CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 138 insertions, 0 deletions

diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot
new file mode 100644
index 0000000000..3b5f365758
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot
@@ -0,0 +1,138 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interface to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/slaac.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+| Force Tags | HC_FUNC
+| ...
+| Documentation | *Honeycomb SLAAC management test suite.*
+| ...
+| Variables | resources/test_data/honeycomb/slaac_variables.py
+
+*** Test Cases ***
+| TC01: Honeycomb can configure SLAAC
+| | [Documentation] | Checks if Honeycomb can congigure SLAAC.
+| | ...
+| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
+| | ... | ${interface}
+| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
+| | ... | ${address} | ${prefix}
+| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data}
+| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
+| | ... | ${interface} | ${slaac_data}
+
+| TC02: Honeycomb can disable SLAAC
+| | [Documentation] | Checks if Honeycomb can disable SLAAC.
+| | ...
+| | Given SLAAC Operational Data From Honeycomb Should Be | ${node}
+| | ... | ${interface} | ${slaac_data}
+| | When Honeycomb removes SLAAC configuration | ${node} | ${interface}
+| | Then SLAAC Operational Data From Honeycomb Should Be empty | ${node}
+| | ... | ${interface}
+
+| TC03: Honeycomb can configure SLAAC with suppress link layer disabled
+| | [Documentation] | Checks if Honeycomb can congigure SLAAC.
+| | ...
+| | [Teardown] | SLAAC test teardown | ${node} | ${interface}
+| | ...
+| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
+| | ... | ${interface}
+| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
+| | ... | ${address} | ${prefix}
+| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data}
+| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
+| | ... | ${interface} | ${slaac_data}
+
+| TC04: Honeycomb can configure SLAAC with sending RA packets disabled
+| | [Documentation] | Checks if Honeycomb can configure SLAAC\
+| | ... | with given settings.
+| | ...
+| | [Teardown] | SLAAC test teardown | ${node} | ${interface}
+| | ...
+| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
+| | ... | ${interface}
+| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
+| | ... | ${address} | ${prefix}
+| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_01}
+| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
+| | ... | ${interface} | ${slaac_data_01}
+
+| TC05: Honeycomb can configure SLAAC with min interval values
+| | [Documentation] | Checks if Honeycomb can configure SLAAC\
+| | ... | with given settings.
+| | ...
+| | [Teardown] | SLAAC test teardown | ${node} | ${interface}
+| | ...
+| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
+| | ... | ${interface}
+| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
+| | ... | ${address} | ${prefix}
+| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_02}
+| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
+| | ... | ${interface} | ${slaac_data_02}
+
+| TC06: Honeycomb can configure SLAAC with max interval values
+| | [Documentation] | Checks if Honeycomb can configure SLAAC\
+| | ... | with given settings.
+| | ...
+| | [Teardown] | SLAAC test teardown | ${node} | ${interface}
+| | ...
+| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
+| | ... | ${interface}
+| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
+| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
+| | ... | ${address} | ${prefix}
+| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_03}
+| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
+| | ... | ${interface} | ${slaac_data_03}
+
+| TC07: DUT retransmits RA on IPv6 enabled interface after a set interval
+# Traffic test failing in VIRL
+| | [Tags] | EXPECTED_FAILING
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG.
+| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
+| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\
+| | ... | to be sent by DUT1 and verify the received RA packets are correct.
+| | ...
+| | [Teardown] | SLAAC test teardown | ${dut_node} | ${dut_to_tg_if1}
+| | ...
+| | Given Configure path in 2-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
+| | And Honeycomb sets interface IPv6 address
+| | ... | ${dut_node} | ${dut_to_tg_if1} | ${address} | ${prefix}
+| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1}
+| | ... | up
+| | When Honeycomb configures SLAAC | ${dut_node} | ${dut_to_tg_if1}
+| | ... | ${slaac_data}
+| | :FOR | ${n} | IN RANGE | ${2}
+| | | Then Receive and verify router advertisement packet
+| | | ... | ${tg_node} | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${20}