vpp_device: Multiple NICs (suitegen)

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c

1 files changed, 83 insertions, 0 deletions

diff --git a/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot
new file mode 100644
index 0000000000..7da5a2b127
--- /dev/null
+++ b/tests/vpp/device/ip4/2n1l-10ge2p1x710-ethip4-ip4base-scapy.robot
@@ -0,0 +1,83 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+|
+| Test Template | Local Template
+|
+| Documentation | *IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both \
+| ... | links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
+| ... | two static IPv4 /24 route entries.
+| ... | *[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent \
+| ... | in one direction by TG on links to DUT1; on receive TG verifies packet \
+| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${0}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\
+| | ... | Make TG verify IPv4 packet is correct.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize IPv4 forwarding in circular topology
+| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2
+| | Then Send packet and verify headers
+| | ... | ${tg} | 192.168.0.1 | 192.168.0.2
+| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
+
+*** Test Cases ***
+| 64B-0c-ethip4-ip4base-scapy
+| | [Tags] | 64B | 0C
+| | frame_size=${64} | phy_cores=${0}