CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 168 insertions, 0 deletions

diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot
new file mode 100644
index 0000000000..680baf1130
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-vxlangpe-apihc-apivat-func.robot
@@ -0,0 +1,168 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interface to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+# Parameters to be set on existing interface
+| ${vxlan_gpe_existing_if}= | ${interface}
+| &{vxlan_gpe_base_wrong_interface_settings}=
+| ... | name=${vxlan_gpe_existing_if}
+| ... | type=iana-if-type:ethernetCsmacd
+| ... | description=for testing purposes
+| ... | enabled=true
+| ... | link-up-down-trap-enable=enabled
+| &{vxlan_gpe_wrong_interface_settings}=
+| ... | local=192.168.50.77
+| ... | remote=192.168.50.72
+| ... | vni=${9}
+| ... | next-protocol=wrong_ipv4
+| ... | encap-vrf-id=${0}
+| ... | decap-vrf-id=${0}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/vxlan_gpe.robot
+# Import additional VxLAN GPE settings from resource file
+| Variables | resources/test_data/honeycomb/vxlan_gpe.py
+| ...
+| Documentation | *Honeycomb VxLAN-GPE management test suite.*
+| ...
+| Suite Setup | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Tear Down Honeycomb Functional Test Suite | ${node}
+| ...
+# Disabled due to VPP-875: Configuring VxLAN GPE tunnel crashes VPP
+#| Force Tags | HC_FUNC
+
+*** Test Cases ***
+| TC01: Honeycomb creates VxLAN GPE tunnel
+| | [Documentation] | Check if Honeycomb API can configure a VxLAN GPE tunnel.
+| | ...
+| | Given interface Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | And interface Operational Data From VAT Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | When Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
+| | Then VxLAN GPE Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
+| | And VxLAN GPE Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
+| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
+| | ... | ${node} | ${vxlan_gpe_if1}
+
+| TC02: Honeycomb removes VxLAN GPE tunnel
+| | [Documentation] | Check if Honeycomb API can remove VxLAN GPE tunnel.
+| | ...
+| | Given VxLAN GPE Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | ... | ${vxlan_gpe_base_settings} | ${vxlan_gpe_settings}
+| | VxLAN GPE Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_gpe_if1} | ${vxlan_gpe_settings}
+| | When Honeycomb removes VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | Then VxLAN GPE Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if1}
+| | And VxLAN GPE Operational Data From VAT Should Be empty
+| | ... | ${node}
+
+| TC03: Honeycomb sets wrong interface type while creating VxLAN GPE tunnel
+| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
+| | ... | with a wrong interface type set.
+| | ...
+| | Given interface Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | And interface Operational Data From VAT Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | When Honeycomb fails to create VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | ... | ${vxlan_gpe_wrong_type_base_settings} | ${vxlan_gpe_settings}
+| | Then interface Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if2}
+| | And interface Operational Data From VAT Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if2}
+
+| TC04: Honeycomb sets wrong protocol while creating VxLAN GPE tunnel
+| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
+| | ... | with a wrong next-protocol set.
+| | ...
+| | Given interface Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if3}
+| | And interface Operational Data From VAT Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if3}
+| | When Honeycomb fails to create VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if3}
+| | ... | ${vxlan_gpe_wrong_protocol_base_settings}
+| | ... | ${vxlan_gpe_wrong_protocol_settings}
+| | Then interface Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if3}
+| | And interface Operational Data From VAT Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if3}
+
+| TC05: Honeycomb sets VxLAN GPE tunnel on existing interface with wrong type
+| | [Documentation] | Check if Honeycomb refuses to create a VxLAN GPE tunnel\
+| | ... | on existing interface with wrong type.
+| | ...
+| | Given VxLAN GPE Operational Data From VAT Should Be empty
+| | ... | ${node}
+| | When Honeycomb fails to create VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_existing_if}
+| | ... | ${vxlan_gpe_base_wrong_interface_settings}
+| | ... | ${vxlan_gpe_wrong_interface_settings}
+| | Then VxLAN GPE Operational Data From VAT Should Be empty
+| | ... | ${node}
+
+| TC06: Honeycomb creates VxLAN GPE tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure a VxLAN GPE tunnel\
+| | ... | with IPv6 addresses.
+| | ...
+| | Given VxLAN GPE Operational Data From VAT Should Be empty
+| | ... | ${node}
+| | And VxLAN GPE Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if5}
+| | When Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if5}
+| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
+| | Then VxLAN GPE Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vxlan_gpe_if5}
+| | ... | ${vxlan_gpe_base_ipv6_settings} | ${vxlan_gpe_ipv6_settings}
+| | And Run Keyword And Continue On Failure
+| | ... | VxLAN GPE Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_gpe_if5} | ${vxlan_gpe_ipv6_settings}
+| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
+| | ... | ${node} | ${vxlan_gpe_if5}
+
+| TC07: Honeycomb creates a second VxLAN GPE tunnel with ipv6
+| | [Documentation] | Check if Honeycomb API can configure another VxLAN\
+| | ... | GPE tunnel with IPv6 addresses.
+| | ...
+| | Given interface Operational Data From Honeycomb Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if6}
+| | And interface Operational Data From VAT Should Be empty
+| | ... | ${node} | ${vxlan_gpe_if6}
+| | When Honeycomb creates VxLAN GPE interface
+| | ... | ${node} | ${vxlan_gpe_if6}
+| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
+| | Then VxLAN GPE Operational Data From Honeycomb Should Be
+| | ... | ${node} | ${vxlan_gpe_if6}
+| | ... | ${vxlan_gpe_base_ipv6_settings2} | ${vxlan_gpe_ipv6_settings2}
+| | And VxLAN GPE Operational Data From VAT Should Be
+| | ... | ${node} | ${vxlan_gpe_if6} | ${vxlan_gpe_ipv6_settings2}
+| | And VxLAN GPE Interface indices from Honeycomb and VAT should correspond
+| | ... | ${node} | ${vxlan_gpe_if6}