aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/device/interfaces
diff options
context:
space:
mode:
authorPeter Mikus <pmikus@cisco.com>2019-07-09 14:28:27 +0000
committerPeter Mikus <pmikus@cisco.com>2019-07-11 06:41:16 +0000
commitd2a7114de8c307c152b119d2c153e1d75df78b65 (patch)
tree84c183646a63fedbaf03cbbb5d824219e4d5aff8 /tests/vpp/device/interfaces
parent7b0e8a9dee0f874c4b7317e9132064dbab8fd34a (diff)
Aligning FUNC/PERF keywords - Data driven
Change-Id: I233c8908c724556db09c60de6efa9237068fb4c3 Signed-off-by: Peter Mikus <pmikus@cisco.com>
Diffstat (limited to 'tests/vpp/device/interfaces')
-rw-r--r--tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot95
-rw-r--r--tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev.robot (renamed from tests/vpp/device/interfaces/eth2p-ethip4-ip4base-eth-1tap-dev.robot)62
-rw-r--r--tests/vpp/device/interfaces/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev.robot (renamed from tests/vpp/device/interfaces/eth2p-eth-l2bdbasemaclrn-eth-2tap-dev.robot)29
3 files changed, 137 insertions, 49 deletions
diff --git a/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
new file mode 100644
index 0000000000..066821c276
--- /dev/null
+++ b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-dev.robot
@@ -0,0 +1,95 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | 1TAP
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test | namespace
+| Test Teardown | Tear down test | packet_trace | namespace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *Tap Interface Traffic Tests*
+| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
+| ... | between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of
+| ... | IPv4.
+| ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with L2
+| ... | bridge-domain (L2BD) MAC learning enabled; Split Horizon Groups (SHG)
+| ... | are set depending on test case; Namespaces (NM)
+| ... | are set on DUT1 with attached linux-TAP.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets
+| ... | are sent by TG on link to DUT1; On receipt TG verifies packets
+| ... | for correctness and their IPv4 src-addr, dst-addr, and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:*
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${0}
+| ${tap1_VPP_ip}= | 16.0.10.1
+| ${tap1_NM_ip}= | 16.0.10.2
+| ${tap1_NM_mac}= | 02:00:00:00:00:02
+| ${dut_ip_address}= | 192.168.0.1
+| ${tg_ip_address}= | 192.168.0.2
+| ${tg_ip_address_GW}= | 192.168.0.0
+| ${prefix}= | 24
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\
+| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP.
+| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\
+| | ... | received on TG.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Set interfaces in path up
+| | ${int1}= | And Add Tap Interface | ${dut1} | tap0
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${int1} | ${tap1_VPP_ip} | ${prefix}
+| | And VPP Interface Set IP Address
+| | ... | ${dut1} | ${dut1_if1} | ${dut_ip_address} | ${prefix}
+| | And Set Interface State | ${dut1} | ${int1} | up
+| | And Set Linux Interface MAC | ${dut1} | tap0 | ${tap1_NM_mac}
+| | And Set Linux Interface IP | ${dut1} | tap0 | ${tap1_NM_ip} | ${prefix}
+| | And Add Linux Route
+| | ... | ${dut1} | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip}
+| | And VPP Add IP Neighbor
+| | ... | ${dut1} | ${dut1_if1} | ${tg_ip_address} | ${tg_if1_mac}
+| | And VPP Add IP Neighbor
+| | ... | ${dut1} | ${int1} | ${tap1_NM_ip} | ${tap1_NM_mac}
+| | Then Send ICMP echo request and verify answer
+| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac} | ${tg_if1_mac}
+| | ... | ${tap1_NM_ip} | ${tg_ip_address}
+
+*** Test Cases ***
+| tc01-64B-eth2p-ethicmpv4-ip4base-eth-1tap-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/interfaces/eth2p-ethip4-ip4base-eth-1tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev.robot
index 4d7f189da4..b0cacd1f24 100644
--- a/tests/vpp/device/interfaces/eth2p-ethip4-ip4base-eth-1tap-dev.robot
+++ b/tests/vpp/device/interfaces/eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev.robot
@@ -15,12 +15,14 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | TAP
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE | 1TAP | NAMESPACE
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test | namespace
| Test Teardown | Tear down test | packet_trace | namespace
| ...
+| Test Template | Local Template
+| ...
| Documentation | *Tap Interface Traffic Tests*
| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
| ... | between nodes.
@@ -47,41 +49,8 @@
| ${tg_ip_address_GW}= | 192.168.0.0
| ${prefix}= | 24
-*** Test Cases ***
-| tc01-eth2p-ethicmpv4-ip4base-dev_tap-no-namespace
-| | [Documentation]
-| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\
-| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP.
-| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\
-| | ... | received on TG.
-| | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Set interfaces in path up
-| | ${int1}= | And Add Tap Interface | ${dut1} | tap0
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${int1} | ${tap1_VPP_ip} | ${prefix}
-| | And VPP Interface Set IP Address
-| | ... | ${dut1} | ${dut1_if1} | ${dut_ip_address} | ${prefix}
-| | And Set Interface State | ${dut1} | ${int1} | up
-| | And Set Linux Interface MAC | ${dut1} | tap0 | ${tap1_NM_mac}
-| | And Set Linux Interface IP | ${dut1} | tap0 | ${tap1_NM_ip} | ${prefix}
-| | And Add Linux Route
-| | ... | ${dut1} | ${tg_ip_address_GW} | ${prefix} | ${tap1_VPP_ip}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1} | ${dut1_if1} | ${tg_ip_address} | ${tg_if1_mac}
-| | And VPP Add IP Neighbor
-| | ... | ${dut1} | ${int1} | ${tap1_NM_ip} | ${tap1_NM_mac}
-| | Then Send ICMP echo request and verify answer
-| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac} | ${tg_if1_mac}
-| | ... | ${tap1_NM_ip} | ${tg_ip_address}
-
-| tc02-eth2p-ethicmpv4-ip4base-dev_tap-namespace
+*** Keywords ***
+| Local Template
| | [Documentation]
| | ... | [Cfg] On DUT1 configure two interface addresses with IPv4 of which\
| | ... | one is TAP interface (dut_to_tg_if and TAP) and one is linux-TAP in\
@@ -89,13 +58,19 @@
| | ... | [Ver] Packet sent from TG gets to the destination and ICMP-reply is\
| | ... | received on TG.
| | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Given Add PCI devices to all DUTs
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Set interfaces in path up
| | ${int1}= | And Add Tap Interface | ${dut1} | tap0
| | And VPP Interface Set IP Address
@@ -118,3 +93,8 @@
| | Then Send ICMP echo request and verify answer
| | ... | ${tg} | ${tg_if1} | ${dut1_if1_mac} | ${tg_if1_mac}
| | ... | ${tap1_NM_ip} | ${tg_ip_address}
+
+*** Test Cases ***
+| tc01-64B-eth2p-ethicmpv4-ip4base-eth-1tap-namespace-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/interfaces/eth2p-eth-l2bdbasemaclrn-eth-2tap-dev.robot b/tests/vpp/device/interfaces/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev.robot
index 3e7fd03e89..0c97d983bc 100644
--- a/tests/vpp/device/interfaces/eth2p-eth-l2bdbasemaclrn-eth-2tap-dev.robot
+++ b/tests/vpp/device/interfaces/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev.robot
@@ -15,12 +15,14 @@
| Resource | resources/libraries/robot/shared/default.robot
| ...
| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2BD | BASE | TAP
+| ... | NIC_Virtual | ETH | L2BD | BASE | 2TAP
| ...
| Suite Setup | Setup suite single link | scapy
| Test Setup | Setup test | namespace
| Test Teardown | Tear down test | packet_trace | namespace | linux_bridge
| ...
+| Test Template | Local Template
+| ...
| Documentation | *Tap Interface Traffic Tests*
| ...
| ... | *[Top] Network Topologies:* TG=DUT1 2-node topology with two links
@@ -42,19 +44,25 @@
| ${overhead}= | ${0}
| ${bid_TAP}= | tapBr
-*** Test Cases ***
-| tc01-eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev_tap-simple-bd
+*** Keywords ***
+| Local Template
| | [Documentation]
| | ... | [Ver] Packet sent from TG is passed through all L2BD and received\
| | ... | back on TG. Then src_ip, dst_ip and MAC are checked.
| | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
| | ...
-| | Given Add PCI devices to all DUTs
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
| | When Set interfaces in path up
| | ${int1}= | And Add Tap Interface | ${dut1} | tap0
| | ${int2}= | And Add Tap Interface | ${dut1} | tap1
@@ -69,3 +77,8 @@
| | And Add interface to bridge domain | ${dut1} | ${dut1_if2} | 19 | 0
| | Then Send ICMP packet and verify received packet
| | ... | ${tg} | ${tg_if1} | ${tg_if2}
+
+*** Test Cases ***
+| tc01-eth2p-ethicmpv4-l2bdbasemaclrn-eth-2tap-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}