Aligning FUNC/PERF keywords - Data driven

Change-Id: I233c8908c724556db09c60de6efa9237068fb4c3
Signed-off-by: Peter Mikus <pmikus@cisco.com>

5 files changed, 287 insertions, 112 deletions

diff --git a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dut-egress-dev.robot b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dut-egress-dev.robot
new file mode 100644
index 0000000000..4f2484c93e
--- /dev/null
+++ b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dut-egress-dev.robot
@@ -0,0 +1,71 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
+| ... | both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
+| ... | two static IPv4 /24 route entries.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
+| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
+| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${0}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send ICMPv4 Echo Req towards DUT1 egress interface.\
+| | ... | Make TG verify ICMP Echo Reply is correct.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize IPv4 forwarding in circular topology
+| | Then Send IPv4 ping packet and verify headers
+| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if2}
+| | ... | 10.10.10.2 | 20.20.20.1 | ${dut1_if1_mac} | ${0}
+
+*** Test Cases ***
+| tc01-64B-eth2p-ethicmpv4-ip4base-dut-egress-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dut-ingress-dev.robot b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dut-ingress-dev.robot
new file mode 100644
index 0000000000..8bccc20372
--- /dev/null
+++ b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-dut-ingress-dev.robot
@@ -0,0 +1,71 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
+| ... | both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
+| ... | two static IPv4 /24 route entries.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
+| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
+| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${0}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send ICMPv4 Echo Req to DUT1 ingress interface.\
+| | ... | Make TG verify ICMP Echo Reply is correct.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize IPv4 forwarding in circular topology
+| | Then Send IPv4 ping packet and verify headers
+| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if1}
+| | ... | 10.10.10.2 | 10.10.10.1 | ${dut1_if1_mac} | ${0}
+
+*** Test Cases ***
+| tc01-64B-eth2p-ethicmpv4-ip4base-dut-ingress-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-tg-ingress-dev.robot b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-tg-ingress-dev.robot
new file mode 100644
index 0000000000..cc7ce61075
--- /dev/null
+++ b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-tg-ingress-dev.robot
@@ -0,0 +1,72 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
+| ... | both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
+| ... | two static IPv4 /24 route entries.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
+| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
+| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${0}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across DUT1\
+| | ... | for locally connected IPv4 addresses. Make TG verify ICMPv4 Echo\
+| | ... | Replies are correct.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize IPv4 forwarding in circular topology
+| | Then Send IPv4 ping packet and verify headers
+| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2}
+| | ... | 10.10.10.2 | 20.20.20.2 | ${dut1_if1_mac} | ${1}
+
+*** Test Cases ***
+| tc01-64B-eth2p-ethicmpv4-ip4base-tg-ingress-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-tg-ingress-for-remote-host-dev.robot b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-tg-ingress-for-remote-host-dev.robot
new file mode 100644
index 0000000000..334db8359a
--- /dev/null
+++ b/tests/vpp/device/ip4/eth2p-ethicmpv4-ip4base-tg-ingress-for-remote-host-dev.robot
@@ -0,0 +1,73 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *IPv4 routing test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
+| ... | both links.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
+| ... | two static IPv4 /24 route entries.
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
+| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
+| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${0}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across DUT1\
+| | ... | for remote host IPv4 addresses. Make TG verify ICMPv4 Echo Replies\
+| | ... | are correct.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize IPv4 forwarding in circular topology
+| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2
+| | Then Send IPv4 ping packet and verify headers
+| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2}
+| | ... | 192.168.0.1 | 192.168.0.2 | ${dut1_if1_mac} | ${1}
+
+*** Test Cases ***
+| tc01-64B-eth2p-ethicmpv4-ip4base-tg-ingress-for-remote-host-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot b/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot
deleted file mode 100644
index f9b6ebf314..0000000000
--- a/tests/vpp/device/ip4/eth2p-ethip4-ip4base-dev.robot
+++ /dev/null
@@ -1,112 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP4FWD | BASE | IP4BASE
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-| ...
-| Documentation | *IPv4 routing test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
-| ... | both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
-| ... | two static IPv4 /24 route entries.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
-| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
-| ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${nic_name}= | virtual
-| ${overhead}= | ${0}
-
-*** Test Cases ***
-| tc01-eth2p-ethicmpv4-ip4base-dev_echo-req-to-dut-ingress-interface
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Req to DUT1 ingress interface.\
-| | ... | Make TG verify ICMP Echo Reply is correct.
-| | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize IPv4 forwarding in circular topology
-| | Then Send IPv4 ping packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if1}
-| | ... | 10.10.10.2 | 10.10.10.1 | ${dut1_if1_mac} | ${0}
-
-| tc02-eth2p-ethicmpv4-ip4base-dev_echo-req-to-dut-egress-interface
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Req towards DUT1 egress interface.\
-| | ... | Make TG verify ICMP Echo Reply is correct.
-| | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize IPv4 forwarding in circular topology
-| | Then Send IPv4 ping packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if2}
-| | ... | 10.10.10.2 | 20.20.20.1 | ${dut1_if1_mac} | ${0}
-
-| tc03-eth2p-ethicmpv4-ip4base-dev_echo-req-to-tg-interface-for-local-ipv4-address
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across DUT1\
-| | ... | for locally connected IPv4 addresses. Make TG verify ICMPv4 Echo\
-| | ... | Replies are correct.
-| | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize IPv4 forwarding in circular topology
-| | Then Send IPv4 ping packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2}
-| | ... | 10.10.10.2 | 20.20.20.2 | ${dut1_if1_mac} | ${1}
-
-| tc04-eth2p-ethicmpv4-ip4base-dev_echo-req-to-tg-interface-for-remote-host-ipv4-address
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces across DUT1\
-| | ... | for remote host IPv4 addresses. Make TG verify ICMPv4 Echo Replies\
-| | ... | are correct.
-| | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize IPv4 forwarding in circular topology
-| | ... | remote_host1_ip=192.168.0.1 | remote_host2_ip=192.168.0.2
-| | Then Send IPv4 ping packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2}
-| | ... | 192.168.0.1 | 192.168.0.2 | ${dut1_if1_mac} | ${1}