aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot
diff options
context:
space:
mode:
authorTibor Frank <tifrank@cisco.com>2017-06-20 13:57:08 +0200
committerTibor Frank <tifrank@cisco.com>2017-06-29 12:17:28 +0000
commit6721e7f09aa95bff6622068332a3f56afad9c87b (patch)
tree37ef7f40e53f740a62830ab46142aa87342dc56b /tests/vpp/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot
parent859157b5db45927c7b4bb0b2d575e68805777a86 (diff)
CSIT-687: Directory structure reorganization
Change-Id: I772c9e214be2461adf58124998d272e7d795220f Signed-off-by: Tibor Frank <tifrank@cisco.com> Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
Diffstat (limited to 'tests/vpp/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot')
-rw-r--r--tests/vpp/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot147
1 files changed, 147 insertions, 0 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot
new file mode 100644
index 0000000000..b5048944f5
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-nsh-apihc-apivat-func.robot
@@ -0,0 +1,147 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables***
+| ${super_if}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/nsh.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot
+| Variables | resources/test_data/honeycomb/nsh.py
+| Variables | resources/test_data/honeycomb/vxlan_gpe.py
+| ...
+| Documentation | *Honeycomb NSH test suite.*
+| ...
+| Suite Setup | Run Keywords
+| ... | Enable Honeycomb Feature | ${node} | NSH | AND
+| ... | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Run Keywords
+| ... | Tear Down Honeycomb Functional Test Suite | ${node} | AND
+| ... | Disable Honeycomb Feature | ${node} | NSH
+| ...
+| Force Tags | honeycomb_sanity | honeycomb_odl
+
+*** Test Cases ***
+| TC01: Honeycomb can configure NSH entry
+| | [Documentation] | Check if Honeycomb can configure an NSH entry.
+| | ...
+| | Given NSH Operational Data From Honeycomb Should Be empty | ${node}
+| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1}
+| | Then NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+
+| TC02: Honeycomb can remove NSH entry
+| | [Documentation] | Check if Honeycomb can remove an existing NSH entry.
+| | ...
+| | Given NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | When Honeycomb removes NSH entry | ${node} | entry1
+| | Then NSH Operational Data From Honeycomb Should Be empty | ${node}
+
+| TC03: Honeycomb can configure new NSH entry
+| | [Documentation] | Check if Honeycomb can configure an NSH antry after one\
+| | ... | has been deleted.
+| | ...
+| | [Teardown] | Honeycomb removes NSH entry | ${node} | entry2
+| | ...
+| | Given NSH Operational Data From Honeycomb Should Be empty | ${node}
+| | When Honeycomb adds NSH entry | ${node} | entry2 | ${nsh_entry2}
+| | Then NSH entry from Honeycomb should be
+| | ... | ${node} | entry2 | ${nsh_entry2_oper}
+
+| TC04: Honeycomb can configure multiple NSH entries at the same time
+| | [Documentation] | Check if Honeycomb can configure an NSH entry when one\
+| | ... | already exists.
+| | ...
+| | [Teardown] | Honeycomb clears NSH configuration | ${node}
+| | ...
+| | Given NSH Operational Data From Honeycomb Should Be empty | ${node}
+| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1}
+| | And Honeycomb adds NSH entry | ${node} | entry2 | ${nsh_entry2}
+| | Then NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry2 | ${nsh_entry2_oper}
+
+| TC05: Honeycomb can configure NSH map
+| | [Documentation] | Check if Honeycomb can configure an NSH map.
+| | ...
+| | Given NSH Operational Data From Honeycomb Should Be empty | ${node}
+| | And Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1}
+| | When Honeycomb adds NSH entry | ${node} | entry1 | ${nsh_entry1}
+| | And Honeycomb adds NSH map | ${node} | map1 | ${nsh_map1}
+| | Then NSH map from Honeycomb should be | ${node} | map1 | ${nsh_map1_oper}
+
+| TC06: Honeycomb can remove NSH map
+| | [Documentation] | Check if Honeycomb can remove an existing NSH map.
+| | ...
+| | Given NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | And VxLAN GPE Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1}
+| | And NSH map from Honeycomb should be | ${node} | map1 | ${nsh_map1_oper}
+| | When Honeycomb removes NSH map | ${node} | map1
+| | Then NSH map from Honeycomb should not exist | ${node} | map1
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+
+| TC07: Honeycomb can modify existing NSH map
+| | [Documentation] | Check if Honeycomb can configure an NSH map after one\
+| | ... | has been deleted.
+| | ...
+| | [Teardown] | Honeycomb removes NSH map | ${node} | map1_edit
+| | ...
+| | Given NSH map from Honeycomb should not exist | ${node} | map1_edit
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | And VxLAN GPE Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1}
+| | When Honeycomb adds NSH map | ${node} | map1_edit | ${nsh_map1_edit}
+| | Then NSH map from Honeycomb should be
+| | ... | ${node} | map1_edit | ${nsh_map1_edit_oper}
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+
+| TC08: Honeycomb can configure multiple NSH maps at the same time
+| | [Documentation] | Check if Honeycomb can configure and NSH map when one\
+| | ... | already exists.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb clears NSH configuration | ${node} | AND
+| | ... | Honeycomb removes VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if1} | AND
+| | ... | Honeycomb removes VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | ...
+| | Given NSH map from Honeycomb should not exist | ${node} | map2
+| | And NSH entry from Honeycomb should be
+| | ... | ${node} | entry1 | ${nsh_entry1_oper}
+| | And VxLAN GPE Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings1} | ${vxlan_gpe_settings1}
+| | And Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | ... | ${vxlan_gpe_base_settings2} | ${vxlan_gpe_settings2}
+| | When Honeycomb adds NSH map | ${node} | map1 | ${nsh_map1}
+| | And Honeycomb adds NSH map | ${node} | map2 | ${nsh_map2}
+| | Then NSH map from Honeycomb should be
+| | ... | ${node} | map1 | ${nsh_map1_oper}
+| | And NSH map from Honeycomb should be
+| | ... | ${node} | map2 | ${nsh_map2_oper}