vpp_device: Multiple NICs (suitegen)

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c

1 files changed, 0 insertions, 83 deletions

diff --git a/tests/vpp/device/ip4/eth2p-ethipv4-ip4base-dev.robot b/tests/vpp/device/ip4/eth2p-ethipv4-ip4base-dev.robot
deleted file mode 100644
index c96fc9df93..0000000000
--- a/tests/vpp/device/ip4/eth2p-ethipv4-ip4base-dev.robot
+++ /dev/null
@@ -1,83 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | ETH | IP4FWD | BASE | IP4BASE | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethipv4-ip4base
-|
-| Suite Setup | Setup suite topology interfaces | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-|
-| Test Template | Local Template
-|
-| Documentation | *IPv4 routing test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both \
-| ... | links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | two static IPv4 /24 route entries.
-| ... | *[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent \
-| ... | in one direction by TG on links to DUT1; on receive TG verifies packet \
-| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${overhead}= | ${0}
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Ver] Make TG send IPv4 packet routed over DUT1 interfaces.\
-| | ... | Make TG verify IPv4 packet is correct.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Initialize IPv4 forwarding in circular topology
-| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2
-| | Then Send packet and verify headers
-| | ... | ${tg} | 192.168.0.1 | 192.168.0.2
-| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
-| | ... | ${TG_pf2}[0] | ${DUT1_vf2_mac}[0] | ${TG_pf2_mac}[0]
-
-*** Test Cases ***
-| 64B-ethipv4-ip4base-dev
-| | [Tags] | 64B
-| | frame_size=${64} | phy_cores=${0}