VPPD: GBP test case

Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I020cdb6ced70a9c22773dfbe1662aecd2b744d2d

1 files changed, 88 insertions, 0 deletions

diff --git a/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot b/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot
new file mode 100644
index 0000000000..dd2cb7c13d
--- /dev/null
+++ b/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot
@@ -0,0 +1,88 @@
+# Copyright (c) 2019 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| ...
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | DOT1Q | L2BDMACLRN | BASE | DRV_AVF | GBP
+| ...
+| Suite Setup | Setup suite single link | avf | scapy
+| Suite Teardown | Tear down suite | vifs
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace
+| ...
+| Test Template | Local template
+| ...
+| Documentation | *L2BD with IEEE 802.1Q and GBP test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \
+| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 .
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\
+| ... | 2 VLAN subinterfaces (VID 200 and 300),\
+| ... | 1 L2 BD with the 2 VLAN subinterfaces and a BVI,\
+| ... | 1 GBP L3 RD,\
+| ... | 1 GBP L2 BD with the L2 BD,\
+| ... | 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD,\
+| ... | 2 GBP external EP in EPG-1,\
+| ... | 2 external subnets with sclass 200 and 300,\
+| ... | Contracts allowing full communications between the 2 external subnets.\
+| ... | DUT1 tested with ${nic_name} with VF enabled.
+| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \
+| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \
+| ... | and drops as applicable.
+| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | avf_plugin.so | gbp_plugin.so
+| ... | acl_plugin.so
+| ${nic_name}= | virtual
+| ${overhead}= | ${4}
+
+*** Keywords ***
+| Local template
+| | [Documentation]
+| | ... | [Ver] Make TG send ICMPv4 Echo Reqs in both directions between two\
+| | ... | of its interfaces to be switched by DUT to and from docker; verify\
+| | ... | all packets are received.
+| | ...
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| | ...
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| | ...
+| | Set Test Variable | \${frame_size}
+| | ...
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add DPDK no PCI to all DUTs
+| | And Set Max Rate And Jumbo
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize AVF interfaces
+| | And Initialize layer interface
+| | And Initialize layer dot1q
+| | And Initialize GBP routing domains
+| | Then Send packet and verify headers
+| | ... | ${tg} | 10.10.10.2 | 20.20.20.2
+| | ... | ${tg_if1} | ${tg_if1_mac} | ba:dc:00:ff:ee:01
+| | ... | ${tg_if2} | ba:dc:00:ff:ee:01 | ${tg_if2_mac}
+| | ... | traffic_script=send_ip_check_headers
+
+*** Test Cases ***
+| tc01-64B-avf-dot1q-l2bdbasemaclrn-gbp-dev
+| | [Tags] | 64B | 1C
+| | frame_size=${64} | phy_cores=${0}