HC Tests: move honeycomb tests out of vpp directory

https://gerrit.fd.io/r/#/c/9257/ moved VPP instalation
to vpp/func/__init__.robot,
which is run before Honeycomb suite.

Instalation process starts with removing all vpp packages,
which fails because of honeycomb dependency installed by bootstrap script.

This patch fixes HC func jobs by moving them to separate dir.
The honeycomb/func/__init__.robot was updated
to include previous content of vpp/func/__init__.robot.

HC perf jobs were also moved,
but they may require additional care (CSIT-1006).

Change-Id: I99d94272c80a4c57c85ec5cf99cddfbeab7de663
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

1 files changed, 0 insertions, 226 deletions

diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-lispgpe-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-lispgpe-apihc-apivat-func.robot
deleted file mode 100644
index a4d66b5581..0000000000
--- a/tests/vpp/func/honeycomb/mgmt-cfg-lispgpe-apihc-apivat-func.robot
+++ /dev/null
@@ -1,226 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables***
-| ${interface}= | ${node['interfaces']['port1']['name']}
-
-*** Settings ***
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/lisp_gpe.robot
-| Variables | resources/test_data/honeycomb/lisp/lisp_gpe.py
-| ...
-| Documentation | *Honeycomb LISP GPE test suite.*
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Force Tags | HC_FUNC
-
-*** Test Cases ***
-| TC01: Honeycomb enables LISP GPE feature
-| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature.
-| | ...
-| | Given LISP GPE Should Not Be Configured | ${node}
-| | When Honeycomb enables LISP GPE | ${node}
-| | Then LISP GPE state from Honeycomb should be | ${node} | enabled
-| | And LISP GPE state from VAT should be | ${node} | enabled
-
-| TC02: Honeycomb disable LISP GPE feature
-| | [Documentation] | Check if Honeycomb can enable the LISP GPE feature.
-| | ...
-| | [Teardown] | Honeycomb enables LISP GPE | ${node}
-| | Given LISP GPE state from Honeycomb should be | ${node} | enabled
-| | And LISP GPE state from VAT should be | ${node} | enabled
-| | When Honeycomb disables LISP GPE | ${node}
-| | Then LISP GPE state from Honeycomb should be | ${node} | disabled
-| | And LISP GPE state from VAT should be | ${node} | disabled
-
-| TC03: Honeycomb configures LISP GPE mapping - negative, IPv4
-| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
-| | ... | with VRF.
-| | ...
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4}
-
-| TC04: Honeycomb can remove LISP GPE mapping
-| | [Documentation] | Check if Honeycomb can remove a configured LISP GPE\
-| | ... | mapping.
-| | ...
-| | Given LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4}
-| | When Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4['id']}
-| | Then LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-
-| TC05: Honeycomb configures LISP GPE mapping - positive, IPv4
-| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
-| | ... | with VRF.
-| | ...
-| | [Teardown] | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${positive_mapping_ip4['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${positive_mapping_ip4}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${positive_mapping_ip4}
-
-| TC06: Honeycomb configures LISP GPE mapping - negative, IPv6
-| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
-| | ... | with VRF.
-| | ...
-| | [Teardown] | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip6['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip6}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip6}
-
-| TC07: Honeycomb configures LISP GPE mapping - positive, IPv6
-| | [Documentation] | Check if Honeycomb can configure a LISP mapping\
-| | ... | with VRF.
-| | ...
-| | [Teardown] | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${positive_mapping_ip6['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${positive_mapping_ip6}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${positive_mapping_ip6}
-
-| TC08: Honeycomb can modify existing LISP GPE mappping
-| | [Documentation] | Check if Honeycomb can modify and existing LISP GPE\
-| | ... | mapping.
-| | ...
-| | [Teardown] | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4_edit['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4}
-| | When Honeycomb adds first LISP GPE mapping | ${node}
-| | ... | ${negative_mapping_ip4_edit}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4_edit}
-
-| TC09: Honeycomb can configure multiple LISP GPE mapppings
-| | [Documentation] | Check if Honeycomb can configure multiple LISP GPE\
-| | ... | mappings at the same time.
-| | ...
-| | [Teardown] | Run Keywords
-| | ... | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4['id']}
-| | ... | AND | Honeycomb removes LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4_2['id']}
-| | Given LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | When Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4}
-| | And Honeycomb adds LISP GPE mapping | ${node} | ${negative_mapping_ip4_2}
-| | Then LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4}
-| | And LISP GPE mapping from Honeycomb should be
-| | ... | ${node} | ${negative_mapping_ip4_2}
-
-| TC10: Honeycomb can disable all LISP GPE features
-| | [Documentation] | Check if Honeycomb can disable all LISP GPE features.
-| | ...
-| | Given Honeycomb adds first LISP GPE mapping
-| | ... | ${node} | ${negative_mapping_ip4}
-| | When Honeycomb disables all LISP GPE features | ${node}
-| | Then LISP GPE mappings from Honeycomb should not exist
-| | ... | ${node}
-| | And LISP GPE state from Honeycomb should be | ${node} | disabled
-| | And LISP GPE state from VAT should be | ${node} | disabled
-
-| TC11: Honeycomb can configure LISP GPE for traffic test - IPv4
-| | [Documentation]
-| | ... | [Top] TG-DUT1-TG.
-| | ... | [Enc] Eth-IPv4-LISPGPE-IPv4-ICMPv4
-| | ... | [Cfg] Configure IPv4 LISP static adjacencies on DUT1.
-| | ... | [Ver] Case: ip4-lispgpe-ip4 - phy2lisp
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces through DUT1\
-| | ... | LISP GPE tunnel verify LISP encapsulation of received packet.
-| | ... | [Ref] RFC6830.
-| | ...
-| | [Teardown] | LISPGPE functional traffic test teardown
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip4} | ${prefix_len4}
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip4} | ${prefix_len4}
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${src_ip4} | ${tg_to_dut_if1_mac}
-| | And Honeycomb adds interface IPv4 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${tg_to_dut_if2_ip4} | ${tg_to_dut_if2_mac}
-| | When Honeycomb enables LISP GPE | ${node}
-| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip4}
-| | Then send packet and verify LISP GPE encap
-| | ... | ${tg_node} | ${src_ip4} | ${dst_ip4}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${src_rloc4} | ${dst_rloc4}
-
-| TC12: Honeycomb can configure LISP GPE for traffic test - IPv6
-| | [Documentation]
-| | ... | [Top] TG-DUT1-TG.
-| | ... | [Enc] Eth-IPv6-LISPGPE-IPv6-ICMPv6
-| | ... | [Cfg] Configure IPv6 LISP static adjacencies on DUT1.
-| | ... | [Ver] Case: ip6-lispgpe-ip6 - phy2lisp
-| | ... | Make TG send ICMPv6 Echo Req between its interfaces through DUT1\
-| | ... | LISP GPE tunnel verify LISP encapsulation of received packet.
-| | ... | [Ref] RFC6830.
-| | ...
-| | [Teardown] | LISPGPE functional traffic test teardown
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip6} | ${prefix_len6}
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip6} | ${prefix_len6}
-| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${src_ip6} | ${tg_to_dut_if1_mac}
-| | And Honeycomb adds interface IPv6 neighbor | ${dut_node} | ${dut_to_tg_if2}
-| | ... | ${tg_to_dut_if2_ip6} | ${tg_to_dut_if2_mac}
-| | When Honeycomb enables LISP GPE | ${node}
-| | And Honeycomb adds LISP GPE mapping | ${node} | ${lisp_traffic_ip6}
-| | Then send packet and verify LISP GPE encap
-| | ... | ${tg_node} | ${src_ip6} | ${dst_ip6}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if2_mac} | ${tg_to_dut_if2_mac}
-| | ... | ${src_rloc6} | ${dst_rloc6}