vpp_device: Multiple NICs (suitegen)

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c

1 files changed, 104 insertions, 0 deletions

diff --git a/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot
new file mode 100644
index 0000000000..90707d57d3
--- /dev/null
+++ b/tests/vpp/device/interfaces/2n1l-10ge2p1x710-ethicmp4-ip4base-eth-1tap-scapy.robot
@@ -0,0 +1,104 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | 1TAP | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethicmp4-ip4base-eth-1tap
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test | namespace
+| Test Teardown | Tear down test | packet_trace | namespace
+|
+| Test Template | Local Template
+|
+| Documentation | *Tap Interface Traffic Tests*
+| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
+| ... | between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
+| ... | IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
+| ... | are set depending on test case; Namespaces (NM)
+| ... | are set on DUT1 with attached linux-TAP.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
+| ... | are sent by TG on link to DUT1; On receipt TG verifies packets
+| ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${0}
+| ${tap1_VPP_ip}= | 16.0.10.1
+| ${tap1_NM_ip}= | 16.0.10.2
+| ${tap1_NM_mac}= | 02:00:00:00:00:02
+| ${dut_ip_address}= | 192.168.0.1
+| ${tg_ip_address}= | 192.168.0.2
+| ${tg_ip_address_GW}= | 192.168.0.0
+| ${prefix}= | 24
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\
+| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP.
+| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\
+| | ... | received on TG.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | ${int1}= | And Add Tap Interface | ${dut1} | tap0
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${int1} | ${tap1_VPP_ip} | ${prefix}
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${dut_ip_address} | ${prefix}
+| | And Set Interface State | ${dut1} | ${int1} | up
+| | And Set Linux Interface MAC | ${dut1} | tap0 | ${tap1_NM_mac}
+| | And Set Linux Interface IP | ${dut1} | tap0 | ${tap1_NM_ip} | ${prefix}
+| | And Add Linux Route
+| | ... | ${dut1} | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip}
+| | And VPP Add IP Neighbor
+| | ... | ${dut1} | ${DUT1_${int}1}[0] | ${tg_ip_address} | ${TG_pf1_mac}[0]
+| | And VPP Add IP Neighbor
+| | ... | ${dut1} | ${int1} | ${tap1_NM_ip} | ${tap1_NM_mac}
+| | Then Send ICMP echo request and verify answer
+| | ... | ${tg} | ${TG_pf1}[0] | ${DUT1_vf1_mac}[0] | ${TG_pf1_mac}[0]
+| | ... | ${tap1_NM_ip} | ${tg_ip_address}
+
+*** Test Cases ***
+| 64B-0c-ethicmp4-ip4base-eth-1tap-scapy
+| | [Tags] | 64B | 0C
+| | frame_size=${64} | phy_cores=${0}