diff options
author | 2018-03-19 21:12:03 +0100 | |
---|---|---|
committer | 2018-03-20 08:02:57 +0000 | |
commit | 0cf1f0204e326cf93e36b344e2efd3cfa2f82870 (patch) | |
tree | 908c2261fe795bf1447e3db0529ba36192a7bced /tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-func.robot | |
parent | 26d187d5325a83edec75f5c514d350f08fe97bab (diff) |
HC Tests: move honeycomb tests out of vpp directory
https://gerrit.fd.io/r/#/c/9257/ moved VPP instalation
to vpp/func/__init__.robot,
which is run before Honeycomb suite.
Instalation process starts with removing all vpp packages,
which fails because of honeycomb dependency installed by bootstrap script.
This patch fixes HC func jobs by moving them to separate dir.
The honeycomb/func/__init__.robot was updated
to include previous content of vpp/func/__init__.robot.
HC perf jobs were also moved,
but they may require additional care (CSIT-1006).
Change-Id: I99d94272c80a4c57c85ec5cf99cddfbeab7de663
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>
Diffstat (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-func.robot')
-rw-r--r-- | tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-func.robot | 366 |
1 files changed, 0 insertions, 366 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-func.robot deleted file mode 100644 index b5fed1e583..0000000000 --- a/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-func.robot +++ /dev/null @@ -1,366 +0,0 @@ -# Copyright (c) 2017 Cisco and/or its affiliates. -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at: -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -*** Variables *** -# Interface to run tests on. -| ${interface}= | ${node['interfaces']['port1']['name']} -| ${dut1_to_tg_ip}= | 192.168.0.1 -| ${tg_to_dut1_ip}= | 192.168.0.2 -| ${dut1_to_dut2_ip}= | 192.168.1.1 -| ${dut2_to_dut1_ip}= | 192.168.1.2 -| ${bgp_port}= | ${179} -| ${bgp_as_number}= | ${37} -| ${prefix}= | ${24} - -*** Settings *** -| Library | resources.libraries.python.honeycomb.IPv6Management -| Resource | resources/libraries/robot/shared/default.robot -| Resource | resources/libraries/robot/honeycomb/honeycomb.robot -| Resource | resources/libraries/robot/honeycomb/interfaces.robot -| Resource | resources/libraries/robot/honeycomb/bgp.robot -| Resource | resources/libraries/robot/honeycomb/routing.robot -| Resource | resources/libraries/robot/shared/testing_path.robot -| Resource | resources/libraries/robot/honeycomb/ipv6_control.robot -| Variables | resources/test_data/honeycomb/bgp.py -| ... -| Suite Setup | Run Keywords -| ... | Enable Honeycomb Feature | ${node} | BGP | AND -| ... | Configure BGP Module | ${node} | ${dut1_to_tg_ip} -| ... | ${bgp_port} | ${bgp_as_number} | AND -| ... | Set Up Honeycomb Functional Test Suite | ${node} -| ... -| Suite Teardown | Run Keywords -| ... | Tear Down Honeycomb Functional Test Suite | ${nodes['DUT1']} | AND -| ... | Stop Honeycomb service on DUTs | ${nodes['DUT2']} | AND -| ... | Unconfigure IPv4 Management Interfaces | AND -| ... | Disable Honeycomb Feature | ${node} | BGP | AND -| ... | Disable Honeycomb Feature | ${nodes['DUT2']} | BGP -| ... -# HONEYCOMB-409: BGP configuration via ODL is currently not fully supported -| Force Tags | HC_FUNC | HC_REST_ONLY -| ... -| Documentation | *Honeycomb BGP management test suite.* - -*** Test Cases *** -| TC01: Honeycomb configures BGP peer - Internal -| | [Documentation] | Check if Honeycomb can configure an internal BGP peer. -| | ... -| | When Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | Then BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} - -| TC02: Honeycomb removes peer configuration -| | [Documentation] | Check if Honeycomb can remove a configured BGP peer. -| | ... -| | Given BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | When Honeycomb removes BGP peer | ${node} | ${address_internal} -| | Then No BGP peers should be configured | ${node} - -| TC03: Honeycomb updates existing BGP peer - Internal -| | [Documentation] | Check if Honeycomb can update an existing BGP peer. -| | ... -| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_internal} -| | ... -| | Given No BGP peers should be configured | ${node} -| | When Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal_update} -| | Then BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal_update} - -| TC04: Honeycomb configures BGP peer - Application -| | [Documentation] | Check if Honeycomb can configure an application BGP peer. -| | ... -| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_application} -| | ... -| | Given No BGP peers should be configured | ${node} -| | When Honeycomb adds BGP peer -| | ... | ${node} | ${address_application} | ${peer_application} -| | Then BGP peer from Honeycomb should be -| | ... | ${node} | ${address_application} | ${peer_application} - -| TC05: Honeycomb configures a second BGP peer -| | [Documentation] | Check if Honeycomb can configure more than one BGP peer. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal} | AND -| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal2} -| | ... -| | Given No BGP peers should be configured | ${node} -| | When Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal2} | ${peer_internal2} -| | Then BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal2} | ${peer_internal2} - -| TC06: Honeycomb configures IPv4 route using BGP -| | [Documentation] | Check if Honeycomb can configure a BGP route under a peer. -| | ... -| | Given Honeycomb adds BGP peer -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | When Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | Then BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 - -| TC07: Honeycomb removes IPv4 route configuration -| | [Documentation] | Check if Honeycomb can remove a configured BGP route. -| | ... -| | Given BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | When Honeycomb removes BGP route | ${node} | ${address_internal} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | Then No BGP Routes Should be Configured -| | ... | ${node} | ${address_internal} | ipv4 - -| TC08: Honeycomb updates existing IPv4 route using BGP -| | [Documentation] | Check if Honeycomb can update an existing BGP route. -| | ... -| | [Teardown] | Honeycomb removes BGP route | ${node} | ${address_internal} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | ... -| | Given BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | And No BGP Routes Should be Configured -| | ... | ${node} | ${address_internal} | ipv4 -| | When Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | And Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | Then BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 - -| TC09: Honeycomb configures a second IPv4 route -| | [Documentation] | Check if Honeycomb can configure more than one BGP route. -| | ... -| | [Teardown] | Run Keywords -| | ... | Honeycomb removes BGP route | ${node} | ${address_internal} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 | AND -| | ... | Honeycomb removes BGP route | ${node} | ${address_internal} -| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4 | AND -| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal} -| | ... -| | Given BGP peer from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${peer_internal} -| | When Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | And Honeycomb configures BGP route -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2} -| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4 -| | Then BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4} -| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 -| | And BGP Route from Honeycomb should be -| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2} -| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4 - -| TC10: Honeycomb sends BGP OPEN messages to configured peer -| | [Documentation] -| | ... | [top] TG-DUT1-TG. -| | ... | [enc] Eth-IPv4-TCP-BGP. -| | ... | [cfg] On DUT1 give Honeycomb control over the data-plane interface -| | ... | connected to TG. Configure a BGP peer with the address of TG. -| | ... | [ver] Open a TCP listener on TG on the BGP port and listen for BGP -| | ... | OPEN message. On receive, verify message fields. -| | ... -| | [Setup] | Run Keywords -| | ... | Configure BGP Module | ${node} | ${dut1_to_dut2_ip} -| | ... | ${bgp_port} | ${bgp_as_number} | AND -| | ... | Configure IPv4 Management Interface -| | [Teardown] | Honeycomb removes BGP peer | ${dut1_node} | ${address_internal} -| | When Honeycomb adds BGP peer -| | ... | ${dut1_node} | ${address_internal} | ${peer_internal} -| | Then Receive BGP OPEN message -| | ... | ${tg_node} | ${tg_to_dut1_ip} | ${dut1_to_dut2_ip} -| | ... | ${bgp_port} | ${bgp_as_number} | ${holdtime_internal} - -| TC11: Honeycomb shows connected peer in operational data -| | [Documentation] -| | ... | [top] TG-DUT1-DUT2-TG. -| | ... | [enc] Eth-IPv4-TCP-BGP. -| | ... | [cfg] On DUT1 and DUT2 give Honeycomb control over the data-plane -| | ... | interfaces connecting DUT1 ad DUT2. Configure BGP peers on DUT1 -| | ... | and DUT2 with each other's IP address. -| | ... | [ver] Using Restconf, verify that Honeycomb on each DUT has the -| | ... | other DUT's entry in operational data. -| | ... -| | When Honeycomb adds BGP peer -| | ... | ${dut1_node} | ${dut2_to_dut1_ip} | ${dut2_peer} -| | And Honeycomb adds BGP peer -| | ... | ${dut2_node} | ${dut1_to_dut2_ip} | ${dut1_peer} -| | Sleep | 5s | Wait for BGP connection. Retry timer is 5 seconds. -| | Then Peer operational data from Honeycomb should be -| | ... | ${dut1_node} | ${dut2_to_dut1_ip} -| | And Peer operational data from Honeycomb should be -| | ... | ${dut2_node} | ${dut1_to_dut2_ip} - -| TC12: Honeycomb sends IPv4 BGP route to connected peer -| | [Documentation] -| | ... | [top] TG-DUT1-DUT2-TG. -| | ... | [enc] Eth-IPv4-TCP-BGP. -| | ... | [cfg] On DUT1 and DUT2 give Honeycomb control over the data-plane -| | ... | interfaces connecting DUT1 ad DUT2. Configure BGP peers on DUT1 -| | ... | and DUT2 with each other's IP address. On DUT2 configure a static -| | ... | IPv4 route using Honeycomb's BGP module. -| | ... | [ver] Verify that the route is present in BGP -| | ... | local RIB and VPP's routing table on each DUT. -| | ... -| | Given Peer operational data from Honeycomb should be -| | ... | ${dut1_node} | ${dut2_to_dut1_ip} -| | And Peer operational data from Honeycomb should be -| | ... | ${dut2_node} | ${dut1_to_dut2_ip} -| | When Honeycomb adds BGP peer -| | ... | ${dut2_node} | ${address_application} | ${peer_application} -| | And Honeycomb configures BGP route -| | ... | ${dut2_node} | ${address_application} | ${dut1_route} -| | ... | ${dut1_route_address} | ${dut1_route_id} | ipv4 -| | And Sleep | 5s | Wait for route advertisement. Retry timer is 5 seconds. -| | Then Routing data from Honeycomb should contain -| | ... | ${dut1_node} | learned-protocol-0 | ipv4 | ${route_operational} -| | And Routing data from Honeycomb should contain -| | ... | ${dut2_node} | learned-protocol-0 | ipv4 | ${route_operational} -| | And BGP Loc-RIB table should include | ${dut1_node} | ${rib_operational} -| | And BGP Loc-RIB table should include | ${dut2_node} | ${rib_operational} - -| TC13: Honeycomb sends IPv6 BGP route to connected peer -| | [Documentation] -| | ... | [top] TG-DUT1-DUT2-TG. -| | ... | [enc] Eth-IPv4-TCP-BGP. -| | ... | [cfg] On DUT1 and DUT2 give Honeycomb control over the data-plane -| | ... | interfaces connecting DUT1 ad DUT2. Configure BGP peers on DUT1 -| | ... | and DUT2 with each other's IP address. On DUT2 configure a static -| | ... | IPv6 route using Honeycomb's BGP module. -| | ... | [ver] Verify that the route is present in BGP -| | ... | local RIB and VPP's routing table on each DUT. -| | ... -# HONEYCOMB-403: Missing writers for IPv6 BGP route -| | [Tags] | EXPECTED_FAILING -| | Given Peer operational data from Honeycomb should be -| | ... | ${dut1_node} | ${dut2_to_dut1_ip} -| | And Peer operational data from Honeycomb should be -| | ... | ${dut2_node} | ${dut1_to_dut2_ip} -| | And Honeycomb adds BGP peer -| | ... | ${dut2_node} | ${address_application} | ${peer_application} -| | And Honeycomb configures BGP route -| | ... | ${dut2_node} | ${address_application} | ${dut1_route_ip6} -| | ... | ${dut1_route_ip6_address} | ${dut1_route_ip6_id} | ipv6 -| | And Sleep | 5s | Wait for route advertisement. Retry timer is 5 seconds. -| | Then Routing data from Honeycomb should contain -| | ... | ${dut1_node} | learned-protocol-0 | ipv6 | ${route_ip6_operational} -| | And Routing data from Honeycomb should contain -| | ... | ${dut2_node} | learned-protocol-0 | ipv6 | ${route_ip6_operational} -| | And BGP Loc-RIB table should include | ${dut1_node} | ${rib_ip6_operational} -| | And BGP Loc-RIB table should include | ${dut2_node} | ${rib_ip6_operational} - -#TODO: Add tests once implemented in HC: -# IPv6 neighbor, L2VPN, L3VPN, linkstate, route reflector, and more - -*** Keywords *** -| Configure IPv4 Management Interface -| | [Documentation] | Change one of VPP's data-plane interfaces on DUT into\ -| | ... | a control-plane interface that Honeycomb can listen on. Setup IP\ -| | ... | addresses on the link, create suite variables for traffic trests, set -| | ... | static ARP entries, then restart VPP and Honeycomb to apply changes. -| | ... -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | ${interface}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg} -| | Set Suite Variable | ${interface} -| | Set Suite Variable | ${tg_node} -| | Set Suite Variable | ${dut1_node} -| | Set Suite Variable | ${dut2_node} -| | Set Suite Variable | ${dut1_to_tg} -| | Stop VPP service on DUT | ${dut1_node} -| | Stop VPP service on DUT | ${dut2_node} -| | Stop Honeycomb Service on DUTs | ${dut1_node} -| | Stop Honeycomb Service on DUTs | ${dut2_node} -| | Convert data-plane interface to control-plane -| | ... | ${dut1_node} | ${dut1_to_tg} -| | Convert data-plane interface to control-plane -| | ... | ${dut1_node} | ${dut1_to_dut2} -| | Convert data-plane interface to control-plane -| | ... | ${dut2_node} | ${dut2_to_dut1} -| | Sleep | 5sec | Wait until OS reclaims the interfaces. -| | ${tg_to_dut1_name}= | Get Interface Name by MAC -| | ... | ${tg_node} | ${tg_to_dut1_mac} -| | ${dut1_to_tg_name}= | Get Interface Name by MAC -| | ... | ${dut1_node} | ${dut1_to_tg_mac} -| | ${dut1_to_dut2_name}= | Get Interface Name by MAC -| | ... | ${dut1_node} | ${dut1_to_dut2_mac} -| | ${dut2_to_dut1_name}= | Get Interface Name by MAC -| | ... | ${dut2_node} | ${dut2_to_dut1_mac} -| | Set Suite Variable | ${dut1_to_tg_name} -| | Set Suite Variable | ${tg_to_dut1_name} -| | Set Suite Variable | ${dut1_to_dut2_name} -| | Set Suite Variable | ${dut2_to_dut1_name} -| | Set management interface address -| | ... | ${tg_node} | ${tg_to_dut1_name} -| | ... | ${tg_to_dut1_ip} | ${prefix} -| | Set management interface address -| | ... | ${dut1_node} | ${dut1_to_tg_name} -| | ... | ${dut1_to_tg_ip} | ${prefix} -| | Set management interface address -| | ... | ${dut1_node} | ${dut1_to_dut2_name} -| | ... | ${dut1_to_dut2_ip} | ${prefix} -| | Set management interface address -| | ... | ${dut2_node} | ${dut2_to_dut1_name} -| | ... | ${dut2_to_dut1_ip} | ${prefix} -| | Set Static ARP | ${tg_node} | ${dut1_to_tg_ip} | ${dut1_to_tg_mac} -| | Set Static ARP | ${dut1_node} | ${tg_to_dut1_ip} | ${tg_to_dut1_mac} -| | Set Static ARP | ${dut1_node} | ${dut2_to_dut1_ip} | ${dut2_to_dut1_mac} -| | Set Static ARP | ${dut2_node} | ${dut1_to_dut2_ip} | ${dut1_to_dut2_mac} -| | Enable Honeycomb Feature | ${dut2_node} | BGP -| | Configure BGP Module | ${dut1_node} | ${dut1_to_dut2_ip} -| | ... | ${bgp_port} | ${bgp_as_number} -| | Configure BGP Module | ${dut2_node} | ${dut2_to_dut1_ip} -| | ... | ${bgp_port} | ${bgp_as_number} -| | Start VPP service on DUT | ${dut1_node} -| | Start VPP service on DUT | ${dut2_node} -| | Configure Honeycomb service on DUTs | ${dut1_node} -| | Set Up Honeycomb Functional Test Suite | ${dut2_node} - -| Unconfigure IPv4 Management Interfaces -| | [Documentation] | Remove all IP addresses from the interface. -| | ... -| | Clear Interface Configuration | ${tg_node} | ${tg_to_dut1_name} -| | Clear Interface Configuration | ${dut1_node} | ${dut1_to_tg_name} -| | Clear Interface Configuration | ${dut1_node} | ${dut1_to_dut2_name} -| | Clear Interface Configuration | ${dut2_node} | ${dut2_to_dut1_name} - -| Set BGP Suite Variables -| | Configure path in 3-node circular topology -| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']} -| | Set Suite Variable | ${interface} -| | Set Suite Variable | ${tg_node} -| | Set Suite Variable | ${dut1_node} -| | Set Suite Variable | ${dut2_node} -| | Set Suite Variable | ${dut1_to_tg} -| | Set Suite Variable | ${dut1_to_tg_name} -| | Set Suite Variable | ${tg_to_dut1_name} -| | Set Suite Variable | ${dut1_to_dut2_name} -| | Set Suite Variable | ${dut2_to_dut1_name} |