Aligning FUNC/PERF keywords - Data driven

Change-Id: I233c8908c724556db09c60de6efa9237068fb4c3
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 22 insertions, 27 deletions

diff --git a/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot b/tests/vpp/device/l2xc/eth2p-ethicmpv4-l2xcbase-dev.robot
index 31407d2ce2..24aaee8065 100644
--- a/tests/vpp/device/l2xc/eth2p-ethicmp-l2xcbase-dev.robot
+++ b/tests/vpp/device/l2xc/eth2p-ethicmpv4-l2xcbase-dev.robot
@@ -21,18 +21,19 @@
 | Test Setup | Setup test
 | Test Teardown | Tear down test | packet_trace
 | ...
+| Test Template | Local Template
+| ...
 | Documentation | *L2 cross-connect test cases*
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology \
 | ... | with single links between nodes.
 | ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6 use. Both apply to all \
-| ... | links.
+| ... | IPv4. Both apply to all links.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
 | ... | switching.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \
+| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets \
 | ... | are sent in both directions by TG on links to DUT1; on receive TG \
-| ... | verifies packets for correctness and their IPv4 (IPv6) src-addr, \
+| ... | verifies packets for correctness and their IPv4 src-addr, \
 | ... | dst-addr and MAC addresses.
 | ... | *[Ref] Applicable standard specifications:* RFC792
 
@@ -41,37 +42,31 @@
 | ${nic_name}= | virtual
 | ${overhead}= | ${0}
 
-*** Test Cases ***
-| tc01-eth2p-ethicmpv4-l2xcbase-dev
+*** Keywords ***
+| Local Template
 | | [Documentation]
 | | ... | [Ver] Make TG send ICMPv4 Echo Reqs in both directions between two\
 | | ... | of its interfaces to be switched by DUT to and from docker; verify\
 | | ... | all packets are received.
 | | ...
-| | Set Test Variable | ${frame_size} | ${42}
-| | Set Test Variable | ${rxq_count_int} | ${1}
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
 | | ...
-| | Given Add PCI devices to all DUTs
-| | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Initialize L2 xconnect in 2-node circular topology
-| | Then Send ICMPv4 bidirectionally and verify received packets
-| | ... | ${tg} | ${tg_if1} | ${tg_if2}
-
-| tc02-eth2p-ethicmpv6-l2xcbase-dev
-| | [Documentation]
-| | ... | [Ver] Make TG send ICMPv6 Echo Reqs in both directions between two\
-| | ... | of its interfaces to be switched by DUT to and from docker; verify\
-| | ... | all packets are received.
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
 | | ...
-| | Set Test Variable | ${frame_size} | ${62}
-| | Set Test Variable | ${rxq_count_int} | ${1}
+| | Set Test Variable | \${frame_size}
 | | ...
-| | Given Add PCI devices to all DUTs
+| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
+| | And Add PCI devices to all DUTs
 | | And Set Max Rate And Jumbo And Handle Multi Seg
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
 | | When Initialize L2 xconnect in 2-node circular topology
-| | Then Send ICMPv6 bidirectionally and verify received packets
+| | Then Send ICMPv4 bidirectionally and verify received packets
 | | ... | ${tg} | ${tg_if1} | ${tg_if2}
+
+*** Test Cases ***
+| tc01-64B-eth2p-ethicmpv4-l2xcbase-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}