diff options
author | pmikus <pmikus@cisco.com> | 2020-09-16 15:22:10 +0000 |
---|---|---|
committer | Peter Mikus <pmikus@cisco.com> | 2020-10-19 08:04:49 +0000 |
commit | 5764620e7a5c9f637da93b8c21a3b8f53abbdef1 (patch) | |
tree | 36314f14e00680157eacec55275d99722c8e9027 /tests/vpp/device | |
parent | f94785edae14c6b2e9bef270a633717975c35a6d (diff) |
Tests: Remove GBP
- Specs
- Tests
- Library
- TODO: PAL
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
Diffstat (limited to 'tests/vpp/device')
-rw-r--r-- | tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot | 95 |
1 files changed, 0 insertions, 95 deletions
diff --git a/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot b/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot deleted file mode 100644 index 5c10713ba0..0000000000 --- a/tests/vpp/device/l2bd/eth2p-avf-dot1q-l2bdbasemaclrn-gbp-dev.robot +++ /dev/null @@ -1,95 +0,0 @@ -# Copyright (c) 2020 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Settings *** -| Resource | resources/libraries/robot/shared/default.robot -| -| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY -| ... | NIC_Virtual | DOT1Q | L2BDMACLRN | BASE | DRV_AVF | GBP -| ... | RXQ_SIZE_0 | TXQ_SIZE_0 -| ... | avf-dot1q-l2bdbasemaclrn-gbp -| -| Suite Setup | Setup suite topology interfaces | scapy -| Suite Teardown | Tear down suite -| Test Setup | Setup test -| Test Teardown | Tear down test | packet_trace -| -| Test Template | Local template -| -| Documentation | *L2BD with IEEE 802.1Q and GBP test cases* -| -| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\ -| ... | with single links between nodes. -| ... | *[Enc] Packet Encapsulations:* Dot1q-IPv4 for L2 switching of IPv4. \ -| ... | IEEE 802.1Q tagging is applied on both links TG-DUT1 . -| ... | *[Cfg] DUT configuration:* DUT1 is configured with:\ -| ... | 2 VLAN subinterfaces (VID 200 and 300),\ -| ... | 1 L2 BD with the 2 VLAN subinterfaces and a BVI,\ -| ... | 1 GBP L3 RD,\ -| ... | 1 GBP L2 BD with the L2 BD,\ -| ... | 1 GBP EPG EPG-1 with sclass 100, the GBP L2 BD and L3 RD,\ -| ... | 2 GBP external EP in EPG-1,\ -| ... | 2 external subnets with sclass 200 and 300,\ -| ... | Contracts allowing full communications between the 2 external subnets.\ -| ... | DUT1 tested with ${nic_name} with VF enabled. -| ... | *[Ver] TG verification:* Test IPv4 packets are sent in one direction \ -| ... | by TG on link to DUT1; on receive TG verifies packets for correctness \ -| ... | and drops as applicable. -| ... | *[Ref] Applicable standard specifications:* IEEE 802.1q. - -*** Variables *** -| @{plugins_to_enable}= | avf_plugin.so | gbp_plugin.so | acl_plugin.so -| ${crypto_type}= | ${None} -| ${nic_name}= | virtual -| ${nic_driver}= | avf -| ${nic_rxq_size}= | 0 -| ${nic_txq_size}= | 0 -| ${nic_pfs}= | 2 -| ${nic_vfs}= | 1 -| ${overhead}= | ${4} - -*** Keywords *** -| Local template -| | [Documentation] -| | ... | [Ver] Make TG send IPv4 packet in one direction between two\ -| | ... | of its interfaces to be switched by DUT to and from docker.\ -| | ... | Make TG verify IPv4 packet is correct. -| | -| | ... | *Arguments:* -| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1). -| | ... | Type: integer, string -| | ... | - phy_cores - Number of physical cores. Type: integer -| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer -| | -| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None} -| | -| | Set Test Variable | \${frame_size} -| | -| | Given Set Max Rate And Jumbo -| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq} -| | And Pre-initialize layer driver | ${nic_driver} -| | And Apply startup configuration on all VPP DUTs | with_trace=${True} -| | When Initialize layer driver | ${nic_driver} -| | And Initialize layer interface -| | And Initialize layer dot1q -| | And Initialize GBP routing domains -| | Then Send packet and verify headers -| | ... | ${tg} | 10.10.10.2 | 20.20.20.2 -| | ... | ${TG_pf1}[0] | ${TG_pf1_mac}[0] | ba:dc:00:ff:ee:01 -| | ... | ${TG_pf2}[0] | ba:dc:00:ff:ee:01 | ${TG_pf2_mac}[0] -| | ... | traffic_script=send_ip_check_headers - -*** Test Cases *** -| 64B-avf-dot1q-l2bdbasemaclrn-gbp-dev -| | [Tags] | 64B | 1C -| | frame_size=${64} | phy_cores=${0} |