vpp_device: Multiple NICs (suitegen)

Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c

1 files changed, 0 insertions, 123 deletions

diff --git a/tests/vpp/device/srv6/eth2p-ethip6srhip6-ip6base-srv6proxy-stat-dev.robot b/tests/vpp/device/srv6/eth2p-ethip6srhip6-ip6base-srv6proxy-stat-dev.robot
deleted file mode 100644
index 374f6fe59a..0000000000
--- a/tests/vpp/device/srv6/eth2p-ethip6srhip6-ip6base-srv6proxy-stat-dev.robot
+++ /dev/null
@@ -1,123 +0,0 @@
-# Copyright (c) 2021 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-|
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Intel-X710 | ETH | IP6FWD | FEATURE | SRv6 | SRv6_PROXY
-| ... | SRv6_PROXY_STAT | MEMIF | DOCKER | DRV_VFIO_PCI
-| ... | RXQ_SIZE_0 | TXQ_SIZE_0
-| ... | ethip6srhip6-ip6base-srv6proxy-stat
-|
-| Suite Setup | Setup suite topology interfaces | scapy
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | container
-|
-| Test Template | Local Template
-|
-| Documentation | *Segment routing over IPv6 dataplane with Static\
-| ... | SRv6 proxy test cases.*
-|
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 configure physical interface IPv6\
-| ... | addresses, static ARP record, route and IPv6 forwarding over SRv6\
-| ... | with three SIDs - Segment Routing Header inserted.
-| ... | *[Ver] TG verification:* ETH-IP6 packet is sent from TG to DUT1 in one\
-| ... | direction. Packet is received and verified for correctness on TG. Then\
-| ... | ETH-IP6-IP6 packet is sent from TG in opposite direction. Packet is\
-| ... | received and verified for correctness on TG.
-| ... | *[Ref] Applicable standard specifications:* SRv6 Network Programming -\
-| ... | draft 3.
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so | perfmon_plugin.so | memif_plugin.so
-| ... | srv6as_plugin.so
-| ${crypto_type}= | ${None}
-| ${nic_name}= | Intel-X710
-| ${nic_driver}= | vfio-pci
-| ${nic_rxq_size}= | 0
-| ${nic_txq_size}= | 0
-| ${nic_pfs}= | 2
-| ${nic_vfs}= | 0
-| ${overhead}= | ${80}
-# SIDs
-| ${dut1_sid1}= | 2002:1::
-| ${dut1_sid2}= | 2003:2::
-| ${dut1_bsid}= | 2002:1::1
-| ${dut2_sid1}= | 2002:2::
-| ${dut2_sid2}= | 2003:1::
-| ${out_sid1_1}= | 2002:3::
-| ${out_sid1_2}= | 2002:4::
-| ${out_sid2_1}= | 2003:3::
-| ${out_sid2_2}= | 2003:4::
-| ${sid_prefix}= | ${64}
-# IP settings
-| ${tg_if1_ip6_subnet}= | 2001:1::
-| ${tg_if2_ip6_subnet}= | 2001:2::
-| ${dst_addr_nr}= | ${1}
-| ${dut1_if1_ip6}= | 2001:1::1
-| ${dut1_if2_ip6}= | 2001:3::1
-| ${dut1-memif-1-if1_ip6}= | 3001:1::1
-| ${dut1-memif-1-if2_ip6}= | 3001:1::2
-| ${dut1_nh}= | 4002::
-| ${dut2_if1_ip6}= | 2001:3::2
-| ${dut2_if2_ip6}= | 2001:2::1
-| ${dut2-memif-1-if1_ip6}= | 3002:1::1
-| ${dut2-memif-1-if2_ip6}= | 3002:1::2
-| ${dut2_nh}= | 4001::
-| ${prefix}= | ${64}
-| ${mem_prefix}= | ${128}
-# Container
-| ${container_engine}= | Docker
-| ${container_chain_topology}= | chain_functional
-
-*** Keywords ***
-| Local Template
-| | [Documentation]
-| | ... | [Cfg] DUT1 is configured with IPv6 routing and static route,\
-| | ... | SR policy and steering policy for one direction and one SR\
-| | ... | behaviour (function) - End.AS - for other direction.
-| | ... | [Ver] Make TG send IPv6 packets routed over DUT1 interfaces.\
-| | ... | Make TG verify IPv6 packets are correct.
-| |
-| | ... | *Arguments:*
-| | ... | - frame_size - Framesize in Bytes in integer. Type: integer
-| | ... | - phy_cores - Number of physical cores. Type: integer
-| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
-| |
-| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
-| |
-| | Set Test Variable | \${frame_size}
-| |
-| | Given Set Max Rate And Jumbo
-| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
-| | And Pre-initialize layer driver | ${nic_driver}
-| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
-| | When Initialize layer driver | ${nic_driver}
-| | And Initialize layer interface
-| | And Start containers for test | auto_scale=${False} | pinning=${False}
-| | And Initialize SRv6 with 'static_proxy' SR-unaware Service Function
-| | Then Send IPv6 Packet and verify SRv6 encapsulation in received packet
-| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0] | ${DUT1_${int}1_mac}[0]
-| | ... | ${DUT1_${int}2_mac}[0] | ${tg_if1_ip6_subnet}2 | ${tg_if2_ip6_subnet}2
-| | ... | ${dut1_sid1} | ${dut1_sid2} | ${dut2_sid2} | ${dut2_sid1}
-| | ... | ${out_sid2_1} | ${out_sid1_1} | decap=${False}
-| | ... | tg_dstsid3=${out_sid1_2} | dut_dstsid3=${out_sid2_2}
-| | ... | static_proxy=${True}
-
-*** Test Cases ***
-| 78B-ethip6srhip6-ip6base-srv6proxy-stat-dev
-| | [Tags] | 78B
-| | frame_size=${78} | phy_cores=${0}