FIX: do not use ping in vpp-device tests

Change-Id: Ic11f863e7ffad70d45e6e8dc39c70efc62cecc96
Signed-off-by: Jan Gelety <jgelety@cisco.com>

4 files changed, 30 insertions, 35 deletions

diff --git a/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip4/eth2p-ethipv4-ip4base-eth-2vhost-1vm-dev.robot
index ecdbc19e4b..82bcb8d20b 100644
--- a/tests/vpp/device/vm_vhost/ip4/eth2p-ethicmpv4-ip4base-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/ip4/eth2p-ethipv4-ip4base-eth-2vhost-1vm-dev.robot
@@ -27,14 +27,13 @@
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
 | ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for IPv4 routing on \
-| ... | both links.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for IPv4 routing on both links.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing and \
 | ... | two static IPv4 /24 route entries. Qemu Guest is connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP ip4 interconnecting \
 | ... | vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
-| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
+| ... | *[Ver] TG verification:* Test IPv4 packet with IP protocol=61 is sent \
+| ... | in one direction by TG on links to DUT1; on receive TG verifies packet \
 | ... | for correctness and their IPv4 src-addr, dst-addr and MAC addresses.
 | ... | *[Ref] Applicable standard specifications:* RFC791, RFC826, RFC792
 
@@ -85,6 +84,6 @@
 | | ... | ${tg_if2} | ${dut1_if2_mac} | ${tg_if2_mac}
 
 *** Test Cases ***
-| tc01-64B-ethicmp4-ip4base-eth-2vhost-1vm-dev
+| tc01-64B-ethip4-ip4base-eth-2vhost-1vm-dev
 | | [Tags] | 64B
 | | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot
index 8e4cf4e6cb..bb0fb87c46 100644
--- a/tests/vpp/device/vm_vhost/ip6/eth2p-ethicmpv6-ip6base-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/ip6/eth2p-ethipv6-ip6base-eth-2vhost-1vm-dev.robot
@@ -27,15 +27,14 @@
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
 | ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv6-ICMPv6 for IPv6 routing on \
-| ... | both links.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing on both links.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv6 routing and \
 | ... | two static IPv6 /64 route entries. Qemu Guest is connected to VPP via \
 | ... | vhost-user interfaces. Guest is running VPP ip6 interconnecting \
 | ... | vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test ICMPv6 Echo Request packets are sent in \
-| ... | one direction by TG on links to DUT1; on receive TG verifies packets \
-| ... | for correctness and their IPv6 src-addr, dst-addr and MAC addresses.
+| ... | *[Ver] TG verification:* Test IPv6 packets are sent in one direction \
+| ... | by TG on links to DUT1; on receive TG verifies packets for correctness \
+| ... | and their IPv6 src-addr, dst-addr and MAC addresses.
 | ... | *[Ref] Applicable standard specifications:* RFC2460, RFC4443, RFC4861
 
 *** Variables ***
@@ -86,6 +85,6 @@
 
 
 *** Test Cases ***
-| tc01-64B-ethicmpv6-ip6base-eth-2vhost-1vm-dev
+| tc01-64B-ethipv6-ip6base-eth-2vhost-1vm-dev
 | | [Tags] | 64B
 | | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2bd/eth2p-ethipv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot
index 6b0e4853e0..0dcacc3396 100644
--- a/tests/vpp/device/vm_vhost/l2bd/eth2p-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/l2bd/eth2p-ethipv4-l2bdbasemaclrn-eth-2vhost-1vm-dev.robot
@@ -15,7 +15,7 @@
 | Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | ICMP | VHOST | 1VM
+| ... | NIC_Virtual | ETH | L2BDMACLRN | BASE | VHOST | 1VM
 | ... | DRV_VFIO_PCI
 | ...
 | Suite Setup | Setup suite single link | scapy
@@ -28,17 +28,16 @@
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
 | ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
-| ... | IPv4.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with two L2 \
 | ... | bridge-domains (L2BD) switching combined with MAC learning enabled. \
 | ... | Qemu Guest is connected to VPP via vhost-user interfaces. Guest is \
 | ... | configured with VPP l2 cross-connect interconnecting vhost-user \
 | ... | interfaces.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
-| ... | both directions by TG on links to DUT1 via VM; on receive TG verifies \
-| ... | packets for correctness and their IPv4 src-addr, dst-addr and MAC \
-| ... | addresses.
+| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
+| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \
+| ... | and MAC addresses.
 | ... | *[Ref] Applicable standard specifications:* RFC792
 
 *** Variables ***
@@ -55,12 +54,11 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT1 configure \
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT1 configure \
 | | ... | two L2BDs with MAC learning, each with vhost-user i/f to local \
 | | ... | VM and i/f to TG; configure VPP in VM to loop pkts back betwen its \
-| | ... | two virtio i/fs. [Ver] Make TG verify ICMPv4 Echo Req pkts are \
-| | ... | switched thru DUT1 and VM in both directions and are correct on \
-| | ... | receive. [Ref]
+| | ... | two virtio i/fs. [Ver] Make TG verify IPv4 packets are switched \
+| | ... | thru DUT1 and VM in both directions and are correct on receive.
 | | ...
 | | ... | *Arguments:*
 | | ... | - frame_size - Framesize in Bytes in integer. Type: integer
@@ -82,10 +80,10 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc
 | | ... | pinning=${False}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg}
+| | Then Send IPv4 bidirectionally and verify received packets | ${tg}
 | | ... | ${tg_if1} | ${tg_if2}
 
 *** Test Cases ***
-| tc01-64B-ethicmpv4-l2bdbasemaclrn-eth-2vhost-1vm-dev
+| tc01-64B-ethipv4-l2bdbasemaclrn-eth-2vhost-1vm-dev
 | | [Tags] | 64B
 | | frame_size=${64} | phy_cores=${0}
diff --git a/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethipv4-l2xcbase-eth-2vhost-1vm-dev.robot
index c9b2e40d4f..c8ea1c5a7d 100644
--- a/tests/vpp/device/vm_vhost/l2xc/eth2p-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev.robot
+++ b/tests/vpp/device/vm_vhost/l2xc/eth2p-ethipv4-l2xcbase-eth-2vhost-1vm-dev.robot
@@ -15,7 +15,7 @@
 | Resource | resources/libraries/robot/shared/default.robot
 | ...
 | Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
-| ... | NIC_Virtual | ETH | L2XCFWD | BASE | ICMP | VHOST | 1VM | DRV_VFIO_PCI
+| ... | NIC_Virtual | ETH | L2XCFWD | BASE | VHOST | 1VM | DRV_VFIO_PCI
 | ...
 | Suite Setup | Setup suite single link | scapy
 | Test Setup | Setup test
@@ -27,16 +27,15 @@
 | ...
 | ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology with \
 | ... | VM and single links between nodes.
-| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-ICMPv4 for L2 switching of \
-| ... | IPv4.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 for L2 switching of IPv4.
 | ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 cross-connect \
 | ... | (L2XC) switching. Qemu Guest is connected to VPP via vhost-user \
 | ... | interfaces. Guest is configured with VPP l2 cross-connect \
 | ... | interconnecting vhost-user interfaces.
-| ... | *[Ver] TG verification:* Test ICMPv4 Echo Request packets are sent in \
-| ... | both directions by TG on links to DUT1 via VM; on receive TG verifies \
-| ... | packets for correctness and their IPv4 src-addr, dst-addr and MAC \
-| ... | addresses.
+| ... | *[Ver] TG verification:* Test IPv4 packets with IP protocol=61 are \
+| ... | sent in both directions by TG on links to DUT1 via VM; on receive TG \
+| ... | verifies packets for correctness and their IPv4 src-addr, dst-addr \
+| ... | and MAC addresses.
 | ... | *[Ref] Applicable standard specifications:* RFC792
 
 *** Variables ***
@@ -53,10 +52,10 @@
 *** Keywords ***
 | Local Template
 | | [Documentation]
-| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4-ICMPv4. [Cfg] On DUT configure \
+| | ... | [Top] TG=DUT=VM. [Enc] Eth-IPv4. [Cfg] On DUT configure \
 | | ... | two L2 cross-connects (L2XC), each with one untagged interface \
 | | ... | to TG and untagged i/f to local VM over vhost-user. [Ver] Make \
-| | ... | TG send ICMPv4 Echo Reqs in both directions between two of its \
+| | ... | TG send IPv4 packets in both directions between two of its \
 | | ... | i/fs to be switched by DUT to and from VM; verify all packets \
 | | ... | are received. [Ref]
 | | ...
@@ -79,10 +78,10 @@
 | | And Configure chains of NFs connected via vhost-user
 | | ... | nf_chains=${nf_chains} | nf_nodes=${nf_nodes} | vnf=vpp_chain_l2xc
 | | ... | pinning=${False}
-| | Then Send ICMPv4 bidirectionally and verify received packets | ${tg}
+| | Then Send IPv4 bidirectionally and verify received packets | ${tg}
 | | ... | ${tg_if1} | ${tg_if2}
 
 *** Test Cases ***
-| tc01-64B-ethicmpv4-l2xcbase-eth-2vhost-1vm-dev
+| tc01-64B-ethipv4-l2xcbase-eth-2vhost-1vm-dev
 | | [Tags] | 64B
 | | frame_size=${64} | phy_cores=${0}