vpp_device: Multiple NICs (suitegen)

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c

1 files changed, 84 insertions, 0 deletions

diff --git a/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot
new file mode 100644
index 0000000000..5f2cfae9db
--- /dev/null
+++ b/tests/vpp/device/ip4_tunnels/2n1l-10ge2p1x710-ethip4vxlan-l2xcbase-scapy.robot
@@ -0,0 +1,84 @@
+# Copyright (c) 2021 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Intel-X710 | L2XCBASE | ENCAP | VXLAN | L2OVRLAY | IP4UNRLAY
+| ... | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4vxlan-l2xcbase
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+|
+| Test Template | Local Template
+|
+| Documentation | *L2XC with VXLANoIPv4 test cases*
+|
+| ... | *[Top] Network topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet encapsulations:* Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 on\
+| ... | TG-DUT.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect.\
+| ... | VXLAN tunnels are configured on links betwen TG and DUT.
+| ... | *[Ver] TG verification:* Test Eth-IPv4-VXLAN-Eth-IPv4-ICMPv4 packet is\
+| ... | sent by TG on link to DUT1; on receive TG verifies packets for\
+| ... | correctness and their IPv4 src-addr, dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC7348.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | Intel-X710
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${50}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Ver] Make TG send VXLAN encapsulated Ethernet frame; verify\
+| | ... | all packets are received.
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize layer ip4vxlan
+| | And Initialize L2 cross connect
+| | Then Send VXLAN encapsulated packet and verify received packet
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${TG_pf1_mac}[0] | ${DUT1_vf1_mac}[0]
+| | ... | 172.17.0.2 | 172.16.0.1 | ${0} | 172.26.0.1 | 172.27.0.2 | ${0}
+
+*** Test Cases ***
+| 64B-0c-ethip4vxlan-l2xcbase-scapy
+| | [Tags] | 64B | 0C
+| | frame_size=${64} | phy_cores=${0}