CSIT-687: Directory structure reorganization

Change-Id: I772c9e214be2461adf58124998d272e7d795220f
Signed-off-by: Tibor Frank <tifrank@cisco.com>
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>

1 files changed, 134 insertions, 0 deletions

diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot
new file mode 100644
index 0000000000..71246c2c57
--- /dev/null
+++ b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-rpf-func.robot
@@ -0,0 +1,134 @@
+# Copyright (c) 2016 Cisco and/or its affiliates.
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+*** Settings ***
+| Resource | resources/libraries/robot/shared/default.robot
+| Resource | resources/libraries/robot/shared/counters.robot
+| Resource | resources/libraries/robot/shared/interfaces.robot
+| Resource | resources/libraries/robot/shared/testing_path.robot
+| Resource | resources/libraries/robot/ip/ip4.robot
+| Resource | resources/libraries/robot/l2/l2_xconnect.robot
+| Resource | resources/libraries/robot/shared/traffic.robot
+| Library | resources.libraries.python.Trace
+| Force Tags | HW_ENV | VM_ENV | 3_NODE_SINGLE_LINK_TOPO
+| Test Setup | Set up functional test
+| Test Teardown | Tear down functional test
+| Documentation | *Source RPF check on IPv4 test cases*
+| ...
+| ... | *[Top] Network Topologies:* TG - DUT1 - DUT2 - TG
+| ... |        with one link between the nodes.
+| ... | *[Cfg] DUT configuration:* DUT2 is configured with L2 Cross connect.
+| ... |        DUT1 is configured with IP source check on link to TG,
+| ... | *[Ver] TG verification:* Test ICMP Echo Request packets are sent
+| ... |        in one direction by TG on link to DUT1 and received on TG link
+| ... |        to DUT2. On receive TG verifies if packets which source address
+| ... |        is not in routes are dropped.
+
+*** Variables ***
+| ${dut1_to_tg_ip}= | 192.168.1.1
+| ${dut1_to_tg_ip_GW}= | 192.168.1.2
+| ${dut1_to_dut2_ip}= | 192.168.2.1
+| ${dut1_to_dut2_ip_GW}= | 192.168.2.2
+| ${test_dst_ip}= | 32.0.0.1
+| ${pass_test_src_ip}= | 16.0.0.1
+| ${drop_test_src_ip}= | 24.0.0.1
+| ${prefix_length}= | 24
+
+*** Test Cases ***
+| TC01: VPP source RPF check on IPv4 src-addr
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG
+| | ... | [Cfg] On DUT1 setup IP source check.
+| | ... | [Ver] Make TG verify matching packets which source address
+| | ... | is not in routes are dropped.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} | resolve_attempts=${NONE}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW}
+| | ... | ${tg_to_dut1_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length}
+| | ... | ${dut1_to_tg_ip_GW} | ${dut1_to_tg} | resolve_attempts=${NONE}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | Then Send packet and verify headers | ${tg_node}
+| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg}
+| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name}
+| | Then Send packet and verify headers | ${tg_node}
+| | ... | ${pass_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${dut1_to_tg_ip_GW} | ${test_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+| | And Packet transmission from port to port should fail | ${tg_node}
+| | ... | ${drop_test_src_ip} | ${test_dst_ip} | ${tg_to_dut1}
+| | ... | ${tg_to_dut1_mac} | ${dut1_to_tg_mac} | ${tg_to_dut2}
+| | ... | ${dut1_to_dut2_mac} | ${tg_to_dut2_mac}
+
+| TC02: VPP pass traffic on non-enabled RPF interface
+| | [Documentation]
+| | ... | [Top] TG-DUT1-DUT2-TG
+| | ... | [Cfg] On DUT1 setup IP source check.
+| | ... | [Ver] Make TG verify matching packets on non-enabled RPF interface
+| | ... | are passed.
+| | Given Configure path in 3-node circular topology
+| | ... | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
+| | And Set interfaces in 3-node circular topology up
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_tg} | ${dut1_to_tg_ip} | ${prefix_length}
+| | And Set Interface Address | ${dut1_node}
+| | ... | ${dut1_to_dut2} | ${dut1_to_dut2_ip} | ${prefix_length}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_to_dut2} | ${dut1_to_dut2_ip_GW}
+| | ... | ${tg_to_dut2_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${test_dst_ip} | ${prefix_length}
+| | ... | ${dut1_to_dut2_ip_GW} | ${dut1_to_dut2} | resolve_attempts=${NONE}
+| | And Add Arp On Dut
+| | ... | ${dut1_node} | ${dut1_to_tg} | ${dut1_to_tg_ip_GW}
+| | ... | ${tg_to_dut1_mac}
+| | And Vpp Route Add
+| | ... | ${dut1_node} | ${pass_test_src_ip} | ${prefix_length}
+| | ... | ${dut1_to_tg_ip_GW} | ${dut1_to_tg} | resolve_attempts=${NONE}
+| | And Configure L2XC
+| | ... | ${dut2_node} | ${dut2_to_dut1} | ${dut2_to_tg}
+| | ${dut1_to_tg_name}= | Get Interface Name | ${dut1_node} | ${dut1_to_tg}
+| | When VPP IP Source Check Setup | ${dut1_node} | ${dut1_to_tg_name}
+| | Then Send packet and verify headers | ${tg_node}
+| | ... | ${test_dst_ip} | ${pass_test_src_ip} | ${tg_to_dut2}
+| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}
+| | And Send packet and verify headers | ${tg_node}
+| | ... | ${test_dst_ip} | ${dut1_to_tg_ip_GW} | ${tg_to_dut2}
+| | ... | ${tg_to_dut2_mac} | ${dut1_to_dut2_mac} | ${tg_to_dut1}
+| | ... | ${dut1_to_tg_mac} | ${tg_to_dut1_mac}