CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 169 insertions, 0 deletions

diff --git a/tests/vpp/func/honeycomb/mgmt-statepersist-apihc-func.robot b/tests/vpp/func/honeycomb/mgmt-statepersist-apihc-func.robot
new file mode 100644
index 0000000000..1d3ce02e05
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-statepersist-apihc-func.robot
@@ -0,0 +1,169 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables***
+# Interface to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/persistence.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/bridge_domain.robot
+| Resource | resources/libraries/robot/honeycomb/l2_fib.robot
+| ...
+| Suite Setup | Run Keywords
+| ... | Configure Persistence | ${node} | enable | AND
+| ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| ...
+| Suite Teardown | Configure Persistence | ${node} | disable
+| ...
+| Force Tags | HC_PERSIST | HC_REST_ONLY
+| ...
+| Documentation | *Honeycomb configuration persistence test suite.*
+
+*** Test Cases ***
+# multi-feature cases
+# ===================
+| TC01: Honeycomb persists configuration through restart of both Honeycomb and VPP
+| | [Documentation] | Checks if Honeycomb maintains configuration after both\
+| | ... | Restart Honeycomb and VPP.
+| | ...
+# Failing due to HC2VPP-47
+| | [Tags] | HC_FUNC | EXPECTED_FAILING
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
+| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
+| | And Log persisted configuration on node | ${node}
+| | When Restart Honeycomb and VPP in pesistence test | ${node}
+| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
+
+| TC02: Honeycomb reverts to defaults if persistence files are invalid
+| | [Documentation] | Checks if Honeycomb reverts to default configuration when\
+| | ... | persistence files are damaged or invalid.
+| | ...
+| | [Tags] | HC_FUNC
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
+| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
+| | When Persistence file is damaged during restart | ${node}
+| | Then Honeycomb and VPP should have default configuration | ${node}
+
+| TC03: Honeycomb persists configuration through restart of Honeycomb
+| | [Documentation] | Checks if Honeycomb maintains configuration after it\
+| | ... | is restarted.
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
+| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
+| | And Log persisted configuration on node | ${node}
+| | When Restart Honeycomb | ${node}
+| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
+
+| TC04: Honeycomb persists configuration through restart of VPP
+| | [Documentation] | Checks if Honeycomb updates VPP settings after VPP is\
+| | ... | restarted.
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Multi-Feature Persistence test configuration | ${node} | ${interface}
+| | And Multi-Feature persistence Test Verification | ${node} | ${interface}
+| | And Log persisted configuration on node | ${node}
+| | When Restart VPP | ${node}
+| | Then Multi-Feature persistence Test Verification | ${node} | ${interface}
+
+# single-feature cases
+# ====================
+
+| TC05: Persist configuration of IP addresses and neighbors - HC and VPP restart
+| | [Documentation] | Verify persistence of interface state, IPv4 address
+| | ... | and neighbor entries through restart of both Honeycomb and VPP.
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Interface Persistence Setup | ${node}
+| | And Interface Persistence Check | ${node}
+| | When Restart Honeycomb and VPP in pesistence test | ${node}
+| | Then Interface Persistence Check | ${node}
+
+| TC06: Persist configuration of IP addresses and neighbors - HC restart
+| | [Documentation] | Verify persistence of interface state, IPv4 address
+| | ... | and neighbor entries through restart of Honeycomb.
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Interface Persistence Setup | ${node}
+| | And Interface Persistence Check | ${node}
+| | When Restart Honeycomb | ${node}
+| | Then Interface Persistence Check | ${node}
+
+| TC07: Persist configuration of IP addresses and neighbors - VPP restart
+| | [Documentation] | Verify persistence of interface state, IPv4 address
+| | ... | and neighbor entries through restart of VPP.
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Interface Persistence Setup | ${node}
+| | And Interface Persistence Check | ${node}
+| | When Restart VPP | ${node}
+| | Then Interface Persistence Check | ${node}
+
+| TC08: Honeycomb persists configuration of bridge domains - HC and VPP restart
+| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry
+| | ... | and Bridge domain Operational Interface Assignment through restart
+| | ... | of both Honeycomb and VPP.
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Bridge Domain Persistence Setup | ${node}
+| | When Restart Honeycomb and VPP in pesistence test | ${node}
+| | Then Bridge Domain Persistence Check | ${node}
+
+| TC09: Honeycomb persists configuration of bridge domains - HC restart
+| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry
+| | ... | and Bridge domain Operational Interface Assignment through restart
+| | ... | of Honeycomb.
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Bridge Domain Persistence Setup | ${node}
+| | When Restart Honeycomb | ${node}
+| | Then Bridge Domain Persistence Check | ${node}
+
+| TC10: Honeycomb persists configuration of bridge domains - VPP restart
+| | [Documentation] | Verify persistence of bridge domain, L2-FIB entry
+| | ... | and Bridge domain Operational Interface Assignment through restart
+| | ... | of VPP.
+| | ...
+| | [Teardown]
+| | ... | Restart Honeycomb And VPP And Clear Persisted Configuration | ${node}
+| | ...
+| | Given Bridge Domain Persistence Setup | ${node}
+| | When Restart VPP | ${node}
+| | Then Bridge Domain Persistence Check | ${node}
+
+#TODO: All other features