Set Test Variable | ${rxq_count_int} | ${1}
 | | ...
 | | Given Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
 | | And Apply startup configuration on all VPP DUTs
 | | And VPP Enable Traces On All Duts | ${nodes}
 | | When Configure topology for IPv6 IPsec testing
@@ -85,10 +92,10 @@
 | | ${auth_alg}= | Integ Alg SHA 512 256
 | | And Generate keys for IPSec | ${encr_alg} | ${auth_alg}
 | | And Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
+| | ... | ${dut1} | ${dut1_if1} | ${encr_alg} | ${encr_key} | ${auth_alg}
 | | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
 | | ... | is_ipv6=${TRUE}
 | | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac}
 | | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
 | | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}