CSIT-859: KW to add crypto SW device to startup.conf

Change-Id: I8441d58a2d7f604b64fff358a3cef8d72289dcdc
Signed-off-by: Jan Gelety <jgelety@cisco.com>

1 files changed, 0 insertions, 487 deletions

diff --git a/tests/vpp/func/crypto/eth2p-ethip6ipsectpt-ip6base-func.robot b/tests/vpp/func/crypto/eth2p-ethip6ipsectpt-ip6base-func.robot
deleted file mode 100644
index e36630b681..0000000000
--- a/tests/vpp/func/crypto/eth2p-ethip6ipsectpt-ip6base-func.robot
+++ /dev/null
@@ -1,487 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Resource | resources/libraries/robot/crypto/ipsec.robot
-| Library | resources.libraries.python.Trace
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | 3_NODE_DOUBLE_LINK_TOPO
-| ...        | VM_ENV | HW_ENV | SKIP_VPP_PATCH
-| Test Setup | Set up IPv6 IPSec functional test
-| ...
-| Test Teardown | Tear down IPSec functional test | ${dut_node}
-| ...
-| Documentation | *IPv6 IPsec transport mode test suite.*
-| ...
-| ... | *[Top] Network topologies:* TG-DUT1 2-node topology with one link\
-| ... | between nodes.
-| ... | *[Cfg] DUT configuration:* On DUT1 create loopback interface, configure
-| ... | loopback an physical interface IPv6 addresses, static ARP record, route
-| ... | and IPsec manual keyed connection in transport mode.
-| ... | *[Ver] TG verification:* ESP packet is sent from TG to DUT1. ESP packet
-| ... | is received on TG from DUT1.
-| ... | *[Ref] Applicable standard specifications:* RFC4303.
-
-*** Variables ***
-| ${tg_spi}= | ${1000}
-| ${dut_spi}= | ${1001}
-| ${ESP_PROTO}= | ${50}
-| ${tg_if_ip6}= | 3ffe:5f::1
-| ${dut_if_ip6}= | 3ffe:5f::2
-| ${tg_lo_ip6}= | 3ffe:60::3
-| ${dut_lo_ip6}= | 3ffe:60::4
-| ${ip6_plen}= | ${64}
-| ${ip6_plen_rt}= | ${128}
-
-*** Test Cases ***
-| TC01: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC02: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA1-96 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-192 and integrity algorithm SHA1-96 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | [Tags] | SKIP_PATCH
-| | ${encr_alg}= | Crypto Alg AES CBC 192
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC03: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA1-96 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-256 and integrity algorithm SHA1-96 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | [Tags] | SKIP_PATCH
-| | ${encr_alg}= | Crypto Alg AES CBC 256
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC04: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-256-128 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-256-128 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | [Tags] | SKIP_PATCH
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA 256 128
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC05: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-256-128 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-256-128 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | ${encr_alg}= | Crypto Alg AES CBC 192
-| | ${auth_alg}= | Integ Alg SHA 256 128
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC06: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-256-128 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-256-128 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | [Tags] | SKIP_PATCH
-| | ${encr_alg}= | Crypto Alg AES CBC 256
-| | ${auth_alg}= | Integ Alg SHA 256 128
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC07: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-384-192 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-384-192 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | [Tags] | SKIP_PATCH
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA 384 192
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC08: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-384-192 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-384-192 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | [Tags] | SKIP_PATCH
-| | ${encr_alg}= | Crypto Alg AES CBC 192
-| | ${auth_alg}= | Integ Alg SHA 384 192
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC09: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-384-192 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-384-192 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | ${encr_alg}= | Crypto Alg AES CBC 256
-| | ${auth_alg}= | Integ Alg SHA 384 192
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC10: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA-512-256 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA-512-256 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | [Tags] | SKIP_PATCH
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA 512 256
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC11: VPP process ESP packet in Transport Mode with AES-CBC-192 encryption and SHA-512-256 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-192 and integrity algorithm SHA-512-256 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | [Tags] | SKIP_PATCH
-| | ${encr_alg}= | Crypto Alg AES CBC 192
-| | ${auth_alg}= | Integ Alg SHA 512 256
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC12: VPP process ESP packet in Transport Mode with AES-CBC-256 encryption and SHA-512-256 integrity
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-256 and integrity algorithm SHA-512-256 in transport
-| | ... | mode.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node.
-| | ${encr_alg}= | Crypto Alg AES CBC 256
-| | ${auth_alg}= | Integ Alg SHA 512 256
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC13: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption alogrithms used
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\
-| | ... | mode.
-| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\
-| | ... | encryption key stored on VPP node from TG to VPP node and expect no\
-| | ... | response to be received on TG.
-| | ... | [Ref] RFC4303.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC14: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different integrity alogrithms used
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\
-| | ... | mode.
-| | ... | [Ver] Send an ESP packet authenticated by integrity key different\
-| | ... | from integrity key stored on VPP node from TG to VPP node and expect\
-| | ... | no response to be received on TG.
-| | ... | [Ref] RFC4303.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC15: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity - different encryption and integrity alogrithms used
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\
-| | ... | mode.
-| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\
-| | ... | by encryption key different from integrity and encryption keys stored\
-| | ... | on VPP node from TG to VPP node and expect no response to be received\
-| | ... | on TG.
-| | ... | [Ref] RFC4303.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto
-| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC16: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\
-| | ... | mode. Then update SA keys - use new keys.
-| | ... | [Ver] Send and receive ESP packet between TG and VPP node before\
-| | ... | and after SA keys update.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto
-| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ
-| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id}
-| | ... | ${new_encr_key} | ${new_auth_key}
-| | Then Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${new_auth_key}
-| | ... | ${tg_spi} | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC17: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption alogrithms used
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\
-| | ... | mode. Then update SA keys - use new keys.
-| | ... | [Ver] Send an ESP packet encrypted by encryption key different from\
-| | ... | encryption key stored on VPP node from TG to VPP node and expect no\
-| | ... | response to be received on TG before and after SA keys update.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto
-| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ
-| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id}
-| | ... | ${new_encr_key} | ${new_auth_key}
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${new_auth_key} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC18: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different integrity alogrithms used
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\
-| | ... | mode. Then update SA keys - use new keys.
-| | ... | [Ver] Send an ESP packet authenticated by integrity key different\
-| | ... | from integrity key stored on VPP node from TG to VPP node and expect\
-| | ... | no response to be received on TG before and after SA keys update.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto
-| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ
-| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id}
-| | ... | ${new_encr_key} | ${new_auth_key}
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${new_encr_key} | ${auth_alg} | ${auth_key2} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-| TC19: VPP process ESP packet in Transport Mode with AES-CBC-128 encryption and SHA1-96 integrity with update SA keys - different encryption and integrity alogrithms used
-| | [Documentation]
-| | ... | [Top] TG-DUT1.
-| | ... | [Ref] RFC4303.
-| | ... | [Cfg] On DUT1 configure IPsec manual keyed connection with encryption\
-| | ... | algorithm AES-CBC-128 and integrity algorithm SHA1-96 in transport\
-| | ... | mode. Then update SA keys - use new keys.
-| | ... | [Ver] Send an ESP packet authenticated by integrity key and encrypted\
-| | ... | by encryption key different from integrity and encryption keys stored\
-| | ... | on VPP node from TG to VPP node and expect no response to be received\
-| | ... | on TG before and after SA keys update.
-| | ${encr_alg}= | Crypto Alg AES CBC 128
-| | ${auth_alg}= | Integ Alg SHA1 96
-| | Given Generate keys for IPSec | ${encr_alg} | ${auth_alg}
-| | When Configure manual keyed connection for IPSec
-| | ... | ${dut_node} | ${dut_if} | ${encr_alg} | ${encr_key} | ${auth_alg}
-| | ... | ${auth_key} | ${dut_spi} | ${tg_spi} | ${dut_tun_ip} | ${tg_tun_ip}
-| | ${encr_key2}= | And Get Second Random String | ${encr_alg} | Crypto
-| | ${auth_key2}= | And Get Second Random String | ${auth_alg} | Integ
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-| | ${new_encr_key}= | Given Get Second Random String | ${encr_alg} | Crypto
-| | ${new_auth_key}= | And Get Second Random String | ${auth_alg} | Integ
-| | When Update IPSec SA keys | ${dut_node} | ${l_sa_id} | ${r_sa_id}
-| | ... | ${new_encr_key} | ${new_auth_key}
-| | Then Run Keyword And Expect Error | ESP packet Rx timeout
-| | ... | Send IPsec Packet and verify ESP encapsulation in received packet
-| | ... | ${tg_node} | ${tg_if} | ${dut_if_mac}
-| | ... | ${encr_alg} | ${encr_key2} | ${auth_alg} | ${auth_key2} | ${tg_spi}
-| | ... | ${dut_spi} | ${tg_tun_ip} | ${dut_tun_ip}
-
-*** Keywords ***
-| Get Second Random String
-| | [Arguments] | ${req_alg} | ${req_type}
-| | ${req_key_len}= | Run Keyword | Get ${req_type} Alg Key Len | ${req_alg}
-| | ${key}= | Set Variable If | '${req_type}' == 'Crypto' | ${encr_key}
-| | ... | '${req_type}' == 'Integ' | ${auth_key}
-| | :FOR | ${index} | IN RANGE | 100
-| | | ${req_key}= | Generate Random String | ${req_key_len}
-| | | Return From Keyword If | '${req_key}' != '${key}' | ${req_key}