Aligning FUNC/PERF keywords - Data driven

Change-Id: I233c8908c724556db09c60de6efa9237068fb4c3
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 0 insertions, 112 deletions

diff --git a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-dev.robot b/tests/vpp/device/ip6/eth2p-ethip6-ip6base-dev.robot
deleted file mode 100644
index 2dda6e054c..0000000000
--- a/tests/vpp/device/ip6/eth2p-ethip6-ip6base-dev.robot
+++ /dev/null
@@ -1,112 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | IP6FWD | BASE | IP6BASE
-| ...
-| Suite Setup | Setup suite single link | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace
-| ...
-| Documentation | *IPv6 routing test cases*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
-| ... | with single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 for IPv6 routing on \
-| ... | both links.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
-| ... | two static IPv6 /64 route entries.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in \
-| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
-| ... | for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${nic_name}= | virtual
-| ${overhead}= | ${0}
-
-*** Test Cases ***
-| tc01-eth2p-ethicmpv6-ip6base-dev_echo-req-to-dut-ingress-interface
-| | [Documentation]
-| | ... | [Ver ]Make TG send ICMPv6 Echo Req to DUT1 ingress interface.\
-| | ... | Make TG verify ICMPv6 Echo Reply is correct.
-| | ...
-| | Set Test Variable | ${frame_size} | ${62}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize IPv6 forwarding in circular topology
-| | Then Send IPv6 echo request packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if1}
-| | ... | 2001:1::2 | 2001:1::1 | ${dut1_if1_mac} | ${0}
-
-| tc02-eth2p-ethicmpv6-ip6base-dev_echo-req-to-dut-egress-interface
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv6 Echo Req towards DUT1 egress interface.\
-| | ... | Make TG verify ICMPv6 Echo Reply is correct.
-| | ...
-| | Set Test Variable | ${frame_size} | ${62}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize IPv6 forwarding in circular topology
-| | Then Send IPv6 echo request packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${dut1} | ${dut1_if2}
-| | ... | 2001:1::2 | 2001:2::1 | ${dut1_if1_mac} | ${0}
-
-| tc03-eth2p-ethicmpv6-ip6base-dev_echo-req-to-tg-interface-for-local-ipv4-address
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
-| | ... | for locally connected IPv6 addresses. Make TG verify ICMPv6 Echo\
-| | ... | Replies are correct.
-| | ...
-| | Set Test Variable | ${frame_size} | ${62}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize IPv6 forwarding in circular topology
-| | Then Send IPv6 echo request packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2}
-| | ... | 2001:1::2 | 2001:2::2 | ${dut1_if1_mac} | ${1} | ${dut1_if2_mac}
-
-| tc04-eth2p-ethicmpv6-ip6base-dev_echo-req-to-tg-interface-for-remote-host-ipv4-address
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces across DUT1\
-| | ... | for remote host IPv6 addresses. Make TG verify ICMPv6 Echo Replies\
-| | ... | are correct.
-| | ...
-| | Set Test Variable | ${frame_size} | ${62}
-| | Set Test Variable | ${rxq_count_int} | ${1}
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize IPv6 forwarding in circular topology
-| | ... | remote_host1_ip=3ffe:5f::1 | remote_host2_ip=3ffe:5f::2
-| | Then Send IPv6 echo request packet and verify headers
-| | ... | ${tg} | ${tg_if1} | ${tg} | ${tg_if2}
-| | ... | 3ffe:5f::1 | 3ffe:5f::2 | ${dut1_if1_mac} | ${1} | ${dut1_if2_mac}