LISP: 3-node (func) to 2-node (dev) converstion

Change-Id: I0fbe4d9ef1b30a1ac1382ea43b5b52aeb8a7d39f
Signed-off-by: Nidhy <nidhyanandhan.a@hcl.com>

1 files changed, 85 insertions, 0 deletions

diff --git a/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot
new file mode 100644
index 0000000000..402bfbfee2
--- /dev/null
+++ b/tests/vpp/device/ip4_tunnels/lisp/eth2p-ethip4lispgpe-ip6base-dev.robot
@@ -0,0 +1,85 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+# import additional Lisp settings from resource file
+| Variables | resources/test_data/lisp/lisp.py
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | IP4FWD | LISPGPE_IP6o4
+| ...
+| Suite Setup | Setup suite single link | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local Template
+| ...
+| Documentation | *ip4-lispgpe-ip6 encapsulation test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG(if1)-DUT1-TG(if2) 2-node\
+| ... | circular topology with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-LISPGPE-IPv6-ICMPv6\
+| ... | on DUT1-TG(if2),Eth-IPv6-ICMPv6 on TG-DUTn for IPv6\
+| ... | routing over LISPoIPv4 tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 and TG(if2) are configured\
+| ... | with IPv6 routing and static routes. LISPoIPv4 tunnel is\
+| ... | configured between DUT1 and TG(if2).
+| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets\
+| ... | are sent in if1 by TG on links to DUT1; on receive\
+| ... | TG verifies packets for correctness and their IPv6 src-addr,\
+| ... | dst-addr and MAC addresses.
+| ... | *[Ref] Applicable standard specifications:* RFC6830.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${54}
+| ${ot_mode}= | 6to4
+| ${is_gpe}= | ${1}
+
+*** Keywords ***
+| Local Template
+| | [Documentation]
+| | ... | [Cfg] On DUT1 configure LISPGPE\
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
+| | And Set Max Rate And Jumbo And Handle Multi Seg
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Configure topology for IPv6 LISPoIP4 testing
+| | And Vpp All RA Suppress Link Layer | ${nodes}
+| | And Configure LISP in 2-node circular topology
+| | ... | ${dut1} | ${dut1_if2} | ${NONE}
+| | ... | ${duts_locator_set} | ${dut1_ip6o4_eid}
+| | ... | ${dut1_ip6o4_static_adjacency} | ${is_gpe}
+| | Then Send packet and verify LISPoTunnel encap
+| | ... | ${tg} | ${tg_if1_ip6} | ${dst_ip6}
+| | ... | ${tg_if1} | ${tg_if1_mac} | ${dut1_if1_mac}
+| | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
+| | ... | ${src_rloc4} | ${dst_rloc4} | ${ot_mode}
+
+*** Test Cases ***
+| tc01-62B-ethip4lispgpe-ip6base-dev
+| | [Tags] | 62B
+| | frame_size=${62} | phy_cores=${0}