aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
diff options
context:
space:
mode:
authorTibor Frank <tifrank@cisco.com>2017-06-20 13:57:08 +0200
committerTibor Frank <tifrank@cisco.com>2017-06-29 12:17:28 +0000
commit6721e7f09aa95bff6622068332a3f56afad9c87b (patch)
tree37ef7f40e53f740a62830ab46142aa87342dc56b /tests/vpp/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
parent859157b5db45927c7b4bb0b2d575e68805777a86 (diff)
CSIT-687: Directory structure reorganization
Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank <tifrank@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Diffstat (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot')
-rw-r--r--tests/vpp/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot293
1 files changed, 293 insertions, 0 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
new file mode 100644
index 0000000000..f0f6e4e6ad
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-intip4-intip6-apihc-apivat-func.robot
@@ -0,0 +1,293 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interface to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip6.robot
+| Variables | resources/test_data/honeycomb/interface_ip.py
+| ...
+| Force Tags | HC_FUNC
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+| Documentation | *Honeycomb interface management test suite.*
+
+*** Test Cases ***
+| TC01: Honeycomb configures and reads interface state
+| | [Documentation] | Check if Honeycomb API can modify the admin state of\
+| | ... | VPP interfaces.
+| | ...
+| | Given Interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | down
+| | And Interface state from VAT should be | ${node} | ${interface} | down
+| | When Honeycomb configures interface state | ${node} | ${interface} | up
+| | Then Interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | up
+| | And Interface state from VAT should be | ${node} | ${interface} | up
+| | When Honeycomb configures interface state | ${node} | ${interface} | down
+| | Then Interface state from Honeycomb should be
+| | ... | ${node} | ${interface} | down
+| | And Interface state from VAT should be | ${node} | ${interface} | down
+
+| TC02: Honeycomb modifies interface IPv4 address with netmask
+| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\
+| | ... | with address and netmask provided.
+| | ...
+| | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface}
+| | And ipv4 address from VAT should be empty | ${node} | ${interface}
+| | When Honeycomb sets interface IPv4 address | ${node} | ${interface}
+| | ... | ${ipv4_address} | ${ipv4_mask}
+| | Then IPv4 address from Honeycomb should be
+| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${node} | ${interface} | ${ipv4_address}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+
+| TC03: Honeycomb removes IPv4 address from interface
+| | [Documentation] | Check if Honeycomb API can remove configured ipv4\
+| | ... | addresses from interface.
+| | ...
+| | Given IPv4 address from Honeycomb should be
+| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${node} | ${interface} | ${ipv4_address}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+| | When Honeycomb removes interface IPv4 addresses | ${node} | ${interface}
+| | Then IPv4 address from Honeycomb should be empty | ${node} | ${interface}
+| | And ipv4 address from VAT should be empty | ${node} | ${interface}
+
+| TC04: Honeycomb modifies interface IPv4 address with prefix
+| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv4\
+| | ... | with address and prefix provided.
+| | ...
+| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node}
+| | ... | ${interface}
+| | ...
+| | Given IPv4 address from Honeycomb should be empty | ${node} | ${interface}
+| | And ipv4 address from VAT should be empty | ${node} | ${interface}
+| | When Honeycomb sets interface IPv4 address with prefix
+| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix}
+| | Then IPv4 address from Honeycomb should be
+| | ... | ${node} | ${interface} | ${ipv4_address2} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${node} | ${interface} | ${ipv4_address2}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+
+| TC05: Honeycomb modifies IPv4 neighbor table
+| | [Documentation] | Check if Honeycomb API can add and remove ARP entries.
+| | ...
+| | [Teardown] | Honeycomb clears all interface IPv4 neighbors
+| | ... | ${node} | ${interface}
+| | ...
+| | Given IPv4 neighbor from Honeycomb should be empty
+| | ... | ${node} | ${interface}
+| | When Honeycomb adds interface IPv4 neighbor
+| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac}
+| | Then IPv4 neighbor from Honeycomb should be
+| | ... | ${node} | ${interface} | ${ipv4_neighbor} | ${neighbor_mac}
+
+| TC06: Honeycomb modifies interface configuration - IPv6
+| | [Documentation] | Check if Honeycomb API can configure interfaces for ipv6.
+| | ...
+| | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node}
+| | ... | ${interface}
+| | ...
+| | Given IPv6 address from Honeycomb should be empty
+| | ... | ${node} | ${interface}
+| | And IPv6 address from VAT should be empty
+| | ... | ${node} | ${interface}
+| | When Honeycomb sets interface IPv6 address
+| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix}
+| | Then IPv6 address from Honeycomb should contain
+| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix}
+| | And IPv6 address from VAT should contain
+| | ... | ${node} | ${interface} | ${ipv6_address} | ${ipv6_prefix}
+
+| TC07: Honeycomb modifies IPv6 neighbor table
+| | [Documentation] | Check if Honeycomb API can add and remove ARP entries.
+| | ...
+| | [Teardown] | Honeycomb clears all interface IPv6 neighbors
+| | ... | ${node} | ${interface}
+| | ...
+| | Given IPv6 neighbor from Honeycomb should be empty
+| | ... | ${node} | ${interface}
+| | When Honeycomb adds interface IPv6 neighbor
+| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac}
+| | Then IPv6 neighbor from Honeycomb should be
+| | ... | ${node} | ${interface} | ${ipv6_neighbor} | ${neighbor_mac}
+
+| TC08: Honeycomb modifies interface configuration - MTU
+| | [Documentation] | Check if Honeycomb API can configure interface\
+| | ... | MTU value.
+| | ...
+| | When Honeycomb sets interface ethernet configuration
+| | ... | ${node} | ${interface} | ${ethernet}
+| | Then Interface ethernet Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${interface} | ${ethernet}
+| | And Interface ethernet Operational Data From VAT Should Be
+| | ... | ${node} | ${interface} | ${ethernet['mtu']}
+
+| TC09: Honeycomb modifies interface configuration - vrf
+| | [Documentation] | Check if Honeycomb API can configure interface\
+| | ... | vrf ID.
+| | ...
+| | [Teardown] | Honeycomb sets interface VRF ID
+| | ... | ${node} | ${interface} | ${0} | ipv4
+| | ...
+| | When Honeycomb sets interface VRF ID
+| | ... | ${node} | ${interface} | ${1} | ipv4
+| | Then Interface VRF ID from Honeycomb should be
+| | ... | ${node} | ${interface} | ${1} | ipv4
+| | And Interface VRF ID from VAT should be
+| | ... | ${node} | ${interface} | ${1}
+
+| TC10: Honeycomb can configure multiple IP addresses on one interface
+| | [Documentation] | [Top] TG=DUT1=TG.
+| | ... | [Enc] Eth-IPv4-ICMP; Eth-IPv6-ICMPv6
+| | ... | [Cfg] (Using Honeycomb API) On DUT1 set two IPv4 addresses\
+| | ... | and two IPv6 addresses on first interfaces to TG and add ARP entries\
+| | ... | for each address.
+| | ... | [Ver] Send ICMP packets from TG to DUT, using different sets\
+| | ... | of source and destination IP addresses. Receive an ICMP reply\
+| | ... | for every packet sent.
+| | ...
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | When Honeycomb sets interface IPv4 address with prefix
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address} | ${ipv4_prefix}
+| | And Honeycomb adds interface IPv4 address
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address2} | ${ipv4_prefix}
+| | And Honeycomb sets interface IPv6 address
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address} | ${ipv6_prefix}
+| | And Honeycomb adds interface IPv6 address
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address2} | ${ipv6_prefix}
+| | Then IPv4 address from Honeycomb should be
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv4_address}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+| | And IPv6 address from Honeycomb should contain
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address} | ${ipv6_prefix}
+| | And IPv6 address from VAT should contain
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${ipv6_address} | ${ipv6_prefix}
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${ipv4_neighbor} | ${neighbor_mac}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${ipv4_neighbor2} | ${neighbor_mac2}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${ipv6_neighbor} | ${neighbor_mac}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${ipv6_neighbor2} | ${neighbor_mac2}
+| | And Suppress ICMPv6 router advertisement message | ${nodes}
+| | Then Ping and Verify IP address | ${nodes['TG']}
+| | ... | ${ipv4_neighbor} | ${ipv4_address}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac}
+| | And Ping and Verify IP address | ${nodes['TG']}
+| | ... | ${ipv4_neighbor2} | ${ipv4_address2}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac}
+| | And Ping and Verify IP address | ${nodes['TG']}
+| | ... | ${ipv6_neighbor} | ${ipv6_address}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac}
+| | And Ping and Verify IP address | ${nodes['TG']}
+| | ... | ${ipv6_neighbor2} | ${ipv6_address2}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
+| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac}
+
+| TC11: Honeycomb can configure unnumbered interface
+| | [Documentation] | Check if Honeycomb can configure an unnumbered interface\
+| | ... | on a physical interface, borrowing the IP address of 'local0'.
+| | ...
+| | Given Honeycomb sets interface IPv4 address | ${node}
+| | ... | local0 | ${ipv4_address} | ${ipv4_prefix}
+| | When Honeycomb adds unnumbered configuration to interface
+| | ... | ${node} | ${interface} | local0
+| | Then IPv4 address from Honeycomb should be
+| | ... | ${node} | local0 | ${ipv4_address} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${node} | local0 | ${ipv4_address}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+| | And IPv4 address from Honeycomb should be
+| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${node} | ${interface} | ${ipv4_address}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+
+| TC12: Honeycomb removes interface unnumbered configuration
+| | [Documentation] | Check if Honeycomb can remove unnumbered configuration\
+| | ... | from an interface.
+| | ...
+| | Given IPv4 address from Honeycomb should be
+| | ... | ${node} | local0 | ${ipv4_address} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${node} | local0 | ${ipv4_address}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+| | And IPv4 address from Honeycomb should be
+| | ... | ${node} | ${interface} | ${ipv4_address} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${node} | ${interface} | ${ipv4_address}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+| | When Honeycomb removes unnumbered configuration from interface
+| | ... | ${node} | ${interface}
+| | Then IPv4 address from Honeycomb should be
+| | ... | ${node} | local0 | ${ipv4_address} | ${ipv4_prefix}
+| | And IPv4 address from VAT should be
+| | ... | ${node} | local0 | ${ipv4_address}
+| | ... | ${ipv4_prefix} | ${ipv4_mask}
+| | And IPv4 address from Honeycomb should be empty | ${node} | ${interface}
+| | And ipv4 address from VAT should be empty | ${node} | ${interface}
+
+| TC13: Honeycomb fails to configure two IPv4 addresses from the same subnet
+| | [Documentation] | Check if Honeycomb can configure two IPv4 addresses in\
+| | ... | the same subnet onto a single interface. It should not be possible.
+| | ...
+| | [Teardown] | Honeycomb removes interface IPv4 addresses | ${node}
+| | ... | ${interface}
+| | ...
+| | [Tags] | EXPECTED_FAILING
+| | ...
+# VPP API does not configure the second address, but returns success. VPP-649
+| | When Honeycomb sets interface IPv4 address with prefix
+| | ... | ${node} | ${interface} | 192.168.0.1 | ${9}
+| | Then Honeycomb fails to add interface IPv4 address
+| | ... | ${node} | ${interface} | 192.168.0.2 | ${9}
+| | And Honeycomb fails to add interface IPv4 address
+| | ... | ${node} | ${interface} | 192.232.0.2 | ${9}
+
+| TC14: Honeycomb fails to configure two IPv6 addresses from the same subnet
+| | [Documentation] | Check if Honeycomb can configure two IPv6 addresses in\
+| | ... | the same subnet onto a single interface. It should not be possible.
+| | ...
+| | [Tags] | EXPECTED_FAILING
+| | ...
+# VPP API does not configure the second address, but returns success. VPP-649
+| | [Teardown] | Honeycomb removes interface IPv6 addresses | ${node}
+| | ... | ${interface}
+| | When Honeycomb sets interface IPv6 address
+| | ... | ${node} | ${interface} | 10::FF10 | ${64}
+| | Then Honeycomb fails to add interface IPv6 address
+| | ... | ${node} | ${interface} | 10::FF11 | ${64}
+| | And Honeycomb fails to add interface IPv6 address
+| | ... | ${node} | ${interface} | 10::FFFF | ${64}