vpp-device: GENEVE tunnel test, l3 mode

Jira: CSIT-1769

Change-Id: I98510cd8e627d7347f77d0032b7bac28f2e36c61
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 107 insertions, 0 deletions

diff --git a/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot b/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot
new file mode 100644
index 0000000000..fe20d6dd6d
--- /dev/null
+++ b/tests/vpp/device/ip4_tunnels/eth2p-ethip4--ethip4udpgeneve-1tun-ip4base-dev.robot
@@ -0,0 +1,107 @@
+# Copyright (c) 2020 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/ip/geneve.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+|
+| Force Tags | 2_NODE_SINGLE_LINK_TOPO | DEVICETEST | HW_ENV | DCR_ENV | SCAPY
+| ... | NIC_Virtual | ETH | IP4FWD | IP4BASE | UDP | ENCAP | GENEVE
+| ... | GENEVE_L3MODE | GENEVE4_1TUN | DRV_VFIO_PCI
+| ... | RXQ_SIZE_0 | TXQ_SIZE_0
+| ... | ethip4--ethip4udpgeneve-1tun-ip4base
+|
+| Suite Setup | Setup suite topology interfaces | scapy
+| Test Setup | Setup test
+| Test Teardown | Tear down test | packet_trace | geneve4
+|
+| Test Template | Local Template
+|
+| Documentation | *L2BD with GENEVE L3 mode test cases*
+|
+| ... | *[Top] Network Topologies:* TG-DUT1-TG 2-node circular topology\
+| ... | with single links between nodes.
+| ... | *[Enc] Packet Encapsulations:* Eth-IPv4 between TG-if1 and DUT1-if1 and\
+| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 between DUT1-if2 and TG-if2 for IPv4\
+| ... | routing over GENEVE tunnel.
+| ... | *[Cfg] DUT configuration:* DUT1 is configured with IPv4 routing over\
+| ... | GENEVE tunnel and 4 static IPv4 /24 route entries.\
+| ... | DUT1 is tested with ${nic_name}.
+| ... | *[Ver] TG verification:* Test Eth-IPv4 packet is sent by TG-if1 on link\
+| ... | to DUT1-if1; on receive by TG-if2 the encapsulated packet is verified\
+| ... | for correctness and its outer and inner IPv4 and MAC addresses, UDP\
+| ... | ports and GENEVE vni and protocol number. Then test\
+| ... | Eth-IPv4-UDP-GENEVE-Eth-IPv4 packet is sent by TG-if2 on link to\
+| ... | DUT1-if2; on receive by TG-if1 decapsulated packet is verified for\
+| ... | correctness and its IPv4 and MAC addresses
+| ... | *[Ref] Applicable standard specifications:* RFC791, RFC768, RFC8926.
+
+*** Variables ***
+| @{plugins_to_enable}= | dpdk_plugin.so | geneve_plugin.so
+| ${crypto_type}= | ${None}
+| ${nic_name}= | virtual
+| ${nic_driver}= | vfio-pci
+| ${nic_rxq_size}= | 0
+| ${nic_txq_size}= | 0
+| ${nic_pfs}= | 2
+| ${nic_vfs}= | 0
+| ${overhead}= | ${0}
+# IP settings
+| ${dut1_if1_ip4}= | 20.0.0.1
+| ${dut1_if2_ip4}= | 30.0.0.1
+| ${tg_if1_ip4}= | 20.0.0.2
+| ${tg_if2_ip4}= | 30.0.0.2
+# GENEVE settings
+| ${gen_mode}= | L3
+| ${n_tunnels}= | ${1}
+| &{gen_tunnel}=
+| ... | local=1.1.1.2 | remote=1.1.1.1 | vni=${1}
+| ... | src_ip=10.128.1.0 | dst_ip=10.0.1.0 | ip_mask=${24} | if_ip=11.0.1.2
+
+*** Keywords ***
+| Local Template
+| |
+| | [Documentation]
+| | ... | [Cfg] DUT runs GENEVE ${gen_mode} mode configuration.
+| | ... | Each DUT uses ${phy_cores} physical core(s) for worker threads.
+| | ... | [Ver] Measure NDR and PDR values using MLRsearch algorithm.\
+| |
+| | ... | *Arguments:*
+| | ... | - frame_size - Framesize in Bytes in integer or string (IMIX_v4_1).
+| | ... | Type: integer, string
+| | ... | - phy_cores - Number of physical cores. Type: integer
+| | ... | - rxq - Number of RX queues, default value: ${None}. Type: integer
+| |
+| | [Arguments] | ${frame_size} | ${phy_cores} | ${rxq}=${None}
+| |
+| | Set Test Variable | \${frame_size}
+| |
+| | Given Set Max Rate And Jumbo
+| | And Add worker threads to all DUTs | ${phy_cores} | ${rxq}
+| | And Pre-initialize layer driver | ${nic_driver}
+| | And Apply startup configuration on all VPP DUTs | with_trace=${True}
+| | When Initialize layer driver | ${nic_driver}
+| | And Initialize layer interface
+| | And Initialize GENEVE L3 mode in circular topology
+| | Then Send IP packet and verify GENEVE encapsulation in received packets
+| | ... | ${tg} | ${TG_pf1}[0] | ${TG_pf2}[0]
+| | ... | ${DUT1_vf1_mac}[0] | ${DUT1_vf2_mac}[0]
+| | ... | ${gen_tunnel}[local] | ${gen_tunnel}[remote] | ${gen_tunnel}[vni]
+| | ... | ${gen_tunnel}[src_ip] | ${gen_tunnel}[dst_ip]
+| | And Show Geneve Tunnel Data | ${nodes['DUT1']}
+
+*** Test Cases ***
+| 64B-ethip4--ethip4udpgeneve-1tun-ip4base-dev
+| | [Tags] | 64B
+| | frame_size=${64} | phy_cores=${0}