vpp_device: TAP

Change-Id: Ife31921daaa5a87f64e61d2eebb98bfdded1dc76
Signed-off-by: Peter Mikus <pmikus@cisco.com>

1 files changed, 0 insertions, 140 deletions

diff --git a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-func.robot b/tests/vpp/func/ip4/eth2p-ethip4-ip4base-func.robot
deleted file mode 100644
index 1b4f8cdb4a..0000000000
--- a/tests/vpp/func/ip4/eth2p-ethip4-ip4base-func.robot
+++ /dev/null
@@ -1,140 +0,0 @@
-# Copyright (c) 2016 Cisco and/or its affiliates.
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at:
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-*** Settings ***
-| Library | resources.libraries.python.NodePath
-| Library | resources.libraries.python.Trace
-| Resource | resources/libraries/robot/shared/default.robot
-| Resource | resources/libraries/robot/shared/interfaces.robot
-| Resource | resources/libraries/robot/ip/ip4.robot
-| Force Tags | 3_NODE_SINGLE_LINK_TOPO | HW_ENV | SKIP_VPP_PATCH
-| Suite Setup | Run Keywords
-| ... | Restart Vpp Service On All Duts | ${nodes} | AND
-| ... | Verify Vpp On All Duts | ${nodes} | AND
-| ... | VPP Enable Traces On All Duts | ${nodes} | AND
-| ... | Configure all TGs for traffic script | AND
-| ... | Update All Interface Data On All Nodes | ${nodes} | AND
-| ... | Configure DUT nodes for IPv4 testing
-| Test Setup | Run Keywords | Save VPP PIDs | AND
-| ... | Reset PAPI History On All DUTs | ${nodes} | AND
-| ... | Clear interface counters on all vpp nodes in topology | ${nodes}
-| Test Teardown | Run Keywords
-| ... | Show packet trace on all DUTs | ${nodes} | AND
-| ... | Show PAPI History On All DUTs | ${nodes} | AND
-| ... | Verify VPP PID in Teardown
-| Documentation | *IPv4 routing test cases*
-| ...
-| ... | RFC791 IPv4, RFC826 ARP, RFC792 ICMPv4. Encapsulations: Eth-IPv4-ICMPv4
-| ... | on links TG-DUT1, TG-DUT2, DUT1-DUT2. IPv4 routing tests use circular
-| ... | 3-node topology TG - DUT1 - DUT2 - TG with one link between the nodes.
-| ... | DUT1 and DUT2 are configured with IPv4 routing and static routes. Test
-| ... | ICMPv4 Echo Request packets are sent in both directions by TG on links
-| ... | to DUT1 and DUT2 and received on TG links on the other side of circular
-| ... | topology. On receive TG verifies packets IPv4 src-addr, dst-addr and MAC
-| ... | addresses.
-
-*** Test Cases ***
-
-| TC01: DUT replies to ICMPv4 Echo Req to its ingress interface
-| | [Documentation]
-| | ... | Make TG send ICMPv4 Echo Req to DUT ingress interface. Make TG\
-| | ... | verify ICMP Echo Reply is correct.
-| | [Tags] | VM_ENV
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
-| | Compute Path
-| | ${src_port} | ${src_node}= | First Interface
-| | ${dst_port} | ${dst_node}= | Last Interface
-| | ${hops}= | Set Variable | ${0}
-| | Route traffic from interface '${src_port}' on node '${src_node}' to interface '${dst_port}' on node '${dst_node}' '${hops}' hops away using IPv4
-
-| TC02: DUT routes IPv4 to its egress interface
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv4 Echo Req towards DUT1 egress interface\
-| | ... | connected to DUT2. Make TG verify ICMPv4 Echo Reply is correct.
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | Compute Path
-| | ${src_port} | ${src_node}= | First Interface
-| | ${dst_port} | ${dst_node}= | Last Egress Interface
-| | ${hops}= | Set Variable | ${0}
-| | Route traffic from interface '${src_port}' on node '${src_node}' to interface '${dst_port}' on node '${dst_node}' '${hops}' hops away using IPv4
-
-| TC03: DUT1 routes IPv4 to DUT2 ingress interface
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv4 Echo Req towards DUT2 ingress interface\
-| | ... | connected to DUT1. Make TG verify ICMPv4 Echo Reply is correct.
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']}
-| | Compute Path
-| | ${src_port} | ${src_node}= | First Interface
-| | ${dst_port} | ${dst_node}= | Last Interface
-| | ${hops}= | Set Variable | ${1}
-| | Route traffic from interface '${src_port}' on node '${src_node}' to interface '${dst_port}' on node '${dst_node}' '${hops}' hops away using IPv4
-
-| TC04: DUT1 routes IPv4 to DUT2 egress interface
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv4 Echo Req towards DUT2 egress interface\
-| | ... | connected to TG. Make TG verify ICMPv4 Echo Reply is correct.
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | Compute Path
-| | ${src_port} | ${src_node}= | First Interface
-| | ${dst_port} | ${dst_node}= | Last Egress Interface
-| | ${hops}= | Set Variable | ${1}
-| | Route traffic from interface '${src_port}' on node '${src_node}' to interface '${dst_port}' on node '${dst_node}' '${hops}' hops away using IPv4
-
-| TC05: DUT1 and DUT2 route IPv4 between TG interfaces
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv4 Echo Req between its interfaces across DUT1\
-| | ... | and DUT2. Make TG verify ICMPv4 Echo Replies are correct.
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']} | ${nodes['DUT2']} | ${nodes['TG']}
-| | Compute Path
-| | ${src_port} | ${src_node}= | First Interface
-| | ${dst_port} | ${dst_node}= | Last Interface
-| | ${hops}= | Set Variable | ${2}
-| | Route traffic from interface '${src_port}' on node '${src_node}' to interface '${dst_port}' on node '${dst_node}' '${hops}' hops away using IPv4
-
-| TC06: DUT replies to ICMPv4 Echo Reqs with size 64B-to-1500B-incr-1B
-| | [Tags] | VM_ENV
-| | [Documentation]
-| | ... | Make TG send ICMPv4 Echo Reqs to DUT ingress interface,\
-| | ... | incrementating frame size from 64B to 1500B with increment step
-| | ... | of 1Byte. Make TG verify ICMP Echo Replies are correct.
-| | Execute IPv4 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']} | 0 | 1452 | 1
-
-| TC07: DUT replies to ICMPv4 Echo Reqs with size 1500B-to-9000B-incr-10B
-| | [Documentation]
-| | ... | Make TG send ICMPv4 Echo Reqs to DUT ingress interface,\
-| | ... | incrementating frame size from 1500B to 9000B with increment
-| | ... | step of 10Bytes. Make TG verify ICMPv4 Echo Replies are correct.
-| | [Setup] | Configure MTU on TG based on MTU on DUT | ${nodes['TG']} | ${nodes['DUT1']}
-| | [Teardown] | Run keywords
-| | ... | Set default Ethernet MTU on all interfaces on node | ${nodes['TG']}
-| | ... | AND | Verify VPP PID in Teardown
-| | Append Nodes | ${nodes['TG']} | ${nodes['DUT1']}
-| | Compute Path
-| | ${dut_port} | ${dut_node}= | Last Interface
-| | ${mtu}= | Get Interface MTU | ${dut_node} | ${dut_port}
-| | # ICMP payload size is frame size minus size of Ehternet header, FCS,
-| | # IPv4 header and ICMP header
-| | ${end_size}= | Evaluate | ${mtu} - 14 - 4 - 20 - 8
-| | Run Keyword If | ${mtu} > 1518
-| | ... | Execute IPv4 ICMP echo sweep | ${nodes['TG']} | ${nodes['DUT1']}
-| | ... | 1452 | ${end_size} | 10
-
-| TC08: DUT replies to ARP request
-| | [Tags] | VM_ENV | SKIP_VPP_PATCH
-| | [Documentation]
-| | ... | Make TG send ARP Request to DUT and verify ARP Reply is correct.\
-| | Send ARP request and verify response | ${nodes['TG']} | ${nodes['DUT1']}