HC Tests: move honeycomb tests out of vpp directory

https://gerrit.fd.io/r/#/c/9257/ moved VPP instalation
to vpp/func/__init__.robot,
which is run before Honeycomb suite.

Instalation process starts with removing all vpp packages,
which fails because of honeycomb dependency installed by bootstrap script.

This patch fixes HC func jobs by moving them to separate dir.
The honeycomb/func/__init__.robot was updated
to include previous content of vpp/func/__init__.robot.

HC perf jobs were also moved,
but they may require additional care (CSIT-1006).

Change-Id: I99d94272c80a4c57c85ec5cf99cddfbeab7de663
Signed-off-by: Marek Gradzki <mgradzki@cisco.com>

1 files changed, 0 insertions, 136 deletions

diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot
deleted file mode 100644
index 8a54918032..0000000000
--- a/tests/vpp/func/honeycomb/mgmt-cfg-slaac-apihc-func.robot
+++ /dev/null
@@ -1,136 +0,0 @@
-# Copyright (c) 2017 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Variables ***
-# Interface to run tests on.
-| ${interface}= | ${node['interfaces']['port1']['name']}
-
-*** Settings ***
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
-| Resource | resources/libraries/robot/honeycomb/interfaces.robot
-| Resource | resources/libraries/robot/honeycomb/slaac.robot
-| Resource | resources/libraries/robot/shared/testing_path.robot
-| Resource | resources/libraries/robot/shared/traffic.robot
-| ...
-| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
-| ...
-| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
-| ...
-| Force Tags | HC_FUNC
-| ...
-| Documentation | *Honeycomb SLAAC management test suite.*
-| ...
-| Variables | resources/test_data/honeycomb/slaac_variables.py
-
-*** Test Cases ***
-| TC01: Honeycomb can configure SLAAC
-| | [Documentation] | Checks if Honeycomb can configure SLAAC.
-| | ...
-| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
-| | ... | ${interface}
-| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
-| | ... | ${address} | ${prefix}
-| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data}
-| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${interface} | ${slaac_data}
-
-| TC02: Honeycomb can disable SLAAC
-| | [Documentation] | Checks if Honeycomb can disable SLAAC.
-| | ...
-| | Given SLAAC Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${interface} | ${slaac_data}
-| | When Honeycomb removes SLAAC configuration | ${node} | ${interface}
-| | Then SLAAC Operational Data From Honeycomb Should Be empty | ${node}
-| | ... | ${interface}
-
-| TC03: Honeycomb can configure SLAAC with suppress link layer disabled
-| | [Documentation] | Checks if Honeycomb can configure SLAAC.
-| | ...
-| | [Teardown] | SLAAC test teardown | ${node} | ${interface}
-| | ...
-| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
-| | ... | ${interface}
-| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
-| | ... | ${address} | ${prefix}
-| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data}
-| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${interface} | ${slaac_data}
-
-| TC04: Honeycomb can configure SLAAC with sending RA packets disabled
-| | [Documentation] | Checks if Honeycomb can configure SLAAC\
-| | ... | with given settings.
-| | ...
-| | [Teardown] | SLAAC test teardown | ${node} | ${interface}
-| | ...
-| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
-| | ... | ${interface}
-| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
-| | ... | ${address} | ${prefix}
-| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_01}
-| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${interface} | ${slaac_data_01}
-
-| TC05: Honeycomb can configure SLAAC with min interval values
-| | [Documentation] | Checks if Honeycomb can configure SLAAC\
-| | ... | with given settings.
-| | ...
-| | [Teardown] | SLAAC test teardown | ${node} | ${interface}
-| | ...
-| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
-| | ... | ${interface}
-| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
-| | ... | ${address} | ${prefix}
-| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_02}
-| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${interface} | ${slaac_data_02}
-
-| TC06: Honeycomb can configure SLAAC with max interval values
-| | [Documentation] | Checks if Honeycomb can configure SLAAC\
-| | ... | with given settings.
-| | ...
-| | [Teardown] | SLAAC test teardown | ${node} | ${interface}
-| | ...
-| | Given SLAAC Operational Data From Honeycomb Should Be empty | ${node}
-| | ... | ${interface}
-| | And Honeycomb Configures Interface State | ${node} | ${interface} | up
-| | And Honeycomb sets interface IPv6 address | ${node} | ${interface}
-| | ... | ${address} | ${prefix}
-| | When Honeycomb configures SLAAC | ${node} | ${interface} | ${slaac_data_03}
-| | Then SLAAC Operational Data From Honeycomb Should Be | ${node}
-| | ... | ${interface} | ${slaac_data_03}
-
-| TC07: DUT retransmits RA on IPv6 enabled interface after a set interval
-| | [Documentation]
-| | ... | [Top] TG-DUT1-DUT2-TG.
-| | ... | [Cfg] On DUT1 configure IPv6 interface on the link to TG.
-| | ... | [Ver] Make TG wait for two IPv6 Router Advertisement packets\
-| | ... | to be sent by DUT1 and verify the received RA packets are correct.
-| | ...
-| | [Teardown] | SLAAC test teardown | ${dut_node} | ${dut_to_tg_if1}
-| | ...
-| | Given Configure path in 2-node circular topology
-| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['TG']}
-| | And Honeycomb sets interface IPv6 address
-| | ... | ${dut_node} | ${dut_to_tg_if1} | ${address} | ${prefix}
-| | And Honeycomb configures interface state | ${dut_node} | ${dut_to_tg_if1}
-| | ... | up
-| | When Honeycomb configures SLAAC | ${dut_node} | ${dut_to_tg_if1}
-| | ... | ${slaac_data}
-| | :FOR | ${n} | IN RANGE | ${2}
-| | | Then Receive and verify router advertisement packet
-| | | ... | ${tg_node} | ${tg_to_dut_if1} | ${dut_to_tg_if1_mac} | ${20}