CSIT-611: HC Test: Lisp suite updates + LispGPE

 - added LispGPE test suite
 - added IPv6 tests to Lisp suite
 - added traffic tests to Lisp suite

Change-Id: I3b699149cd73ebf5856072d3f26e98a370dbfc4b
Signed-off-by: selias <samelias@cisco.com>

1 files changed, 115 insertions, 46 deletions

diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
index ac5af9ab83..fa2506cba4 100644
--- a/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-lisp-apihc-apivat-func.robot
@@ -22,11 +22,15 @@
 | ... | unknown-unicast-flood=${True} | arp-termination=${True}
 
 *** Settings ***
+| Library | resources.libraries.python.Trace.Trace
 | Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
 | Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
 | Resource | resources/libraries/robot/honeycomb/lisp.robot
 | Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Variables | resources/test_data/honeycomb/lisp.py
+| Variables | resources/test_data/honeycomb/lisp/lisp.py
 | ...
 | Documentation | *Honeycomb Lisp test suite.*
 | ...
@@ -38,9 +42,9 @@
 
 *** Test Cases ***
 | TC01: Honeycomb enables LISP feature
-| | [Documentation] | Check if Honeycomb can enable the Lisp feature.
+| | [Documentation] | Check if Honeycomb can enable the LISP feature.
 | | ...
-| | Given Lisp Should Not Be Configured | ${node}
+| | Given LISP Should Not Be Configured | ${node}
 | | When Honeycomb enables LISP | ${node}
 | | Then LISP state from Honeycomb should be | ${node} | ${state}
 | | And LISP state from VAT should be | ${node} | ${state}
@@ -53,8 +57,8 @@
 | | Then Locator Set From Honeycomb Should Be
 | | ... | ${node} | ${interface} | ${locator_set}
 
-| TC03: Honeycomb configures Lisp - remote mapping - Bridge Domain
-| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
+| TC03: Honeycomb configures LISP - remote mapping - Bridge Domain
+| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\
 | | ... | with a bridge domain.
 | | ...
 | | Given LISP state from Honeycomb should be | ${node} | ${state}
@@ -66,24 +70,24 @@
 | | And LISP mapping from VAT should be
 | | ... | ${node} | ${vat_remote_bd}
 
-| TC04: Honeycomb can remove Lisp mapping
-| | [Documentation] | Check if Honeycomb can remove a configured Lisp mapping.
+| TC04: Honeycomb can remove LISP mapping
+| | [Documentation] | Check if Honeycomb can remove a configured LISP mapping.
 | | ...
 | | Given LISP mapping from Honeycomb should be
 | | ... | ${node} | ${remote_bd_subtable}
 | | And LISP mapping from VAT should be
 | | ... | ${node} | ${vat_remote_bd}
-| | When Honeycomb removes all lisp mappings | ${node}
+| | When Honeycomb removes all LISP mappings | ${node}
 | | Then LISP mappings from Honeycomb should not exist
 | | ... | ${node}
 | | And LISP mappings from VAT should not exist
 | | ... | ${node}
 
-| TC05: Honeycomb configures Lisp - remote mapping - VRF
-| | [Documentation] | Check if Honeycomb can configure a remote Lisp mapping\
+| TC05: Honeycomb configures LISP - remote mapping - VRF
+| | [Documentation] | Check if Honeycomb can configure a remote LISP mapping\
 | | ... | with VRF.
 | | ...
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
 | | ...
 | | Given LISP mappings from Honeycomb should not exist
 | | ... | ${node}
@@ -94,11 +98,11 @@
 | | ... | ${node} | ${remote_vrf_subtable}
 | | And LISP mapping from VAT should be | ${node} | ${vat_remote_vrf}
 
-| TC06: Honeycomb configures Lisp - local mapping - Bridge Domain
-| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
+| TC06: Honeycomb configures LISP - local mapping - Bridge Domain
+| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\
 | | ... | with a bridge domain.
 | | ...
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
 | | ...
 | | Given Locator Set From Honeycomb Should Be
 | | ... | ${node} | ${interface} | ${locator_set}
@@ -112,11 +116,11 @@
 | | Then LISP mapping from Honeycomb should be | ${node} | ${local_bd_subtable}
 | | And LISP mapping from VAT should be | ${node} | ${vat_local_bd}
 
-| TC07: Honeycomb configures Lisp - local mapping - VRF
-| | [Documentation] | Check if Honeycomb can configure a local Lisp mapping\
+| TC07: Honeycomb configures LISP - local mapping - VRF
+| | [Documentation] | Check if Honeycomb can configure a local LISP mapping\
 | | ... | with VRF.
 | | ...
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
 | | ...
 | | Given Locator Set From Honeycomb Should Be
 | | ... | ${node} | ${interface} | ${locator_set}
@@ -128,16 +132,14 @@
 | | Then LISP mapping from Honeycomb should be | ${node} | ${local_vrf_subtable}
 | | And LISP mapping from VAT should be | ${node} | ${vat_local_vrf}
 
-| TC08: Honeycomb configures Lisp mapping with adjacency
-| | [Documentation] | Check if Honeycomb can configure local and remote Lisp\
+| TC08: Honeycomb configures LISP mapping with adjacency
+| | [Documentation] | Check if Honeycomb can configure local and remote LISP\
 | | ... | mappings with VRF, and configure adjacency.
 | | ...
-| | [Teardown] | Honeycomb removes all lisp mappings | ${node}
+| | [Teardown] | Honeycomb removes all LISP mappings | ${node}
 | | ...
 | | Given Locator Set From Honeycomb Should Be
 | | ... | ${node} | ${interface} | ${locator_set}
-| | And Honeycomb creates first l2 bridge domain
-| | ... | ${node} | ${bd2_name} | ${bd_settings}
 | | And LISP mappings from Honeycomb should not exist
 | | ... | ${node}
 | | And LISP mappings from VAT should not exist
@@ -145,29 +147,29 @@
 | | And Honeycomb adds LISP mapping | ${node} | ${lisp_settings_both_vrf}
 | | When Honeycomb adds LISP adjacency | ${node} | ${7} | remote_map_vrf
 | | ... | adj01 | ${vrf_adjacency}
-| | Then Lisp mapping from Honeycomb should be
+| | Then LISP mapping from Honeycomb should be
 | | ... | ${node} | ${adj_subtable}
 
-| TC09: Honeycomb configures Lisp Map Resolver
-| | [Documentation] | Check if Honeycomb can configure a Lisp Map Resolver.
+| TC09: Honeycomb configures LISP Map Resolver
+| | [Documentation] | Check if Honeycomb can configure a LISP Map Resolver.
 | | ...
 | | Given LISP state from Honeycomb should be | ${node} | ${state}
 | | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds Lisp Map Resolver | ${node} | ${ip_address}
+| | When Honeycomb adds LISP Map Resolver | ${node} | ${ip_address}
 | | Then Map Resolver from Honeycomb should be | ${node} | ${ip_address}
 | | And Map Resolver from VAT should be | ${node} | ${ip_address}
 
-| TC10: Honeycomb configures Lisp Map Server
-| | [Documentation] | Check if Honeycomb can configure a Lisp Map Server.
+| TC10: Honeycomb configures LISP Map Server
+| | [Documentation] | Check if Honeycomb can configure a LISP Map Server.
 | | ...
 | | Given LISP state from Honeycomb should be | ${node} | ${state}
 | | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds Lisp Map Server | ${node} | @{ip_addresses}
+| | When Honeycomb adds LISP Map Server | ${node} | @{ip_addresses}
 | | Then Map Server from Honeycomb should be | ${node} | @{ip_addresses}
 | | And Map Server from VAT should be | ${node} | @{ip_addresses}
 
-| TC11: Honeycomb configures Lisp PETR configuration
-| | [Documentation] | Check if Honeycomb can configure Lisp
+| TC11: Honeycomb configures LISP PETR configuration
+| | [Documentation] | Check if Honeycomb can configure LISP
 | | ... | PETR configuration.
 | | ...
 | | Given LISP state from Honeycomb should be | ${node} | ${state}
@@ -176,8 +178,8 @@
 | | Then PETR configuration from Honeycomb should be | ${node} | ${ip_address}
 | | And PETR configuration from VAT should be | ${node} | enabled
 
-| TC12: Honeycomb configures Lisp RLOC Probing
-| | [Documentation] | Check if Honeycomb can configure Lisp RLOC Probing.
+| TC12: Honeycomb configures LISP RLOC Probing
+| | [Documentation] | Check if Honeycomb can configure LISP RLOC Probing.
 | | ...
 | | Given LISP state from Honeycomb should be | ${node} | ${state}
 | | And LISP state from VAT should be | ${node} | ${state}
@@ -185,17 +187,17 @@
 | | Then RLOC Probing from Honeycomb should be | ${node} | ${True}
 | | And RLOC Probing from VAT should be | ${node} | enabled
 
-| TC13: Honeycomb configures Lisp Map Register
-| | [Documentation] | Check if Honeycomb can configure a Lisp Map Register.
+| TC13: Honeycomb configures LISP Map Register
+| | [Documentation] | Check if Honeycomb can configure a LISP Map Register.
 | | ...
 | | Given LISP state from Honeycomb should be | ${node} | ${state}
 | | And LISP state from VAT should be | ${node} | ${state}
-| | When Honeycomb adds Lisp Map Register | ${node} | ${True}
+| | When Honeycomb adds LISP Map Register | ${node} | ${True}
 | | Then Map Register from Honeycomb should be | ${node} | ${True}
 | | And Map Register from VAT should be | ${node} | enabled
 
-| TC14: Honeycomb enabled Lisp PITR feature
-| | [Documentation] | Check if Honeycomb can configure the Lisp PITR feature.
+| TC14: Honeycomb enabled LISP PITR feature
+| | [Documentation] | Check if Honeycomb can configure the LISP PITR feature.
 | | ...
 | | Given Locator Set From Honeycomb Should Be
 | | ... | ${node} | ${interface} | ${locator_set}
@@ -203,22 +205,89 @@
 | | Then PITR config from Honeycomb should be | ${node} | ${locator_set}
 | | And PITR config from VAT should be | ${node} | ${locator_set}
 
-| TC15: Honeycomb can remove configuration of Lisp features
-| | [Documentation] | Check if Honeycomb can disable all Lisp features.
+| TC15: Honeycomb can remove configuration of LISP features
+| | [Documentation] | Check if Honeycomb can disable all LISP features.
 | | ...
-| | Given Map resolver from Honeycomb should be | ${node} | ${ip_address}
+| | Given Map Resolver from Honeycomb should be | ${node} | ${ip_address}
 | | And PITR config from Honeycomb should be | ${node} | ${locator_set}
+| | And Map Register from Honeycomb should be | ${node} | ${True}
 | | When Honeycomb disables all LISP features | ${node}
-| | Then Lisp Should Not Be Configured | ${node}
+| | Then LISP Should Not Be Configured | ${node}
+
+| TC16: Honeycomb can configure LISP for traffic test - IPv4
+| | [Documentation]
+| | ... | [Top] TG-DUT1-TG.
+| | ... | [Enc] Eth-IPv4-LISP.
+| | ... | [Cfg] On DUT1 configure IPv4 LISP static adjacencies with TG.
+| | ... | [Ver] Make TG send ICMPv4 Echo Req between its interfaces through\
+| | ... | DUT1 and verify LISP encapsulation of received packet.
+| | ... | [Ref] RFC6830.
+| | ...
+| | [Teardown] | LISP Functional Traffic Test Teardown
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4}
+| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${src_ip4} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac}
+| | When Honeycomb enables LISP | ${node}
+| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set}
+| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip4}
+| | Then send packet and verify LISP encap
+| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${src_rloc4} | ${dst_rloc4}
+
+| TC17: Honeycomb can configure LISP for traffic test - IPv6
+| | [Documentation]
+| | ... | [Top] TG-DUT1-TG.
+| | ... | [Enc] Eth-IPv6-LISP.
+| | ... | [Cfg] On DUT1 configure IPv6 LISP static adjacencies with TG.
+| | ... | [Ver] Make TG send ICMPv6 Echo Req between its interfaces through\
+| | ... | DUT1 and verify LISP encapsulation of received packet.
+| | ... | [Ref] RFC6830.
+| | ...
+| | [Teardown] | LISP Functional Traffic Test Teardown
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if1} | up
+| | And Honeycomb configures interface state
+| | ... | ${dut_node} | ${dut_to_tg_if2} | up
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6}
+| | And Honeycomb sets interface IPv6 address | ${dut_node}
+| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${src_ip6} | ${tg_to_dut_if1_mac}
+| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
+| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac}
+| | When Honeycomb enables LISP | ${node}
+| | And Honeycomb adds locator set | ${node} | ${dut_to_tg_if2} | ${locator_set}
+| | And Honeycomb adds LISP mapping | ${node} | ${lisp_traffic_ip6}
+| | Then send packet and verify LISP encap
+| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6}
+| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
+| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
+| | ... | ${src_rloc6} | ${dst_rloc6}
 
-| TC16: Honeycomb configures Lisp Map Request Mode
-| | [Documentation] | Check if Honeycomb can configure Lisp Map Request mode.
+| TC18: Honeycomb configures LISP Map Request Mode
+| | [Documentation] | Check if Honeycomb can configure LISP Map Request mode.
 | | ... | Note: Map Request Mode cannot be removed once configured.
 | | ...
 | | [Teardown] | Honeycomb disables LISP | ${node}
 | | ...
-| | Given Honeycomb enables LISP | ${node}
-| | When Honeycomb sets Lisp Map Request Mode | ${node} | ${True}
+| | Given Honeycomb Enables LISP | ${node}
+| | When Honeycomb sets LISP Map Request Mode | ${node} | ${True}
 | | Then Map Request Mode from Honeycomb should be
 | | ... | ${node} | source-destination
 | | And Map Request Mode from VAT should be | ${node} | src-dst