HC Tests: move honeycomb tests out of vpp directory

https://gerrit.fd.io/r/#/c/9257/ moved VPP instalation
to vpp/func/__init__.robot,
which is run before Honeycomb suite.

Instalation process starts with removing all vpp packages,
which fails because of honeycomb dependency installed by bootstrap script.

This patch fixes HC func jobs by moving them to separate dir.
The honeycomb/func/__init__.robot was updated
to include previous content of vpp/func/__init__.robot.

HC perf jobs were also moved,
but they may require additional care (CSIT-1006).

Change-Id: I99d94272c80a4c57c85ec5cf99cddfbeab7de663
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

1 files changed, 0 insertions, 142 deletions

diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-policer-apihc-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-policer-apihc-func.robot
deleted file mode 100644
index 1f4d2a9021..0000000000
--- a/tests/vpp/func/honeycomb/mgmt-cfg-policer-apihc-func.robot
+++ /dev/null
@@ -1,142 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables ***
-| ${interface}= | ${node['interfaces']['port1']['name']}
-| ${tg_to_dut_if1_ip}= | 192.168.122.1
-| ${dut_to_tg_if1_ip}= | 192.168.122.2
-| ${dut_to_tg_if2_ip}= | 192.168.123.1
-| ${tg_to_dut_if2_ip}= | 192.168.123.2
-| ${prefix_length}= | ${24}
-| ${dscp_number}= | ${20}
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/policer.robot
-| Resource | resources/libraries/robot/honeycomb/access_control_lists.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Library | resources.libraries.python.Trace
-| Variables | resources/test_data/honeycomb/policer_variables.py
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Force Tags | HC_FUNC
-| ...
-| Documentation | *Honeycomb Policer management test suite.*
-
-*** Test Cases ***
-| TC01: Honeycomb can configure Policer
-| | [Documentation] | Checks if Honeycomb can configure Policer.
-| | ...
-| | Given Policer Operational Data From Honeycomb Should Be empty | ${node}
-| | When Honeycomb configures Policer | ${node} | ${policer_data}
-| | Then Policer Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${policer_data_oper}
-
-| TC02: Honeycomb can disable Policer
-| | [Documentation] | Checks if Honeycomb can disable Policer.
-| | ...
-| | Given Policer Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${policer_data_oper}
-| | When Honeycomb removes Policer configuration | ${node}
-| | Then Policer Operational Data From Honeycomb Should Be empty | ${node}
-
-| TC03: Honeycomb can configure Policer with increased values of CIR (900kbps)
-| | [Documentation] | Checks if Honeycomb can configure Policer\
-| | ... | with increased values of CIR.
-| | ...
-| | [Teardown] | Tear down policer test | ${node}
-| | ...
-| | Given Policer Operational Data From Honeycomb Should Be empty | ${node}
-| | When Honeycomb configures Policer | ${node} | ${policer_data_2}
-| | Then Policer Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${policer_data_oper_2}
-
-| TC04: Honeycomb can configure Packets-Per-Second Based Policer
-| | [Documentation] | Checks if Honeycomb can configure Policer\
-| | ... | based on rate-type measured in pps.
-| | ...
-| | [Teardown] | Tear down policer test | ${node}
-| | ...
-| | Given Policer Operational Data From Honeycomb Should Be empty | ${node}
-| | When Honeycomb configures Policer | ${node} | ${policer_data_3}
-| | Then Policer Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${policer_data_oper_3}
-
-| TC05: Configure Policer on Interface
-| | [Documentation] | Honeycomb can configure Policer on a given interface.
-| | ...
-| | [Teardown] | Run Keywords
-| | ... | Honeycomb disables Policer on interface | ${node} | ${interface} | AND
-| | ... | Honeycomb removes ACL session | ${node}
-| | ... | ${acl_tables['hc_acl_table']['name']}
-| | ... | ${acl_tables['hc_acl_session']['match']} | AND
-| | ... | Honeycomb removes ACL table | ${node}
-| | ... | ${acl_tables['hc_acl_table']['name']} | AND
-| | ... | Tear down policer test | ${node}
-| | ...
-| | Given Honeycomb configures Policer | ${node} | ${policer_data}
-| | And ACL table from Honeycomb should not exist
-| | ... | ${node} | ${acl_tables['hc_acl_table']['name']}
-| | When Honeycomb creates ACL table
-| | ... | ${node} | ${acl_tables['hc_acl_table']}
-| | And Honeycomb adds ACL session
-| | ... | ${node} | ${acl_tables['hc_acl_table']['name']}
-| | ... | ${acl_tables['hc_acl_session']}
-| | Then Honeycomb enables policer on interface
-| | ... | ${node} | ${interface} | ${acl_tables['hc_acl_table']['name']}
-
-| TC06: VPP policer 2R3C Color-aware marks packet
-| | [Documentation]
-| | ... | [Top] TG=DUT1.
-| | ... | [Ref] RFC2474, RFC2698.
-| | ... | [Cfg] Configure 2R3C color-aware policer on DUT1 on the first\
-| | ... | interface.
-| | ... | [Ver] TG sends IPv4 TCP packet on the first link to DUT1.\
-| | ... | Packet on DUT1 is marked with DSCP tag. Verifies if DUT1 sends\
-| | ... | correct IPv4 TCP packet with correct DSCP on the second link to TG.
-| | ...
-| | [Teardown] | Show Packet Trace on All DUTs | ${nodes}
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb configures Policer | ${dut_node} | ${policer_data_3}
-| | And ACL table from Honeycomb should not exist
-| | ... | ${dut_node} | ${acl_tables['hc_acl_table']['name']}
-| | When Honeycomb creates ACL table
-| | ... | ${dut_node} | ${acl_tables['hc_acl_table']}
-| | And Honeycomb adds ACL session
-| | ... | ${dut_node} | ${acl_tables['hc_acl_table']['name']}
-| | ... | ${acl_tables['hc_acl_session']}
-| | And Honeycomb enables policer on interface
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${acl_tables['hc_acl_table']['name']}
-| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1}
-| | ... | up
-| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if2}
-| | ... | up
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if1} | ${dut_to_tg_if1_ip} | ${prefix_length}
-| | And Honeycomb sets interface IPv4 address with prefix | ${dut_node}
-| | ... | ${dut_to_tg_if2} | ${dut_to_tg_if2_ip} | ${prefix_length}
-| | And Honeycomb adds interface IPv4 neighbor
-| | ... | ${dut_node} | ${dut_to_tg_if2} | ${tg_to_dut_if2_ip}
-| | ... | ${tg_to_dut_if2_mac}
-| | And VPP Node Interfaces Ready Wait | ${dut_node}
-| | Then Honeycomb Send packet and verify marking | ${tg_node}
-| | ... | ${tg_to_dut_if1}
-| | ... | ${tg_to_dut_if2} | ${tg_to_dut_if1_mac} | ${dut_to_tg_if1_mac}
-| | ... | ${tg_to_dut_if1_ip} | ${tg_to_dut_if2_ip} | ${dscp_number}