aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot
diff options
context:
space:
mode:
authorselias <samelias@cisco.com>2017-10-09 16:36:16 +0200
committerTibor Frank <tifrank@cisco.com>2017-11-08 13:26:45 +0000
commit56dd61dee872da788e578129eed48a3158a5b566 (patch)
tree4f56e96f06f78a8180c800eceabc56ce7046b4f5 /tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot
parent2b8547bc50fd06ea936f096794b8c2a5e09c5f8b (diff)
CSIT-811 HC Test: BGP functional tests
Added traffic tests for Honeycomb's BGP feature. Change-Id: I5fa99908ab61d8bc9d2975e451917b98571b6aca Signed-off-by: selias <samelias@cisco.com>
Diffstat (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot')
-rw-r--r--tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot164
1 files changed, 0 insertions, 164 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot
deleted file mode 100644
index 290725e309..0000000000
--- a/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot
+++ /dev/null
@@ -1,164 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables ***
-# Interface to run tests on.
-| ${interface}= | ${node['interfaces']['port1']['name']}
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/bgp.robot
-| Resource | resources/libraries/robot/honeycomb/routing.robot
-| Variables | resources/test_data/honeycomb/bgp.py
-| ...
-| Suite Setup | Run Keywords
-| ... | Enable Honeycomb Feature | ${node} | BGP | AND
-| ... | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Run Keywords
-| ... | Tear Down Honeycomb Functional Test Suite | ${node} | AND
-| ... | Disable Honeycomb Feature | ${node} | BGP
-| ...
-# HONEYCOMB-409: ODL client fails to parse requests to BGP instance node
-| Force Tags | HC_FUNC | EXPECTED_FAILING
-| ...
-| Documentation | *Honeycomb BGP management test suite.*
-
-*** Test Cases ***
-| TC01: Honeycomb configures BGP peer - Internal
-| | [Documentation] | Check if Honeycomb can configure an internal BGP peer.
-| | ...
-| | When Honeycomb adds BGP peer
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | Then BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-
-| TC03: Honeycomb removes peer configuration
-| | [Documentation] | Check if Honeycomb can remove a configured BGP peer.
-| | ...
-| | Given BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | When Honeycomb removes BGP peer | ${node} | ${address_internal}
-| | Then No BGP peers should be configured | ${node}
-
-| TC02: Honeycomb updates existing BGP peer - Internal
-| | [Documentation] | Check if Honeycomb can update an existing BGP peer.
-| | ...
-| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_internal}
-| | ...
-| | Given No BGP peers should be configured | ${node}
-| | When Honeycomb adds BGP peer
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | And Honeycomb adds BGP peer
-| | ... | ${node} | ${address_internal} | ${peer_internal_update}
-| | Then BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${peer_internal_update}
-
-| TC04: Honeycomb configures BGP peer - Application
-| | [Documentation] | Check if Honeycomb can configure an application BGP peer.
-| | ...
-| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_application}
-| | ...
-| | Given No BGP peers should be configured | ${node}
-| | When Honeycomb adds BGP peer
-| | ... | ${node} | ${address_application} | ${peer_application}
-| | Then BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_application} | ${peer_application}
-
-| TC05: Honeycomb configures a second BGP peer
-| | [Documentation] | Check if Honeycomb can configure more than one BGP peer.
-| | ...
-| | [Teardown] | Run Keywords
-| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal} | AND
-| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal2}
-| | ...
-| | Given No BGP peers should be configured | ${node}
-| | When Honeycomb adds BGP peer
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | And Honeycomb adds BGP peer
-| | ... | ${node} | ${address_internal2} | ${peer_internal2}
-| | Then BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | And BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_internal2} | ${peer_internal2}
-
-| TC06: Honeycomb configures IPv4 route using BGP
-| | [Documentation] | Check if Honeycomb can configure a BGP route under a peer.
-| | ...
-| | Given Honeycomb adds BGP peer
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | When Honeycomb configures BGP route
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-| | Then BGP Route from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-
-| TC08: Honeycomb removes IPv4 route configuration
-| | [Documentation] | Check if Honeycomb can remove a configured BGP route.
-| | ...
-| | Given BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | And BGP Route from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-| | When Honeycomb removes BGP route | ${node} | ${address_internal}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-| | Then No BGP Routes Should be Configured
-| | ... | ${node} | ${address_internal} | ipv4
-
-| TC07: Honeycomb updates existing IPv4 route using BGP
-| | [Documentation] | Check if Honeycomb can update an existing BGP route.
-| | ...
-| | [Teardown] | Honeycomb removes BGP route | ${node} | ${address_internal}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-| | ...
-| | Given BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | And No BGP Routes Should be Configured
-| | ... | ${node} | ${address_internal} | ipv4
-| | When Honeycomb configures BGP route
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-| | And Honeycomb configures BGP route
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-| | Then BGP Route from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-
-| TC09: Honeycomb configures a second IPv4 route
-| | [Documentation] | Check if Honeycomb can configure more than one BGP route.
-| | ...
-| | [Teardown] | Run Keywords
-| | ... | Honeycomb removes BGP route | ${node} | ${address_internal}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 | AND
-| | ... | Honeycomb removes BGP route | ${node} | ${address_internal}
-| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4
-| | ...
-| | Given BGP peer from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${peer_internal}
-| | When Honeycomb configures BGP route
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-| | And Honeycomb configures BGP route
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2}
-| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4
-| | Then BGP Route from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
-| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
-| | And BGP Route from Honeycomb should be
-| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2}
-| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4