aboutsummaryrefslogtreecommitdiffstats
path: root/tests/vpp/func/honeycomb
diff options
context:
space:
mode:
authorselias <samelias@cisco.com>2017-09-29 15:31:06 +0200
committerselias <samelias@cisco.com>2017-10-11 15:48:59 +0200
commit5a02dd13563a5c67e336f04eb526cbea206da29b (patch)
treecd4806d4a3d1ea1502aee26a1d743c100262063a /tests/vpp/func/honeycomb
parentbdfca054d8425a57496cca8308da36c118b5340f (diff)
CSIT-811 HC Test: BGP tests - IPv4 CRUD
Tests configure BGP neighbor peers and simple routes for these peers. Change-Id: I5102986d710551a451e838d934cc9650bcd38a60 Signed-off-by: selias <samelias@cisco.com>
Diffstat (limited to 'tests/vpp/func/honeycomb')
-rw-r--r--tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot163
1 files changed, 163 insertions, 0 deletions
diff --git a/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot b/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot
new file mode 100644
index 0000000000..da662dbc69
--- /dev/null
+++ b/tests/vpp/func/honeycomb/mgmt-cfg-bgp-apihc-apivat-func.robot
@@ -0,0 +1,163 @@
+# Copyright (c) 2017 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Variables ***
+# Interface to run tests on.
+| ${interface}= | ${node['interfaces']['port1']['name']}
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/honeycomb/honeycomb.robot
+| Resource | resources/libraries/robot/honeycomb/interfaces.robot
+| Resource | resources/libraries/robot/honeycomb/bgp.robot
+| Resource | resources/libraries/robot/honeycomb/routing.robot
+| Variables | resources/test_data/honeycomb/bgp.py
+| ...
+| Suite Setup | Run Keywords
+| ... | Enable Honeycomb Feature | ${node} | BGP | AND
+| ... | Set Up Honeycomb Functional Test Suite | ${node}
+| ...
+| Suite Teardown | Run Keywords
+| ... | Tear Down Honeycomb Functional Test Suite | ${node} | AND
+| ... | Disable Honeycomb Feature | ${node} | BGP
+| ...
+| Force Tags | HC_FUNC
+| ...
+| Documentation | *Honeycomb BGP management test suite.*
+
+*** Test Cases ***
+| TC01: Honeycomb configures BGP peer - Internal
+| | [Documentation] | Check if Honeycomb can configure an internal BGP peer.
+| | ...
+| | When Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | Then BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+
+| TC03: Honeycomb removes peer configuration
+| | [Documentation] | Check if Honeycomb can remove a configured BGP peer.
+| | ...
+| | Given BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | When Honeycomb removes BGP peer | ${node} | ${address_internal}
+| | Then No BGP peers should be configured | ${node}
+
+| TC02: Honeycomb updates existing BGP peer - Internal
+| | [Documentation] | Check if Honeycomb can update an existing BGP peer.
+| | ...
+| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_internal}
+| | ...
+| | Given No BGP peers should be configured | ${node}
+| | When Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal_update}
+| | Then BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal_update}
+
+| TC04: Honeycomb configures BGP peer - Application
+| | [Documentation] | Check if Honeycomb can configure an application BGP peer.
+| | ...
+| | [Teardown] | Honeycomb removes BGP peer | ${node} | ${address_application}
+| | ...
+| | Given No BGP peers should be configured | ${node}
+| | When Honeycomb adds BGP peer
+| | ... | ${node} | ${address_application} | ${peer_application}
+| | Then BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_application} | ${peer_application}
+
+| TC05: Honeycomb configures a second BGP peer
+| | [Documentation] | Check if Honeycomb can configure more than one BGP peer.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal} | AND
+| | ... | Honeycomb removes BGP peer | ${node} | ${address_internal2}
+| | ...
+| | Given No BGP peers should be configured | ${node}
+| | When Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal2} | ${peer_internal2}
+| | Then BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal2} | ${peer_internal2}
+
+| TC06: Honeycomb configures IPv4 route using BGP
+| | [Documentation] | Check if Honeycomb can configure a BGP route under a peer.
+| | ...
+| | Given Honeycomb adds BGP peer
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | When Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | Then BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+
+| TC08: Honeycomb removes IPv4 route configuration
+| | [Documentation] | Check if Honeycomb can remove a configured BGP route.
+| | ...
+| | Given BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | When Honeycomb removes BGP route | ${node} | ${address_internal}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | Then No BGP Routes Should be Configured
+| | ... | ${node} | ${address_internal} | ipv4
+
+| TC07: Honeycomb updates existing IPv4 route using BGP
+| | [Documentation] | Check if Honeycomb can update an existing BGP route.
+| | ...
+| | [Teardown] | Honeycomb removes BGP route | ${node} | ${address_internal}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | ...
+| | Given BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | And No BGP Routes Should be Configured
+| | ... | ${node} | ${address_internal} | ipv4
+| | When Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | And Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | Then BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4_update}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+
+| TC09: Honeycomb configures a second IPv4 route
+| | [Documentation] | Check if Honeycomb can configure more than one BGP route.
+| | ...
+| | [Teardown] | Run Keywords
+| | ... | Honeycomb removes BGP route | ${node} | ${address_internal}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4 | AND
+| | ... | Honeycomb removes BGP route | ${node} | ${address_internal}
+| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4
+| | ...
+| | Given BGP peer from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${peer_internal}
+| | When Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | And Honeycomb configures BGP route
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2}
+| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4
+| | Then BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4}
+| | ... | ${route_address_ipv4} | ${route_id_ipv4} | ipv4
+| | And BGP Route from Honeycomb should be
+| | ... | ${node} | ${address_internal} | ${route_data_ipv4_2}
+| | ... | ${route_address_ipv4_2} | ${route_id_ipv4_2} | ipv4