Refactor VPP Device VM vhost tests

* replace the current VM image with kernel img
* rework keyword usage to make it consistent with performance tests
* remove resources/libraries/robot/shared/qemu.robot as it's not used
  anywhere anymore

Change-Id: Ia5bc19e9e6ed9af031e4d9b5c0c89431fb49fd33
Signed-off-by: juraj.linkes <juraj.linkes@pantheon.tech>

1 files changed, 0 insertions, 116 deletions

diff --git a/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot
deleted file mode 100644
index 2a821a72c7..0000000000
--- a/tests/vpp/device/vm_vhost/l2bd/eth2p-eth-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot
+++ /dev/null
@@ -1,116 +0,0 @@
-# Copyright (c) 2019 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library  | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/l2/l2_bridge_domain.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| ...
-| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV
-| ... | FUNCTEST | L2BDMACLRN | BASE | ETH | VHOST | 1VM
-| ...
-| Suite Setup | Setup suite single link
-| Test Setup | Setup test
-| Test Teardown | Tear down test | packet_trace | vhost
-| ...
-| Documentation | *L2 bridge-domain test cases with vhost user interface*
-| ...
-| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
-| ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
-| ... | IPv4; Eth-IPv6-ICMPv6 for L2 switching of IPv6.
-| ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \
-| ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \
-| ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \
-| ... | configured with linux bridge interconnecting vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test ICMPv4 (or ICMPv6) Echo Request packets \
-| ... | are sent in both directions by TG on links to DUT1 via VM; on \
-| ... | receive TG verifies packets for correctness and their IPv4 (IPv6) \
-| ... | src-addr, dst-addr and MAC addresses.
-| ... | *[Ref] Applicable standard specifications:* RFC792
-
-*** Variables ***
-| @{plugins_to_enable}= | dpdk_plugin.so
-| ${nic_name}= | virtual
-| ${bd_id1}= | 1
-| ${bd_id2}= | 2
-| ${sock1}= | /tmp/sock1
-| ${sock2}= | /tmp/sock2
-
-*** Test Cases ***
-| tc01-eth2p-ethip4-l2bdbasemaclrn-eth-2vhost-1vm-device
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
-| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \
-| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two \
-| | ... | virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are \
-| | ... | switched thru DUT1 and VM in both directions and are correct on \
-| | ... | receive. [Ref]
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Configure interfaces in path up
-| | And Configure vhost interfaces for L2BD forwarding | ${dut_node}
-| | ... | ${sock1}
-| | ... | ${sock2}
-| | And Create bridge domain | ${dut_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2}
-| | ... | ${bd_id2}
-| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1}
-| | ... | ${sock2}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}
-
-| tc02-eth2p-ethip6-l2bdbasemaclrn-eth-2vhost-1vm-device
-| | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv6-ICMPv6. [Cfg] On DUT1 configure \
-| | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \
-| | ... | VM and i/f to TG; configure VM to loop pkts back betwen its two \
-| | ... | virtio i/fs. [Ver] Make TG verify ICMPv6 Echo Req pkts are \
-| | ... | switched thru DUT1 and VM in both directions and are correct on \
-| | ... | receive. [Ref]
-| | ...
-| | Given Add PCI devices to all DUTs
-| | And Apply startup configuration on all VPP DUTs
-| | And VPP Enable Traces On All Duts | ${nodes}
-| | When Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Configure interfaces in path up
-| | And Configure vhost interfaces for L2BD forwarding | ${dut_node}
-| | ... | ${sock1}
-| | ... | ${sock2}
-| | And Create bridge domain | ${dut_node} | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${bd_id1}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if1}
-| | ... | ${bd_id1}
-| | And Create bridge domain | ${dut_node} | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${bd_id2}
-| | And Add interface to bridge domain | ${dut_node} | ${vhost_if2}
-| | ... | ${bd_id2}
-| | And Configure VM for vhost L2BD forwarding | ${dut_node} | ${sock1}
-| | ... | ${sock2}
-| | Then Send ICMPv6 bidirectionally and verify received packets | ${tg_node}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if2}