HC Tests: move honeycomb tests out of vpp directory

https://gerrit.fd.io/r/#/c/9257/ moved VPP instalation
to vpp/func/__init__.robot,
which is run before Honeycomb suite.

Instalation process starts with removing all vpp packages,
which fails because of honeycomb dependency installed by bootstrap script.

This patch fixes HC func jobs by moving them to separate dir.
The honeycomb/func/__init__.robot was updated
to include previous content of vpp/func/__init__.robot.

HC perf jobs were also moved,
but they may require additional care (CSIT-1006).

Change-Id: I99d94272c80a4c57c85ec5cf99cddfbeab7de663
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

1 files changed, 0 insertions, 765 deletions

diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot
deleted file mode 100644
index 302b22fa4e..0000000000
--- a/tests/vpp/func/honeycomb/mgmt-cfg-pluginacl-apihc-apivat-func.robot
+++ /dev/null
@@ -1,765 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables ***
-| &{if_settings}= | enabled=True
-# Bridge domain settings
-| ${bd_name}= | bd1
-| &{bd_settings}= | flood=${True} | forward=${True} | learn=${True}
-| ... | unknown-unicast-flood=${True} | arp-termination=${False}
-| &{bd_if_settings}= | split_horizon_group=${0} | bvi=${False}
-# Names for AC lists
-| ${acl_name_macip}= | macip
-| ${acl_name_l3_ip4}= | acl_l3_ip4
-| ${acl_name_l3_ip6}= | acl_l3_ip6
-| ${acl_name_l4}= | acl_l4
-| ${acl_name_mixed}= | acl_mixed
-| ${acl_name_icmp}= | acl_icmp
-| ${acl_name_icmpv6}= | acl_icmpv6
-| ${acl_name_reflex}= | acl_reflex
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
-| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| Library | resources.libraries.python.honeycomb.HcAPIKwACL.ACLKeywords
-| Library | resources.libraries.python.Trace
-| Library | resources.libraries.python.IPv4Setup
-| Library | resources.libraries.python.IPv4Util
-| Library | resources.libraries.python.IPv6Util
-| Library | resources.libraries.python.Routing
-| ...
-| Test Setup | Clear Packet Trace on All DUTs | ${nodes}
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Documentation | *Honeycomb access control lists test suite for ACL plugin.*
-| ...
-| Force Tags | HC_FUNC
-
-*** Test Cases ***
-| TC01: ACL MAC filtering through plugin-acl node - bridged
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
-| | ... | and configure L2 MAC ACL on ingress interface.
-| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\
-| | ... | using different MACs. Receive all packets except those with\
-| | ... | MACs in the filtered ranges.
-| | ...
-| | [Teardown] | Bridged ACL test teardown
-| | ...
-| | Given Setup Interfaces And Bridge Domain For plugin-acl Test
-| | ... | macip | ${acl_name_macip}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_macip} | ${acl_settings} | macip=${True}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_macip}
-| | ... | ingress | macip=${True}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${classify_src}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${classify_src2}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-
-| TC02: ACL IPv4 filtering through plugin-acl node - bridged
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
-| | ... | and configure L3 IPv4 ACL on ingress interface with src/dst IP
-| | ... | and protocol number.
-| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
-| | ... | to the other, using different IPv4 IPs. Receive all packets except\
-| | ... | those with IPs in the filtered ranges and UDP protocol payload.
-| | ...
-| | [Teardown] | Bridged ACL test teardown
-| | ...
-| | Given Setup Interfaces And Bridge Domain For plugin-acl Test
-| | ... | l3_ip4 | ${acl_name_l3_ip4}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-
-| TC03: ACL IPv6 filtering through plugin-acl node - bridged
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv6-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
-| | ... | and configure L3 IPv6 ACL on ingress interface with src/dst IP
-| | ... | and protocol number.
-| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
-| | ... | to the other, using different IPv6 IPs. Receive all packets except\
-| | ... | those with IPs in the filtered ranges and UDP protocol payload.
-| | ...
-| | [Teardown] | Bridged ACL test teardown
-| | ...
-| | Given Setup interfaces and bridge domain for plugin-acl test
-| | ... | l3_ip6 | ${acl_name_l3_ip6}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-
-| TC04: ACL port filtering through plugin-acl node - bridged
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
-| | ... | and and configure L4 port ACL on ingress interface
-| | ... | with src/dst port ranges.
-| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
-| | ... | to the other, using different ports. Receive all packets except\
-| | ... | those with ports in the filtered ranges.
-| | ...
-| | [Teardown] | Bridged ACL test teardown
-| | ...
-| | Given Setup interfaces and bridge domain for plugin-acl test
-| | ... | L4 | ${acl_name_l4}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${classify_src} | ${classify_dst}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${classify_src+5} | ${classify_dst+5}
-
-| TC05: ACL filtering with IPv4 address and TCP port in one rule - bridged
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
-| | ... | and configure a mixed rule with src/dst IP, TCP protocol
-| | ... | and port ranges.
-| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\
-| | ... | using IPs and ports. Receive all packets except those with\
-| | ... | both IPs and ports in the filtered ranges.
-| | ...
-| | [Teardown] | Bridged ACL test teardown
-| | ...
-| | Given Setup Interfaces And Bridge Domain For plugin-acl Test
-| | ... | mixed | ${acl_name_mixed}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src_ip} | ${classify_dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src_ip} | ${classify_dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${classify_src_port} | ${classify_dst_port}
-
-| TC06: ACL ICMP packet filtering - bridged
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-ICMP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
-| | ... | and configure a ICMP protocol filtering by ICMP type and code.
-| | ... | [Ver] Send ICMP packets from one TG interface\
-| | ... | to the other, using different codes and types. Receive all packets\
-| | ... | except those with types and codes in the filtered ranges.
-| | ...
-| | [Teardown] | Bridged ACL test teardown
-| | ...
-| | Given Setup interfaces and bridge domain for plugin-acl test
-| | ... | icmp | ${acl_name_icmp}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress
-| | Then Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${icmp_type} | ${icmp_code}
-| | Then Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${classify_type} | ${icmp_code}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${classify_type} | ${classify_code}
-
-| TC07: ACL ICMPv6 packet filtering - bridged
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv6-ICMP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG\
-| | ... | and configure a ICMPv6 protocol filtering by ICMPv6 type and code.
-| | ... | [Ver] Send ICMPv6 packets from one TG interface\
-| | ... | to the other, using different codes and types. Receive all packets\
-| | ... | except those with the filtered type and code.
-| | ...
-| | [Teardown] | Bridged ACL test teardown
-| | ...
-| | Given Setup interfaces and bridge domain for plugin-acl test
-| | ... | icmpv6 | ${acl_name_icmpv6}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress
-| | Then Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${icmp_type} | ${icmp_code}
-| | Then Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${classify_type} | ${icmp_code}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${classify_type} | ${classify_code}
-
-| TC08: ACL reflexive IPv4 filtering through plugin-acl node - bridged
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 bridge both interfaces to TG,\
-| | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress.
-| | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\
-| | ... | it back. Then send the packet with reversed src/dst IP address\
-| | ... | to VPP interface 2 and receive it from interface 1(this should create\
-| | ... | a reflexive "permit" rule) Finally, send the original packet again\
-| | ... | and receive it from interface 2.
-| | ...
-# CSIT-863: running ODL and HC on single node may cause out of memory errors
-| | [Tags] | HC_REST_ONLY
-| | ...
-| | [Teardown] | Bridged ACL test teardown
-| | ...
-| | Given Setup Interfaces And Bridge Domain For plugin-acl Test
-| | ... | reflex | ${acl_name_reflex}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress
-| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py
-| | ... | block_all | block_all
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | block_all | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_dst} | ${classify_src}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac}
-| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac}
-| | ... | TCP | ${dst_port} | ${src_port}
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-
-# Routing section
-# ===============
-
-| TC09: ACL IPv4 filtering through plugin-acl node - routed
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
-| | ... | interfaces to TG, add ARP entry and routes, and configure L3 IPv4 ACL\
-| | ... | on ingress interface with src/dst IP and protocol.
-| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
-| | ... | to the other, using different IPv4 IPs. Receive all packets except\
-| | ... | those with IPs in the filtered ranges and UDP protocol payload.
-| | ...
-# CSIT-863: running ODL and HC on single node may cause out of memory errors
-| | [Tags] | HC_REST_ONLY
-| | ...
-| | [Teardown] | Routed ACL test teardown - ipv4
-| | ...
-| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test
-| | ... | l3_ip4 | ${acl_name_l3_ip4}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_l3_ip4} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip4} | ingress
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-
-| TC10: ACL IPv6 filtering through plugin-acl node - routed
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv6-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\
-| | ... | interfaces to TG, add IP neighbor entry and routes, and configure\
-| | ... | L3 IPv6 ACL on ingress interface with src/dst IP and next-header.
-| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
-| | ... | to the other, using different IPv6 IPs. Receive all packets except\
-| | ... | those with IPs in the filtered ranges and UDP protocol payload.
-| | ...
-# CSIT-863: running ODL and HC on single node may cause out of memory errors
-| | [Tags] | HC_REST_ONLY
-| | ...
-| | [Teardown] | Routed ACL test teardown - ipv6
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py
-| | ... | L3_IP6 | ${acl_name_l3_ip6}
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
-| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2}
-| | And Honeycomb adds interface IPv6 neighbor
-| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac}
-| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length}
-| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
-| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length}
-| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_l3_ip6} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l3_ip6} | ingress
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | UDP | ${src_port} | ${dst_port}
-
-| TC11: ACL port filtering through plugin-acl node - routed
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
-| | ... | interfaces to TG, add ARP entry and routes, and configure L4 port ACL\
-| | ... | on ingress interface with src/dst port ranges.
-| | ... | [Ver] Send simple TCP and UDP packets from one TG interface\
-| | ... | to the other, using different ports. Receive all packets except\
-| | ... | those with ports in the filtered ranges.
-| | ...
-| | [Teardown] | Routed ACL test teardown - ipv4
-| | ...
-# CSIT-863: running ODL and HC on single node may cause out of memory errors
-| | [Tags] | HC_REST_ONLY
-| | ...
-| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test
-| | ... | L4 | ${acl_name_l4}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_l4} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_l4} | ingress
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${classify_src} | ${classify_dst}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${classify_src+5} | ${classify_dst+5}
-
-| TC12: ACL filtering with IPv4 address and TCP port in one rule - routed
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
-| | ... | interfaces to TG, add ARP entry and routes and configure a mixed
-| | ... | rule with src/dst IP, TCP protocol and port ranges.
-| | ... | [Ver] Send simple TCP packets from one TG interface to the other,\
-| | ... | using IPs and ports. Receive all packets except those with\
-| | ... | both IPs and ports in the filtered ranges.
-| | ...
-| | [Teardown] | Routed ACL test teardown - ipv4
-| | ...
-# CSIT-863: running ODL and HC on single node may cause out of memory errors
-| | [Tags] | HC_REST_ONLY
-| | ...
-| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test
-| | ... | mixed | ${acl_name_mixed}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_mixed} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_mixed} | ingress
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | Then Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src_ip} | ${classify_dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src_ip} | ${classify_dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dst_mac}
-| | ... | TCP | ${classify_src_port} | ${classify_dst_port}
-
-| TC13: ACL ICMP packet filtering - routed
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
-| | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\
-| | ... | on ingress interface with ICMP type and code.
-| | ... | [Ver] Send ICMP packets from one TG interface\
-| | ... | to the other, using different codes and types. Receive all packets\
-| | ... | except those with the filtered type and code.
-| | ...
-| | [Teardown] | Routed ACL test teardown - ipv4
-| | ...
-# CSIT-863: running ODL and HC on single node may cause out of memory errors
-| | [Tags] | HC_REST_ONLY
-| | ...
-| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test
-| | ... | icmp | ${acl_name_icmp}
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_icmp} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmp} | ingress
-| | Then Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${icmp_type} | ${icmp_code}
-| | Then Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${classify_type} | ${icmp_code}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${classify_type} | ${classify_code}
-
-| TC14: ACL ICMPv6 packet filtering - routed
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv6 addresses on both\
-| | ... | interfaces to TG, add ARP entry and routes, and configure ICMP ACL\
-| | ... | on ingress interface with ICMPv6 type and code.
-| | ... | [Ver] Send ICMPv6 packets from one TG interface\
-| | ... | to the other, using different codes and types. Receive all packets\
-| | ... | except those with the filtered type and code.
-| | ...
-# CSIT-863: running ODL and HC on single node may cause out of memory errors
-| | [Tags] | HC_REST_ONLY
-| | ...
-| | [Teardown] | Routed ACL test teardown - ipv6
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py
-| | ... | icmpv6 | ${acl_name_icmpv6}
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if1} | up
-| | And Honeycomb configures interface state
-| | ... | ${dut_node} | ${dut_to_tg_if2} | up
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | And Honeycomb sets interface IPv6 address | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
-| | And Honeycomb adds interface IPv6 neighbor
-| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac}
-| | And VPP RA suppress link layer | ${dut_node} | ${dut_to_tg_if2}
-| | And VPP Route Add | ${node} | ${dst_net} | ${prefix_length}
-| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
-| | And VPP Route Add | ${node} | ${classify_dst_net} | ${prefix_length}
-| | ... | ${gateway} | interface=${dut_to_tg_if2} | use_sw_index=False
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_icmpv6} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_icmpv6} | ingress
-| | Then Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${icmp_type} | ${icmp_code}
-| | Then Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${classify_type} | ${icmp_code}
-| | And Run Keyword And Expect Error | ICMP echo Rx timeout
-| | ... | Send ICMP packet with type and code and verify received packet
-| | ... | ${tg_node}
-| | ... | ${src_ip} | ${dst_ip}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | ${classify_type} | ${classify_code}
-
-| TC15: ACL reflexive IPv4 filtering through plugin-acl node - routed
-| | [Documentation]
-| | ... | [Top] TG=DUT1=TG.
-| | ... | [Enc] Eth-IPv4-TCP.
-| | ... | [Cfg] (Using Honeycomb API) On DUT1 set IPv4 addresses on both\
-| | ... | interfaces to TG, add ARP entries and routes,\
-| | ... | configure a "drop all" ACL on ingress and reflexive ACL on egress.
-| | ... | [Ver] Send a simple TCP packet to VPP interface 1 and do not receive\
-| | ... | it back. Then send the packet with reversed src/dst IP address\
-| | ... | to VPP interface 2 and receive it from interface 1(this should create\
-| | ... | a reflexive "permit" rule) Finally, send the original packet again\
-| | ... | and receive it from interface 2.
-| | ...
-# CSIT-863: running ODL and HC on single node may cause out of memory errors
-| | [Tags] | HC_REST_ONLY
-| | ...
-| | [Teardown] | Routed ACL test teardown - ipv4
-| | ...
-| | Given Setup Interface IPs And Routes For IPv4 plugin-acl Test
-| | ... | reflex | ${acl_name_reflex}
-| | And Add ARP on DUT
-| | ... | ${node} | ${dut_to_tg_if1} | ${gateway2} | ${tg_to_dut_if1_mac}
-| | And VPP Route Add
-| | ... | ${node} | ${src_net} | ${prefix_length} | ${gateway2}
-| | ... | interface=${dut_to_tg_if1} | use_sw_index=False
-| | And VPP Route Add
-| | ... | ${node} | ${classify_src_net} | ${prefix_length} | ${gateway2}
-| | ... | interface=${dut_to_tg_if1} | use_sw_index=False
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | ${acl_name_reflex} | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_name_reflex} | egress
-| | And Import Variables | resources/test_data/honeycomb/plugin_acl.py
-| | ... | block_all | block_all
-| | When Honeycomb Creates ACL Chain Through ACL plugin
-| | ... | ${dut_node} | block_all | ${acl_settings}
-| | And Honeycomb Assigns plugin-acl Chain To Interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | block_all | ingress
-| | And Run Keyword And Expect Error | TCP/UDP Rx timeout
-| | ... | Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_dst} | ${classify_src}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if2_mac}
-| | ... | ${tg_to_dut_if1} | ${dut_to_tg_if2_mac}
-| | ... | TCP | ${dst_port} | ${src_port}
-| | And Send TCP or UDP packet and verify received packet | ${tg_node}
-| | ... | ${classify_src} | ${classify_dst}
-| | ... | ${tg_to_dut_if1} | ${tg_to_dut_if1_mac}
-| | ... | ${tg_to_dut_if2} | ${dut_to_tg_if1_mac}
-| | ... | TCP | ${src_port} | ${dst_port}
-
-*** Keywords ***
-| Setup interface IPs and routes for IPv4 plugin-acl test
-| | [Documentation] | Import test variables, set interfaces up,
-| | ... | configure IPv4 addresses, add neighbor entry and routes.
-| | ...
-| | [Arguments] | ${test_data_id} | ${acl_name}
-| | ...
-| | Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Import Variables | resources/test_data/honeycomb/plugin_acl.py
-| | ... | ${test_data_id} | ${acl_name}
-| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
-| | And Honeycomb adds interface IPv4 neighbor
-| | ... | ${node} | ${dut_to_tg_if2} | ${gateway} | ${tg_to_dut_if2_mac}
-| | VPP Route Add
-| | ... | ${node} | ${dst_net} | ${prefix_length} | ${gateway}
-| | ... | interface=${dut_to_tg_if2} | use_sw_index=False
-| | VPP Route Add
-| | ... | ${node} | ${classify_dst_net} | ${prefix_length} | ${gateway}
-| | ... | interface=${dut_to_tg_if2} | use_sw_index=False
-
-| Setup interfaces and bridge domain for plugin-acl test
-| | [Documentation] | Import test variables, set interfaces up and bridge them.
-| | ...
-| | [Arguments] | ${test_data_id} | ${acl_name}
-| | ...
-| | Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | Import Variables | resources/test_data/honeycomb/plugin_acl.py
-| | ... | ${test_data_id} | ${acl_name}
-| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1} | up
-| | Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2} | up
-| | Honeycomb Creates first L2 Bridge Domain
-| | ... | ${dut_node} | ${bd_name} | ${bd_settings}
-| | Honeycomb Adds Interfaces To Bridge Domain
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
-| | ... | ${bd_name} | ${bd_if_settings}
-
-| Bridged ACL test teardown
-| | [Documentation] | Log packet trace and ACL settings,
-| | ... | then clean up bridge domains.
-| | ...
-| | Show Packet Trace on All DUTs | ${nodes}
-| | Read plugin-ACL configuration from VAT | ${node}
-| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1}
-| | Honeycomb Removes All Bridge Domains
-| | ... | ${node} | ${dut_to_tg_if1} | ${dut_to_tg_if2}
-
-| Routed ACL test teardown - ipv4
-| | [Documentation] | Log packet trace and ACL settings,
-| | ... | then clean up IPv4 addresses and neighbors.
-| | ...
-| | Show Packet Trace on All DUTs | ${nodes}
-| | Read plugin-ACL configuration from VAT | ${node}
-| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1}
-| | Honeycomb removes interface IPv4 addresses | ${node} | ${dut_to_tg_if1}
-| | Honeycomb clears all interface IPv4 neighbors | ${node} | ${dut_to_tg_if1}
-
-| Routed ACL test teardown - ipv6
-| | [Documentation] | Log packet trace and ACL settings,
-| | ... | then clean up IPv6 addresses and neighbors.
-| | ...
-| | Show Packet Trace on All DUTs | ${nodes}
-| | Clear plugin-ACL configuration | ${node} | ${dut_to_tg_if1}
-| | Read plugin-ACL configuration from VAT | ${node}
-| | Honeycomb removes interface IPv6 addresses | ${node} | ${dut_to_tg_if1}
-| | Honeycomb clears all interface IPv6 neighbors | ${node} | ${dut_to_tg_if1}